|
|
|
The water of flexible tanks VETUS remains absolutely without taste nor odor. These tanks can be installed quickly and easily; they conform to the place which is allotted to them even if this one is not very accessible. If the installation does not require fixing, it only
|
|
|
|
|
|
|
|
TRIONIC offers an extensive line of Marine and RV water and holding tanks to meet most size and durability requirements. All tanks are rotationally molded of a seamless one piece, non-corrosive linear polyethylene that meets FDA acceptance and complies with Coast Guard regulations. Each water tank has one 1/2" supply opening, one 1-1/2" fill opening and one 1/2" vent. Each holding tank has one 1/2" vent and has two 1-1/2" openings. Openings on all tanks are female National Pipe Threads (NPT) and are located on one end of the tank. We offer custom fitting locations and an optional 3" cleanout or inspection port. All of our tanks are guaranteed to be extremely durable and will not collapse when emptied with high capacity pumps. All tanks can be special ordered with 3/8" wall thickness. If you do not see the tank dimensions that you need on our website, please call to see if we have a tank to suit your needs. We have many sizes that are not listed here. Custom fitting locations are available upon request.
|
|
RIGID TANKS HAS DRINKING WATER
Recently, VETUS developed a series of tanks for drinking water. The materials used are of very high quality and identical to those of fixed tanks VETUS well-known for a long time. The volume of these tanks is respectively of 40,60 and 80 liters. Two straps of fixing are also provided out of standard with each tank. This new range of tanks offers a considerable saving of time! The position of a gauge, included a support SAE with 5 holes to bolt, is already prepared for all these tanks. The only thing to be made is to cut the hole in the medium. The sensor and the indicator must be ordered separately.
The drinking water tanks are provided with a connection for fixed pipe 38 mms in diameter for the filling and a fixed connection 16 mm in diameter for the vent. For the aspiration of water, it is planned a directional plunger pipe with 360°, 13 mm in diameter. These tanks are provided complete with a trapdoor.
|
|
Codice prodotto: HPSA0005, HPSA0004, HPSA0003, HPSA0002
In 2005 a new line of water tanks was added to the product line of SIC Divisione Elettronica.
- The tanks are made in 55, 77, 160 and 207 l main versions but can be customized %u2013 OEM solutions - to fit the customer%u2019s exact specifications.
- The water tanks are made of the alimentary polyethylene required by the ISO norms.
- The tanks withstand high pressures. They were tested under the pressure that by far exceeded resistance requirements.
- The tanks come complete with all the necessary accessories and a new capacitive electronic level sender of the highest quality and measurement precision.
- They are light-weight
- They are certified to comply with all ISO safety standards
- These tanks undoubtedly offer the best value available.
|
|
The Johnson Pump accumulator tank ensures effective and reliable system function. With an accumulator tank incorporated in the system, the intervals between cut-in and cut-out will be longer when only small amounts of water are drawn off. Less wear and tear on the pump with fewer starts and stops.
The Johnson Pump accumulator tank has a pre-pressurised tank, internal rubber bladder to ensure smooth and reliable water pressure. It prolongs pump life and is also easy to fit to new or existing systems.
|
|
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
|
This new high demand unit from SPX Johnson Pump consists of two parallel connected Aqua Jet WPS five-chamber diaphragm pumps integrated with a pre-pressurised 2 liters accumulator tank and inline strainer. The unit's design allows for either vertical or horizontal installation.
|
|
|
This new medium demand unit from SPX Johnson Pump consists of an Aqua Jet WPS five-chamber diaphragm pump integrated with a pre-pressurised 2 liters accumulator tank and inline strainer. The unit's design allows for either vertical or horizontal installation.
|
|
|
Comparable with the traditional water supply, water pressure system VETUS gets a constant water flow in the circuit of the boat. The tank and its membrane under pressure relieve the engine of the pump by saving to him startings with each taking away of water. This ensures a minimum of noise, a constant flow and an energy saving.
|
|
|
Hydrophore units for fresh water systems or sanitation water systems, coated steel or Stainless Steel tanks available.
|
|
• Integrated pump and tank system
• May be mounted vertically or horizontally
• Flow rates up to 4.5 US Gallons/min (17 Lires/min)
|
|
Features:
%u2022 Integrated pump and tank system
%u2022 May be mounted vertically or horizontally
%u2022 Flow rates up to 4.5 US Gallons/min (17 Lires/min)
%u2022
Specifications:
Voltage Options 12,24,32 & 115v
Flow Rate Flow rates up to 4.5 US Gallons/min (17 Lires/min);
Max. Pressure 40psi (2.8bar)
Port Type 1/2" hose barb
Strainer Included
|
|
The navy water act ions are professional solutions, which were developed, over each day in each surrounding field and under all circumstances to be used.
