|
|
| alsaMarine panels have been tested in the Laboratories of Technique du Bois in France, and it is worth noting that the resistance to deflection, or elasticity, is comparable to Okoume plywood, and even greater in the transverse direction. In addition, despite the low density, hardness is equal to about 50% compared to plywood BalsaMarine Panels, with an end grain balsa core, have been developed to provide the user with a strong, lightweight structural panel. Our Composite Panels are 4' x 8' in size and can be produced in-house with a variety of decorative veneers: Teak, Cherry, Afromosia, Maple, Teak & Holly etc. |
|
Light weights for heavy tasks.
The latest challenges for today's designers: Not only thinner and lighter, but also thicker and lighter - for elements, furniture-making and also in the interior fittings sector. Moralt Lightwood Boards are the perfect solution whenever weight plays a role in furniture design. However, these Moralt boards are not one-trick ponies: they offer excellent loading capacity strength, stability and a smooth working surface.
New in our program: The Balsaboard Lightwood.
The core of this board consists of an end grain Balsa-core, guaranteeing a high compressive strength and at the same time a very low weight. The perfect base for contemporary products, including for example the Moralt Sandwich construction products with lamincores.
- end grain core made of Balsa (Ochroma Lagopus)
- a high vertical pressure resistance on the board`s surface
- available with thin MDF-Face or cross grain veneers |
|
Up and coming decorative surfaces
The decorative Moralt boards combine long-term resilience with natural beauty. High stability with creative designs. Smooth surfaces with modern aesthetics.
Multifuntional Panel Deco:
- with chipboard or MDF-Face
- available in product and product combination
- colour-match decors
- contemporary surface structures |
|
A light core and a good looking product! The new designing trend in the furniture-making and interior fittings industries.This panel is thick and stable yet light in weight, whilst
also being made of solid timber.
The end grain core made of Balsa provides the low weight at high
compressive strength. The Spruce lamincore on either side provides good resistance to screw pull-out as well as high lengthwise stability |
|
| Proven construction with technical perfection. The blockcore: 30 mm thick solid wood battens that are each glued together. Solid wood finished with various appropriate faces for the most diverse applications. The Classics with excellent processing properties and a favourable price. |
|
Wood at its prettiest.
Functional - yet naturally beautiful.
That is pure wood, wood of the highest quality.
The Beauties of Moralt: these are carefully selected fine sliced veneers. Complete veneer leafs bookmatched into a symmetrical picture on one board . In A-front quality on each and every single panel. The thickness of the veneers is generously measured so that there is sufficient material from which to sand. |
|
The Solid Choice: Offering stability in a variety of areas.
The Laminboard core has stood the test of time and is still considered the ideal basis for many internal fit-out functions.
Choose a face material - Gaboon / similar, thin chipboard or thin MDF, Exterior grade MDF, long- or cross-grain veneers
By the way, we can also offer a cross- or long-grain veneer with an aluminium moisture barrier. |
|
An impressive product: the board has been created to suit considerable load-bearing applications. Furthermore it is a board with an extremely smooth surface, brought about by the exclusive Moralt 5 mm lamincore vertical annual growth rings, offset against each other and glued in a dovetail construction. .
New: the cross grain Blockboard core. With this extra ingredient, an already very stable material becomes even stronger. With the 3-ply cross core, the board is not only easier to edge, but also can be processed in either direction. |
|
The noise excluder: for peace and quiet
A special noise-reducing core in this Sandwich element provides this board with outstanding acoustic properties.
Choose a face material of either an Exterior grade MDF or a long-grain face veneer.
By the way, we can also offer a long- or cross-grain veneer with an aluminium moisture barrier. |
|
The Climate preserver: Keeps the heat and the cold outside.
The inner core of the Thermo Laminboard consists of Polyurethane (PU) foam, a material with excellent thermal insulation properties.
Choose a face material of either an Exterior grade MDF, or a cross- or long-grain veneer.
By the way, we can also offer a long- or cross-grain veneer with an aluminium moisture barrier. |
|
Working with the nature and not against it!
For all our customers who want more than the legal guidelines, we offer something special:
- Cores and Faces made of regional timbers
- Block and Laminboards made of spruce / fir
- Covered with poplar
Contact with comestibles:
We confirm the innocuousness of these panels in the contact with foodstuffs.
Eco-label "Blue Angel" (Blauer Engel):
We confirm the special environmental friendliness of these panels, certified by the German environmental label "Blauer Engel". |
|
BalsaMarine panels have been tested in the Laboratories of Technique du Bois in France, and it is worth noting that the resistance to deflection, or elasticity, is comparable to Okoume plywood, and even greater in the transverse direction. In addition, despite the low density, hardness is equal to about 50% compared to plywood BalsaMarine Panels, with an end grain balsa core, have been developed to provide the user with a strong, lightweight structural panel. Our Composite Panels are 4' x 8' in size and can be produced in-house with a variety of decorative veneers: Teak, Cherry, Afromosia, Maple, Teak & Holly etc.
