|
|
Sizes: 100mm
Weight: 381g
Voltage: 12v/ 24v or 130v/ 230v
Wattage: 5w/ 10w/ 20w or 25w/ 40w or LED
Lamp Type: G4 or G9 or LED
IP Rating: 66 as Standard with all Exterior Lights
Lenses:
Sandblasted
Dichroic Coloured Mirror
Clear
Additional information:
Light Outputs
|
|
SCOUT OF BOOM 4 LED 1w WARM WHITE, VARI, (angle 120°), 7 m cable 85,00 EUR (557,56 FF)
Scout to be fixed on the boom, the bimini...
to light the COKPIT or the kitchen, the bathroom...
100% waterproof
Can be embedded in the lower track of the Boom, "flush"
4 led 1 hot Watt ultralumineuses bland
equivalent with a spotlight of 30-35 W traditional
consumption 6 W
food VARIVOLT 10 to 30 volt
7 m of cable and tight catch m/l
Dimensions:
Width: 29,40 mm
Width left to embed: 15,95 mm
Length: 235 mm
Height: 11 mm
Reference: 04BOOM 4 VARI
|
|
SCOUT OF HULL 6 LED 1w RED, VARI (angle 60°)
As an indication, a traditional halogenous bulb of 50-55 W replaces
6 LED of power
Scout of Hull with integrated driver
Detailed description:
Diameter: 90 mm
Thickness: 10 mm
Tension: 10 to 30 V AC OR cd. (system of regulation integrated)
Consumption: 6 W
Lighting: RED
Reference: 04HULL 6VARI RED
|
|
Scottlamp Waterproof LED Utility Light
Ideal Lighting for Camping Trips and working in the wet
The waterproof LED inspection lamp is ideal for wet environments.
This is a waterproof LED light providing a bright light with low power consumption. Designed to work in wet conditions, the Scottlamp LED Utility Light (SLUL) is ideal for a variety of commercial and leisure applications.
The SLUL is a waterproof, robust and powerful, low voltage, bright light incorporating the latest multichip white LEDs (Light Emitting Diodes). While only drawing 0.2 amp, means the SLUL is ideally powered from car or boat batteries. The SLUL is an ideal emergency back up inspection light. It uses little power and will last a lot longer than conventional lights: essential when power is at a premium for more vital applications.
|
|
Waterproof LED flush mount, surface mount, and bulkhead LED light.
Advantages include:
- Waterproof to IPX7
- Robust and non-corrosion design
- Optional lens colours including red and green
- Low profile
- Low power consumption (0.2 amps)
- Bright white wide angle LEDs
- Surface, bulkhead or flush mounted
- Flying tails
Applications including: commercial and leisure marine, vehicles, navigation lighting, kitchen cupboard lighting, and remote/independent power source systems.
|
|
SCOUT OF CHECHMATE 6 BLACK LED 1w WHITE, VARI (angle 60°) 95,00 EUR (623,16 FF)
As an indication, a traditional halogenous bulb of 50-55 W replaces
6 LED of power
Scout of Black CHECHMATE with integrated driver
Detailed description:
Diameter: 90 mm
Thickness: 18 mm
Tension: 10 to 30 V AC OR cd. (system of regulation integrated)
Consumption: 8 W
Lighting: White
Reference: 04MAT 6 VARI BLK
|
|
Waterproof Flexible Led Stripes 12V
PVC Flexible Led Stripes, for external use, hight power, low consumption,
Slim Shape, you can even walk on it, available in Red, Yellow, Blue, Green, Orange, White, Warm White or RGB
Featured Waterproof IP65 or IP68
|
|
|
Popular with firefighters and adventure seekers. The unique easy slide thumb switch on the StealthLite 2400 is easy to operate, even with gloves. The tough resin body is corrosion proof and resistant to extreme temperatures. The Xenon lamp is powered by 4 AA alkaline cells (included) for a bright beam that penetrates thick smoke, fog, and dust. Attach the StealthLite to one of our optional helmet light holder clips and you have a hands-free light for work or play. Certified to ATEX Zone 2 (Category 3). Submersible to 150 meters.
|
|
Unlike other torches in the market that have a yellowish beam, the MityLite 1900 uses a hi-intensity Xenon lamp that produces a powerful, bright beam. Use this compact torch to cut through thick smoke, fog, and dust. It is submersible to 150 meters and comes with a twist on/off lens shroud. The 1900 is ideal for any situation. Powered by 2 AAA alkaline cells. Certified to ATEX safe for use in hazardous Zone 1 (Category 2) locations.
|
|
This one is built to last. The unbreakable ABS body resists chemicals, water and corrosion. The polycarbonate lens and focused Xenon lamp module produce a tight white beam that penetrates smoke and fog. The PeliLite 1800 is submersible to 150 meters, thanks to the o-ring seal and twist on/off lens shroud that eliminates leaky switches. It is powered by 2 C akaline cells. Certified to ATEX Zone 2 (Category 3).
|
|
|
This powerful torch was designed with one big goal: SAFETY. The SabreLite 2000 carries more approvals than any other torch on the market today making it extremely safe. The SabreLite is o-ring sealed with a twist on/off lens shroud and comes with a polarity battery guard tray that safeguards against dangerous "outgassing" of hydrogen from an accidentally reversed cell. It is powered by 3 C alkaline cells, submersible, and has an ABS resin body which resists chemicals, corrosion, and extreme temperatures. Unlike ordinary torches with yellowish beams, the SabreLite's incredibly bright Xenon lamp produces a powerful collimated white beam of light. Peli's SabreLite is the leader in quality and performance. Certified to ATEX Zone 2 (Category 3).
|
|
4 LEDs of the latest generation and 8 hours
of autonomy with a brilliant white, penetrating light.
The Lumen Led uses 4 LEDs of the last generation, low energy consumption LEDs with high lighting efficiency.
The LEDs are super powered for a colour temperature of over 6.000°K, and have a working life of around 50.000 hours.
It is fitted with an electronic circuit that ensures the best power supply and protects the LEDs.
The power supply is provided by 6 C size, torch batteries providing more than 8 hours autonomy.
The underwater light has a power that is comparable with more than 50 Watts.
The metal lighting head, with its 4 LEDs and electronic circuit, is completely watertight and provides added protection against accidental
water infiltration.
|
|
|
Compact and light, very resistant torch and completely seals even in great depth. Indeed, the double O ring on the front of the porthole and the magnetic switch eliminate all the possibilities from water infiltrations even after several years of use. - Food by 3 piles half torch of 1.5 volts (type C) - Bulb with iodine of 3.8 volts - screwed Porthole with fast opening, equipped with a double O ring - Parabola with facets for a homogeneous pencil of light - magnetic Switch
|
|
| ... products without information |
| |
We stock video illuminations of different manufacturers. The accumulator tanks of the lights simply can be put together with corresponding mounts on the underside of the housings. Like this it is also possible to mount available lights at the housings.
The head lights of video illumination are mounted with ball-and-socket joint arms directly on the grips of the video housing. The light direction can freely be chosen and shade in the picture can be avoided.
Please gather the technical data of the different video illuminations from the following tables. All lamp systems contain the ball-and-socket joint arms as well as the assembly mount.
|
|
|
|
