|
|
| ... products without information |
| |
|
|
|
|
|
A quick, positive, visual indication of rudder angle can be very important when docking or maneuvering a boat in tight quarters. It can save not only your gel coat but your pride. The SI-TEX SRA-1 Rudder Angle Indicator gives you a precise look at exactly where your rudder is positioned.
An easy-to-read 3-1/8" diameter analog faceplate displays, in high resolution, the rudder position from zero through fifty degrees to either port or starboard. High visibility white characters and scale registrations, along with red and green directional markings stand out from a black background. Where many other analog rudder angle indicators have a pointer at the twelve o'clock position on the dial, the SRA-1's zero position is at six o'clock. This configuration has the advantage of being more intuitive. The indicator moves in exactly the same way as the rudder relative to the boat.
The SRA-1 is designed for use with the SI-TEX SP-70 and SP-80 Autopilots, as well as others equipped with a rudder feedback transducer and an output connector for a rudder angle indicator. It will fit a standard 3-3/8" circular instrument cutout in a dash, or it can be mounted in an optional watertight ABS plastic case. Up to five SRA-1 units can be connected to a single SI-TEX autopilot.
|
|
| ... products without information |
| |
|
A Marine Travelift self-propelled transporter can maximize profitability and boat handling efficiency by allowing boatyards to store boats in closer proximity, and thus virtually doubling the available yard capacity. A remote controlled transporter is designed to work in tandem with a Marine Travelift boat hoist to best utilize time and manpower, but more importantly, increase a boatyard’s revenue substantially.
|
|
|
|
|
|
|
The Hydrotrans RM-series is a 4 wheel steering, self powered and radio remote controlled transporter. This series of transporters will transport boats or other material on four-point cradles. The engine and hydraulic pumps can be placed at the side or the front of the transporter. The wheels are driven by hydraulic motors. The energy source and steering controls are all carefully and safely hidden in the motor compartment, this compartment is also isolated to reduce noise.
Built with High Grade S355 Steel, the RM-series is available from 20 tons and up.
Hydrotrans has been engineering and building boat and material handling equipment since 1996. A wide range of custom designs can also be provided to suit individual requirements.
All Hydrotrans equipment are built according to CE-regulations and tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Lease to purchase options are available.
Contact us for additional information or a free quotation.
|
|
The HyDrive Admiral series offers a full range of hydraulic steering kits for smaller powerboats from 5 - 10m with either outboards, inboards, stern drives or jet drives.
Each standard kit comes in a single carton with the following items:
*Admiral Series model 101 Helm
*3 litres HyDrive Ultra-15 fluid (Sportkit includes 2ltrs)
*15m (50ft) high pressure 3/4" od hydraulic tubing
(except MercKit & VolvoKit)
*Installation instructions
*All fittings to suit
*Bleeder kit
*Cylinder type of your choice
OBKIT1 Cylinder : 210BH "Bullhorn" Cylinder
For full listing of cylinders and kits available, visit www.coursemaster.com/hydrive/admiral_series.htm
|
|
HyDrive's Heavy Duty range of precision-made, hydraulic marine cylinders offer a large range of torque capacities, with strength and serviceability second-to-none. Constructed from the finest grades of bronze, brass and stainless steel, they are prefectly suited to the harsh marine environment and the punishment of heavy commercial use.
Built with safety margins far in excess of requirements, these cylinders meet all the stringent requirements of both CE and International Survey authorities. The ultra-precision of these units also allow for their use on heavy catamaran installations with fluid-link circuits.
Field replacement glands seals make maintenance possible without removal from their position. Fully articulated, the cylinders are supplied with matching rod-end bolts as well as a powerful ball-type mounting bracket.
|
|
HyDrive manufactures power-steering systems to suit boats of all types and sizes ranging from smaller powerboats to vessels which have rudder torques of up to 10 tonne/metre:
*12VDC power steering units for small boats - which replace the manual helm unit in any of the Admiral series kits. A full-tilting power steering unit is also available (Powerkit-12)
*Custom-made systems for larger vessels 15m and over.
Power steering systems available:
*12V, 24V, 240V & 415V and engine driven pumps
For a full listing of available power steering units, please visit www.hydrive.com.au
|
|
|
|