Our panels can be made with foam, balsa or honeycomb cores. |
|
| These panels are available with honeycomb, foam, balsa or aluminum core and can be laminated with FRP (Fiberglass Reinforced Plastic), HPL (High Pressure Laminates), marine plywood and/or decorative wood veneers. |
|
BalsaMarine panels have been tested in the Laboratories of Technique du Bois in France, and it is worth noting that the resistance to deflection, or elasticity, is comparable to Okoume plywood, and even greater in the transverse direction. In addition, despite the low density, hardness is equal to about 50% compared to plywood BalsaMarine Panels, with an end grain balsa core, have been developed to provide the user with a strong, lightweight structural panel. Our Composite Panels are 4' x 8' in size and can be produced in-house with a variety of decorative veneers: Teak, Cherry, Afromosia, Maple, Teak & Holly etc.
Our panels lso can be made with honeycomb or closed cell pvc cores. |
|
| Honeycomb panels provide excellent structural performance and are extremely lightweight. Honeycomb can be produced in your option of nomex, plastic and carbon and aluminum. These panels are also available in 1/8—5” (3-130mm) x 4’ x 8’ (2440 x 1220mm) up to 5’ x 10’ (3050 x 1530mm). These panels are also available laminated with FRP (Fiberglass Reinforced Plastic), HPL (High Pressure Laminates), marine plywood and/or decorative wood veneers increasing the mechanical properties of the core by stabilizing the cell walls and increasing thermal and acoustic insulation properties. The size and thickness are controlled to excellent tolerances. |
|
| BalsaMarine panels have been tested in the Laboratories of Technique du Bois in France, and it is worth noting that the resistance to deflection, or elasticity, is comparable to Okoume plywood, and even greater in the transverse direction. In addition, despite the low density, hardness is equal to about 50% compared to plywood BalsaMarine Panels, with an end grain balsa core, have been developed to provide the user with a strong, lightweight structural panel. Our Composite Panels are 4' x 8' in size and can be produced in-house with a variety of decorative veneers: Teak, Cherry, Afromosia, Maple, Teak & Holly etc. |
|
| PVC foam is a closed, inert gas filled, cellular structure. It is produced in a range of densities and thicknesses to meet required specifications. It is available as plain sheet, perforated or scored, as contour-able, scored, or scrim backed, and as custom planks. It is also available These panels are also available in 1/8—5” (3-130mm) x 4’ x 8’ (2440 x 1220mm) up to 5’ x 10’ (3050 x 1530mm). These panels are also available laminated with FRP (Fiberglass Reinforced Plastic), HPL (High Pressure Laminates), marine plywood and/or decorative wood veneers. |
|
| PVC foam is a closed, inert gas filled, cellular structure. It is produced in a range of densities and thicknesses to meet required specifications. It is available as plain sheet, perforated or scored, as contour-able, scored, or scrim backed, and as custom planks. It is also available These panels are also available in 1/8—5” (3-130mm) x 4’ x 8’ (2440 x 1220mm) up to 5’ x 10’ (3050 x 1530mm). These panels are also available laminated with FRP (Fiberglass Reinforced Plastic), HPL (High Pressure Laminates), marine plywood and/or decorative wood veneers. |
|
| Honeycomb panels provide excellent structural performance and are extremely lightweight. Honeycomb can be produced in your option of nomex, plastic and carbon and aluminum. These panels are also available in 1/8—5” (3-130mm) x 4’ x 8’ (2440 x 1220mm) up to 5’ x 10’ (3050 x 1530mm). These panels are also available laminated with FRP (Fiberglass Reinforced Plastic), HPL (High Pressure Laminates), marine plywood and/or decorative wood veneers increasing the mechanical properties of the core by stabilizing the cell walls and increasing thermal and acoustic insulation properties. The size and thickness are controlled to excellent tolerances. |
|
| Honeycomb panels provide excellent structural performance and are extremely lightweight. Honeycomb can be produced in your option of nomex, plastic and carbon and aluminum. These panels are also available in 1/8—5” (3-130mm) x 4’ x 8’ (2440 x 1220mm) up to 5’ x 10’ (3050 x 1530mm). These panels are also available laminated with FRP (Fiberglass Reinforced Plastic), HPL (High Pressure Laminates), marine plywood and/or decorative wood veneers increasing the mechanical properties of the core by stabilizing the cell walls and increasing thermal and acoustic insulation properties. The size and thickness are controlled to excellent tolerances. |
|
| ... products without information |
| |
|
|
