|
|
Fully automatic single, or dual direction operation.
'MAX-grip™' warping drum for independent rope hauling only.
Optional dual anchor handling with smooth independent control of each chainwheel via cone clutches.
Chainpipe and stripper included.
Cone-type brake/clutch mechanism permits manual 'free-fall' anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement ensuring safe and precise operator control.
Chainwheel locking pawl.
Simple deck mounted installation with no under deck parts.
Simplified maintenance with ability to strip the running gear (chainwheel and capstan drum) from the winch without disturbing the winch mounting.
Heavy duty, dual-direction electric motors. Isolated ground type with durable class F insulation throughout motor.
The gearbox has a high-efficiency output drive with heavy-duty wide-face, precision, bronze spur gears in a sealed oil bath. It is removable as a sealed unit for servicing. (Specifications differ depending on motor and winch rating).
Chainwheel and warping drum of high-quality chrome finish over marine-grade alloy bronze.
Marine-grade pretreated alloy casing, powder coated and finished with a two component white polyurethane paint.
|
|
Provides the versatility of operating two anchors from one winch.
Rope hauling from any direction using independent 'MAX-grip™' warping drum with clutch disengagement of chainwheel.
Permits use of traditional shackle and thimble rope and chain connection.
Alternative horizontal mounting inside chain locker for below deck installation.
High-quality finish on above deck components. Heavy chrome over marine-grade alloy bronze.
Cone type brake/clutch mechanism permits manual "free-fall" anchoring.
Cone clutches, unlike dog clutches, provide smooth progressive engagement ensuring safe operator control.
Chainwheel locking pawl (except 500 and 800 Series).
Simplified through deck installation by modular design and precise alignment of gearbox to the top works utilising marine-grade stainless steel studs.
The gearbox has a high efficiency output drive with heavy-duty, wide-face, precision, bronze spur gears in a sealed oil bath. (Specifications differ depending on motor and winch rating)
Marine-grade alloy gearbox housing, finished with a two coat paint system.
Oil level inspection sight glass for quick inspection of correct oil level.
|
|
CALIPSO
This is the new INMARE design of a protection system for anchor windlasses.
It avoids any anchor traction loads on the windlass.
It provides protection for the anchorage.
Refined with a hand-made splice, it is equipped with a 14 mm polyester line, an outstanding shock absorber and a hook that can be installed on 6-12 mm chains.
|
|
| ... products without information |
| |
Jet Ski trailer
Tipping, without brakes
Provided with supports for jet ski
|
|
Intended for the crazy ones of "jets", these trailers use all the components of the "Blue Way" range : automatic coupling system, galvanised frame, galvanised arms and beam axle with dismountable hubs (conical bearings) and lighting board with protected monoblocs lights.
|
|
Carriage of setting to water Towable aluminum for Jet with Arm
Leger-Dismountable-Adjustable-towable JET3L |
|
Carriage of setting to water Towable aluminum for Jet with Saddle
Leger-Dismountable-Adjustable-towable JET4L
carriage of setting to water JET4L
Frame Anodic Aluminum
Wheel axle stainless
7 shoes of yellow protection (good visibility)
2 low wheels pressure dismountable
Dismountable tiller of traction
1 head of attachment
1 winch with strap
Nuts and bolts stainless
Overall length: 2m75
Length of the slopes: 1m20
Total width: 1m10 Distance between centres of the slopes: 0m51
Total height: 0m49
Weight: 35kg
Payload 450kg |
|
Carriage of workshop aluminum for Jet with Arm & Jet with Saddle
Leger-Handy-robust AJB & AJS |
|
Carriage of setting to water aluminum for Jet with Arm
Leger-Dismountable-adjustable JET1 & JET1L |
|
| ... products without information |
| |
CALIPSO
This is the new INMARE design of a protection system for anchor windlasses.
It avoids any anchor traction loads on the windlass.
It provides protection for the anchorage.
Refined with a hand-made splice, it is equipped with a 14 mm polyester line, an outstanding shock absorber and a hook that can be installed on 6-12 mm chains.
|
|
| ... products without information |
| |
... see all the products in the category
Covers
|
| ... products without information |
| |
|
|
see the results for the following category
