|
|
| The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, facilitating operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature. |
|
Enables the operator to visually check anchor retrieval or lowering from the bow if vision is obstructed.
Plugs into a waterproof socket on the foredeck or in the cockpit or wheelhouse.
Includes marine plug and socket.
Available in two cable lengths: 4 metres (13 feet) or 9 metres (29 feet)
Suitable for use with DC 12V or 24V dual-directional solenoids.
Other models available
|
|
| ... products without information |
| |
Deck Line Pedestals
You may require an alternative to our standard pedestals and this is where the Deck Line Range comes into it's own. Low level and with directional illumination via a PL9 lamp, the main pedestal can incorporate up to four socket outlets. Manufactured from 2.0mm aluminium around a 3.0mm aluminium chassis the complete unit is then electro-statically oven baked in marine blue as shown but is also available in a variety of colours. This unit can also be utilised as a controller housing further switchgear to supply satellite connection units at adjacent berths. |
|
The Harbour-In concept:
Harbour-In is a full-service range of marina facilities for flush mounted installation in the pontoon decking on marinas.
Flatbox distribution box:
Flush mounted pontoon distribution board called "Flatbox". Cover made from stainless steel, and provided with lock. Easy opening and closing of the cover. Cover provided with cylinder lock and protected against dirt. Cover suitable to walk over and wheel over luggage carts. |
|
Harbour-In Connection boxes for electrical and water supply services
A flush mounted electricity connection box type 'Drimmelen' for any type of pontoon deck fitting. The connection box replaces the cut away in the decking material. The lock is fitted in an angled cover to avoid dust and dirt to get in. Optional numberplate and lock. The outgoing cable is guided via a sloping plate. |
|
Harbour-In Connection boxes for electrical supply service
A flush mounted electricity connection box type ‘Drimmelen’ for any type of pontoon deck fitting. The connection box replaces the cut away in the decking material.
Electricity:
- Harbour-In box: 1x CEE /16A/230V
- Harbour-In box: 1x CEE /32A/230V |
|
| Long tube with twist lock valve. This tube allows for easy filling of the air bag even while under sail. Polyurethane coated nylon. Color blue, red, gray, white or yellow. 48L. |
|
| Heavy duty polyurethane coated nylon buoyancy bag. According to IOD'95 rules. Bags made of polyurethane coated nylon are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon. Some bags are available with a twist lock tube valve.This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. Optiparts buoyancy bag. Normal valve, Color yellow size inflated 29 cm x 92 cm, content : 48L size deflated 44 cm x 98 cm, radius 5 cm |
|
BUOYANCY BAGS
Buoyancy bags belong to basic if not compulsory boat equipment. Their prevent the loss of a boat by sinking and its damage when navigating through the river basin with removed cockpit cover. Their production is paid a high attention.
|
|
| ... products without information |
| |
PolyPlanar Overhead / Under Dash Stereo Housing- RM-10
The new Poly Planar RM-10 Radio Mount is designed to accommodate today’s larger front panel format Marine radios as well as older DIN style and Post mount. Made from heavy wall ABS plastic, the RM-10 has room for all the accessory cables found on the newest radios. Accepts Poly Planar, Sony, Jensen, Marine AV and even Clarion CMD4!
This rugged enclosure is designed for under dash or overhead mounting. The RM-10 comes with mounting screws and self adhesive gasket tape.
Features:
• UV stabilized ABS housing
• Fits DIN and Post-mount Stereos
• Can be installed overhead or
under dash
• Mounting hardware included
• Accepts PolyPlanar and most other brands of stereos.
|
|
| Protect your stereo from the harsh marine environment. These gasketed covers are designed to keep moisture away from your stereo. Both the WC400 enclosure and the WC3 panel mount accommodate dual post, removable and DIN-style stereos. |
|
| ... products without information |
| |
| All NAIAD thruster control packages feature a main electronic enclosure for simple installation. The thruster system can be easily fitted with numerous control locations for convenient thruster operation. For both hydraulic and AC electric systems, the control package can be supplied with our fully variable (Proportional) feature which provides total thrust control by permitting the output of the thruster to be throttled using our joystick by the operator. The heart of the proportional control is a PLC, which is programmed to suit the application and is often configured to encompass many ancillary hydraulic shipboard systems. |
|
Side-Power Round Touchpanel Thruster Control, Chrome Bezel, 12/24V, 5-wire, 2" cutout.
Side-Power has introduced, for 2005, two new round control panels. These single control panels are designed to better complement today's helms and utilize an attractive chrome bezel ring that covers the four mounting screws. They are easy to install with a 2" hole saw and seal with a large o-ring. |
|
| ... products without information |
| |
| The Strida travel bag , strong , and design only for strida the price 59€ http://www.strida.fr/8.html |
|
| ... products without information |
| |
| Basic sail/spar bag to carry your equipment. Holds your sail when rolled around the boom. 2 m long. Red nylon material keeps your sails clean and your spars protected. |
|
| Sailbag. Long bag of red nylon cloth to protect your sail when rolled around the boom. 2 m long. |
|
| ... products without information |
| |
| ... products without information |
| |
| ... products without information |
| |
|
|
see the results for the following category