Product properties:
* Heating for the cab and the industrial water
* Four versions:
- Central heating
- Central heating and hot industrial water by a water heater
- Central heating and hot industrial water by an integrated plate-type heat exchanger
- Central heating for the air conditioning system integration
* Five different performance levels: 11.6 KW, 16 KW, 23 KW, 30 KW, 35 KW
* Freeze protection mode by electrical heating element in the header tank
|
|
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
The navy water act ions are professional solutions, which were developed, over each day in each surrounding field and under all circumstances to be used.
Product properties:
* Heating for the cab and the industrial water
* Four versions:
- Central heating
- Central heating and hot industrial water by a water heater
- Central heating and hot industrial water by an integrated plate-type heat exchanger
- Central heating for the air conditioning system integration
* Five different performance levels: 11.6 KW, 16 KW, 23 KW, 30 KW, 35 KW
* Freeze protection mode by electrical heating element in the header tank
|
|
F4B-11 Ultra Ballast 12V & 24V DC
Designed to quickly fill or when reversed, drain a ballast tank at a rate of more than 45 L/min (12 GPM).
Capable of pumping fresh or sea water the pump%u2019s robust design can handle the rigors of continues duty usage, is reversible, and has a built in thermal overload for added protection. Care not to run dry for extended periods of time will increase the pump longevity and ensure reliable performance for many years.
|
|
F4B-11 Ultra Ballast 12V & 24V DC
Designed to quickly fill or when reversed, drain a ballast tank at a rate of more than 45 L/min (12 GPM).
Capable of pumping fresh or sea water the pump%u2019s robust design can handle the rigors of continues duty usage, is reversible, and has a built in thermal overload for added protection. Care not to run dry for extended periods of time will increase the pump longevity and ensure reliable performance for many years.
|
|
|
|
|
|
|
Installed and ready to use in 30 minutes!
Gobius is the first level indicator in the world that measures from the outside. Installing Gobius to your tank is very easy. Instead of the traditional way of installation, i.e taking the tank apart and drilling holes, you simply attach the sensors to the tank on the outside.
All Gobius products measure from the outside
Very easy to install and setup
Suitable for all tank materials; stainless steel/steel, aluminum, plastic and fibre glass
Gobius can be retro-fitted to any shape or size of a tank
Analouge output for gauges from Wema, VDO, Faria, Teleflex, Phillipi…
Supports NMEA 2000
Extremely low electricity consumption, less than 40 mA (12 Volts)
Support 12 – 24 Volts
30 minutes to install
On the sensor there is a disc of tape that is provided to attach the sensor directly onto the surface of your tank. The panel may be placed in the washroom. All necessary cables and plugs needed to connect the sensors and the panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds.
The Gobius technology (patented)
Each sensor that is placed onto the tank wall consists of a shaker and an accelerator. When the shaker creates a vibration in the tank wall, the accelerator measures the size of the vibration and passes the data on to the control unit.
Art No 970459
|
|
UNIVERSAL GAUGE
For drinking water, gasoline, gas oil. Available in 7 dimensions: 280,320,380,480,580,680 or 780 mm length. The sensors 280 and 380 mm are in particular intended to equip rigid tanks VETUS (pages 72,73 and 94,95). Universal gauge VETUS indicates a difference in level every 2.5 cm. It is enough for you to compare with the other systems which have only three positions (full - with half full - vacuum)!
|
|
|
|
|
|
|
SENDER LEVEL WITH ALARM 4-20 MA. SIZE 10 TO 100 CM
Codice prodotto: HP--G00XX4-20
INTERNATIONAL PATENT.
Our new capacitive level sensor provides measurement accuracy, reliability and quality. It was designed to respond to the request of a sensor accurate, durable, universal and easy to use. The following features will reflect the advantages:
- The capacitive level sensor is compatible with all 4-20 mA gauges on the market. It is not compatible with STD (240/33 Ohm) and VDO type (10/280 ohms) gauges.
- It can be connected, properly powered, to the gauge replacing any other existing 4-20 mA sensor, with no special precautions needed.
- It is equipped with an exit alarm that may be audible or visible, and is programmed to 20% (for %u2018empty%u2019 alarm) or 80% (for %u2018full%u2019 alarm).
Capacitive level sensors can be used for FUEL, WATER and WASTE WATERS.
The capacitive sensor is currently produced with lengths ranging from 10cm to 100cm.
The %u2018Reed%u2019 level sensor is universal and therefore can be used for all liquids (white waters, black waters, fuel). The capacitive sensor instead exploits the properties of the liquid the level of which is to be measured and therefore has a structure created on purpose for the liquid of interest. In particular, we produce two types of capacitive level sensors, one concerning the fuel sector and one concerning the white waters and black waters%u2019 sector (for measuring the water level the sensor is then the same but has two different types of alarms %u2013 %u2018empty%u2019 for white waters or %u2018full%u2019 for black waters).
|
|
WATER
available in 12V or 24V D.C.
