|
|
| ... products without information |
| |
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
| Reduce cycling pulsation and pressure spikes, increase the life of your pump — and even save battery power. SHURflo accumulator tanks are NSF certified. Easily handles pressure requirements from 20 psi [1.4 BAR] to 125 psi [8.8 BAR]. |
|
• Integrated pump and tank system
• May be mounted vertically or horizontally
• Flow rates up to 4.5 US Gallons/min (17 Lires/min)
|
|
| The most advanced system available, this fully-automatic, quiet unit pumps tasteless, odorless water smoothly and consistently. Self-priming, corrosion-resistant and NSF certified tank. The result is longer life, reduced cycling, smooth flow and less wear on the pump. As always, the pump can run dry without damage. |
|
| This new medium demand unit from Johnson Pump consists of an Aqua Jet WPS five-chamber diaphragm pump integrated with a pre-pressurised 2 liters accumulator tank and inline strainer. The unit's design allows for either vertical or horizontal installation. |
|
Two self-priming pumps pressure boosting plant. Noiseless running, suitable for the distribution of the pressure water. Membrane tank made of inox.
Separated motorpump groups; two adjustable differential pressure switches. Pump casings made of bronze; special brass alloy made impeller, axis AISI 316, carbon ceramic mechanical seal. |
|
| The Rhine current drinking water plant RH 028 is suitable for occupation ships and large yacht ones. Equipped with a calmly running, sucking in, single-step centrifugal pump. It produces a pressure up to 3 bar. The pump made of brass and high-grade steel is manufactured. The plant consists 22 of an l high-grade steel pressure vessel, pump with adjustable push button switch and Verbindungsschlauch with check valve. The pump can be dismantled by the tank and set up separately. On request the plant is available also with second and third compression phase, so that a pressure up to 5 bar can be achieved. |
|
| ... products without information |
| |
| ... products without information |
| |
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
| A balanced and safe air package is a prerequisite to be able to move smoothly in the water. The smaller the tanks are, the less you feel them in the water. Poseidon's tanks have a working pressure of 300 bar, in other words more air in smaller tanks. Our tanks are made from an anodised and baked enamelled special steel that gives a very reliable protection against corrosion. |
|
DIVE THE DISCOVERY
The diving is simple. Open the tank valves, wet the switch on the back of the display, wait for the systems check and off you go. Forget about everything you ever heard about PO2, scrubber life and oxygen cells. Our system will handle all that. Just remember to breathe. You will inhale warm and humid air with a gas mixture optimized for the depth you are at. You will stay warm longer, you will dehydrate less and your body will experience less decompression stress. |
|
3,5 M3
œ Made from quality brass meeting the very strict requirements of the French Standard NFA 51105 (very low impurity level).
œ Protected by multi-coat plating with a chrome finish.
œ Can be used up to 230 bars WP. |
|
| Tank, 15l / 3300 PSI (230 bars) giving the capacity of a twin tank. This tank is equiped with the new dual outlet valve (Din or INT) without reserve and a carrying handle. |
|
Valves: Single and twin valve type in chrome plated matt finish brass, with DIN-INT connection, lead of thread M 25 x 2
External treatment: shotblasting with selected grit, 1 protecting zinc layer, 90 micron thick, 5 layers of double-component epoxy primer, 3 layers of polyurethane finishing painting with “wet on wet” system, black-white sectors complying with EC regulations |
|
| For 50 years now divers around the world have counted on Sherwood equipment for dependable performance in all conditions, and this trust is something we'll keep earning, dive after dive, for the next 50 years and beyond. Today, the Sherwood brand has expanded into a full line of dive equipment and products, each continuing the long tradition of utter simplicity and absolute reliability. |
|
Valve CE approved.
TECHNISUB cylinders are made from high quality chromium molybdenum steel, with outside and inside protective coating. External protection against corrosion is obtained by hot zinc-painting depositing a layer of molten zinc on the bottles and applying polymer paint. Each cylinder is supplied with high resistance protective nylon mesh. Single 12.5, 15, 18 litres cylinders are equipped with two outlet valves, the second of which swivels. Both outlets can easily be transformed from Int to DIN connection. Handwheels have spare o-ring inside.
High visibility colours.
|
|
| The Cressi bottles are built by Faber, the largest producer European of dive tanks, with standards of very high quality. They exist in 5 different volumes: 5,10,12,15 and 18 liters. The valves and fittings are carried out by Cressi-sub. It was the first easily flexible valves and fittings which appeared on the market. Robust and reliable, it is built with materials of very high-quality. At the time of its design, the passages of air were especially studied so as to guarantee maximum services even and more particularly for the regulators having the highest performances. The drawing of the steering wheels ensures a good catch and facilitates the closing and the opening of the bottle. A new and exclusive system of window in the steering wheel makes it possible to check by a simple glance if the tap is in open or closed position. (yellow = closed tap, red = open tap) In the exit of air an insert threaded which makes it possible to use a regulator DIN indifferently or with clamp is built-in. The flexible side of the valves and fittings makes it possible to pass easily from simple to a double exit and vice versa. The Cressi-sub valves and fittings underwent brilliantly the rigorous tests imposed by the European standards and can thus praise prestigious certification EC. |
|
To check the pressure in the cylinder
œ Supplied with a screw purge
œ Available with yoke or DIN 300 Bar or M26 x 2 ISO 230 bar (Nitrox/O2) connections. |
|
| ... products without information |
| |
Waterproof Barrels 6 L, 15 L and 24 L PEHD quality food, lid to be screwed.
- 6 L: opening = 12,5 cm; diam.= 19,5 cm; H = 25.5 cm; P = 340 gr.
- 15 L: opening = 20 cm; diam. = 30,5 cm; H = 33 cm; P = 1120 gr.
- 24 L: opening = 20 cm; diam. = 30,5 cm; H = 44 cm; P = 1420 gr. |
|
| ... products without information |
| |
PSR has been formulated to rid your potable fresh water system of odors & discoloration by attacking the source. Scale builds on low lying, flat sections of your system, allowing bacteria to form. PSR targets these areas and brings new life to your system. Use PSR to remove hard water stains, lime scale, rust, or any other mineral based scales deposits.
If you have ever seen what contaminated fresh water looks like than you can appreciate what PSR can do. Originally designed to cure problems within municipal drinking water system, PSR has been specially formulated to meet strict NSF requirements. All of our descalers are built on our proven formula which provides a safe, non-toxic & biodegradable solution. PSR takes it one step further by only using food grade rated materials. This gives you piece of mind knowing that your system will remain safe for drinking. |
|
| All natural, non-toxic, biodegradable, environmentally friendly, safe for humans,animals, marine and plant life. Eight single easy to store packs. Patented formula. Contains no formaldehyde or enzmes. Each single pack treats a 20-gallon tank. |
|
|
|
see the results for the following category