On the market of deck fitting, one finds a large variety of instruments of control, various kinds and various sizes. Here 3 strong points of the instruments of control VETUS:
- Very high degree of accuracy: with the internal system in suspension and the removable needle, each instrument can be tested and regulated individually.
- Reliability and resistance: annual repairs are rare.
- Ergonomic Lighting: the display is lit by bottom, which offers a better legibility.
- To prevent any effect of condensation in its instruments, VETUS provides a double pane.
- All the instruments presented are provided out of standard with two round frameworks: one out of black synthetic matter and the other chrome one. Height: 10 Misters the largest instruments have a diameter of embedding of 0.100 mm while smallest have a diameter of embedding of 0 52 Misters the total diameter of the largest instruments is 0.114 mm and that of smallest is 0 63 Misters.
|
|
|
|
|
|
|
Installed and ready to use in 30 minutes!
Gobius is the first level indicator in the world that measures from the outside. Installing Gobius to your tank is very easy. Instead of the traditional way of installation, i.e taking the tank apart and drilling holes, you simply attach the sensors to the tank on the outside.
All Gobius products measure from the outside
Very easy to install and setup
Suitable for all tank materials; stainless steel/steel, aluminum, plastic and fibre glass
Gobius can be retro-fitted to any shape or size of a tank
Analouge output for gauges from Wema, VDO, Faria, Teleflex, Phillipi…
Supports NMEA 2000
Extremely low electricity consumption, less than 40 mA (12 Volts)
Support 12 – 24 Volts
30 minutes to install
On the sensor there is a disc of tape that is provided to attach the sensor directly onto the surface of your tank. The panel may be placed in the washroom. All necessary cables and plugs needed to connect the sensors and the panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds.
The Gobius technology (patented)
Each sensor that is placed onto the tank wall consists of a shaker and an accelerator. When the shaker creates a vibration in the tank wall, the accelerator measures the size of the vibration and passes the data on to the control unit.
Art No 970459
|
|
UNIVERSAL GAUGE
For drinking water, gasoline, gas oil. Available in 7 dimensions: 280,320,380,480,580,680 or 780 mm length. The sensors 280 and 380 mm are in particular intended to equip rigid tanks VETUS (pages 72,73 and 94,95). Universal gauge VETUS indicates a difference in level every 2.5 cm. It is enough for you to compare with the other systems which have only three positions (full - with half full - vacuum)!
|
|
|
|
|
|
|
SENDER LEVEL WITH ALARM 4-20 MA. SIZE 10 TO 100 CM
Codice prodotto: HP--G00XX4-20
INTERNATIONAL PATENT.
Our new capacitive level sensor provides measurement accuracy, reliability and quality. It was designed to respond to the request of a sensor accurate, durable, universal and easy to use. The following features will reflect the advantages:
- The capacitive level sensor is compatible with all 4-20 mA gauges on the market. It is not compatible with STD (240/33 Ohm) and VDO type (10/280 ohms) gauges.
- It can be connected, properly powered, to the gauge replacing any other existing 4-20 mA sensor, with no special precautions needed.
- It is equipped with an exit alarm that may be audible or visible, and is programmed to 20% (for %u2018empty%u2019 alarm) or 80% (for %u2018full%u2019 alarm).
Capacitive level sensors can be used for FUEL, WATER and WASTE WATERS.
The capacitive sensor is currently produced with lengths ranging from 10cm to 100cm.
The %u2018Reed%u2019 level sensor is universal and therefore can be used for all liquids (white waters, black waters, fuel). The capacitive sensor instead exploits the properties of the liquid the level of which is to be measured and therefore has a structure created on purpose for the liquid of interest. In particular, we produce two types of capacitive level sensors, one concerning the fuel sector and one concerning the white waters and black waters%u2019 sector (for measuring the water level the sensor is then the same but has two different types of alarms %u2013 %u2018empty%u2019 for white waters or %u2018full%u2019 for black waters).
|
|
WATER
available in 12V or 24V D.C.
On the market of deck fitting, one finds a large variety of instruments of control, various kinds and various sizes. Here 3 strong points of the instruments of control VETUS:
- Very high degree of accuracy: with the internal system in suspension and the removable needle, each instrument can be tested and regulated individually.
- Reliability and resistance: annual repairs are rare.
- Ergonomic Lighting: the display is lit by bottom, which offers a better legibility.
- To prevent any effect of condensation in its instruments, VETUS provides a double pane.
- All the instruments presented are provided out of standard with two round frameworks: one out of black synthetic matter and the other chrome one. Height: 10 Misters the largest instruments have a diameter of embedding of 0.100 mm while smallest have a diameter of embedding of 0 52 Misters the total diameter of the largest instruments is 0.114 mm and that of smallest is 0 63 Misters.
|
|
|
|
see the results for the following category : 
