|
|
Diaphragm Waste Marine pump
The 'straight through' waste path of this super quiet pump easily passes solids in suspension, making it the ideal solution for emptying boat holding tanks. The 360° rotating head offers multiple installation options. 19 lpm (5 US gpm) output and self priming up to 10ft (3m). Capable of extensive dry running. Compact and simple design
|
|
| Constructed of durable ABS plastic. For all fluid reservoirs including differentials, transmissions and gear cases for boats. Dispenses 1 fl. Oz of product with each depression. Designed to fit all Sta-Lube quart, 1/2 gallon and gallon containers. |
|
| Flexible impeller boat pumps make excellent marine bilge pumps, principally because of their ability to handle bilge debris without damage. Because of the robust design many owners still use our 12 Volt dc or 24 Volt dc flexible impeller motor pump units that are up to 25 years old! Flexible Impeller Pumps also give the benefits of good flow, low cost, low size and weight, and are easily serviced and maintained. Most Flexible Impeller pumps must not be run dry, as this will damage the impeller which will require replacing. However, the Utility Puppy 2000 and 3000 both allow maximum of ten minutes dry running after initial prime. As with submersible pumps, flexible impeller pumps can be operated using a float or Hydro Air switch for boat, and remotely controlled from outside the bilge compartment. There is a wide range of flexible impeller pumps to choose from giving a range of flows, discharge heads, and self-priming options for a wide variety of applications such as ballast transfer, bait tank circulation, and deck wash duties |
|
FB-8 series Multipurpose Compact Heavy Duty Bronze Impeller Boat pumps
Compact design, raw water resistant pumps at an attractive price. With excellent self-priming capability, these pumps are ideal for applications like engine for boat cooling, bilge pumping, wash-down, refuelling, emergency and fire fighting.
Also ideally suited for shore for emptying septic boat tanks, flushing, cleaning and filling boat water tanks. |
|
Flow rate: 32 Litres/min (6.5 gallons/min)
Self-priming from dry up to 1.2m (4ft)
- Small bilge debris present no problem to these bronze bodied, flexible impeller boat pumps.
- Simple design means fewer wearing parts.
- ISO 8846 MARINE (Ignition protection).
- ISO 8849 MARINE (Bilge pump for boat standard). |
|
In-Line Boat pumps
Rule has developed a family of compact combination Submersible and Inline pumps and portable pump sailboat kits designed for a wide variety of uses, both onboard and ashore.
|
|
Six strokes pump for boats out one gallon of water. Non-corrosive ABS plastic pump with flexible polyethylene hose. Bottom cap is removable for easy cleaning.
|
|
| The powerful performance of VacuFlush sanitation systems centers on vacuum generator for boat technology. Dometic's continuing development of vacuum generation systems is making VacuFlush a fast-growing name on more boats than ever. Choose from these vacuum-generating technologies. |
|
Aqua Jet WPS 2.9, 3.5, 4.0 & 5.2 and Flowmaster 5.0
The new generation of WPS pumps for boats - 12V or 24V DC. Quiet and pulsation-free even at low speeds, the new Aqua Jet five-chamber diaphragm pump from Johnson Pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats.
NEW! WPS 3.5 Fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise. |
|
Shower and Sink Drain Pump for boat
This single diaphragm pump is ideal for use in shower and sink drain applications. The filter-less design makes maintenance easy and is virtually unblockable. The pump has a compact design with multi positionable ports, which can make installation simple. 960 lph (254 US gph) output, self priming to 3m (10ft) and capable of extensive dry running, offering an inexpensive, reliable solution for shower and sink waste water.
http://www.jabsco.com/products/marine/sink_shower_drain_pumps/shower_drain_pump_50880_series/iid_2095/index.htm |
|
Compact sailboat shower drain, bilge and waste water pump for boats
Specifically designed to pump waste water, the Viking Power 16 is an ultramodern, single-chamber self-priming diaphragm pump that can be set up in several different pump/motor configurations.
Perfect for installation in tight spaces, the Viking Power 16 can be installed anywhere after the drain outlet in the wastewater system or as a boat bilge pump in any leisure craft -- new or used. Compact, robust and adaptable the Viking Power 16 has KlickTite%u2122 XL marine connectors fitted as standard, literally making hose connections a snap! (Delivered with 1" & 3/4" hose and 1/2" BSP (NPT) KlickTite%u2122 XL connectors.)
The Viking Power 16 features non-choke marine valves, which means that no in-line filters for boats are necessary. The pump can not only be run dry, it can also boat handle a mixture of air and water without difficulty. The Viking Power 16 is self-priming up to a height of 3 meters.
With its low pulse and muffled rubber bracket, this pump offers quiet operation. The Viking Power 16 has been built to last, and engineered for easy maintenance. When it comes time to replace the premium grade reinforced nitrile rubber diaphragm, you can put in a spare without even removing the pump from the system.
|
|
Engine for boats Cooling Boat pumps
Flexible impeller pumps are self-priming and therefore, are ideal for engine cooling, wash-down, circulation, and many general purpose on-board or dockside applications. The bronze bodies and stainless steel shafts are well situated for marine environments. They can operate in either rotational direction.
|
|
Water Pressure Marine pump
The new 2.9 and 1.9 models offer attractively priced solutions for craft with up to 3 hot and cold outlets, such as galley sink, hand basin and shower. The self priming, dry running, three chamber diaphragm design has a built-in bypass that gives smooth pulsation free flow, even at lower outputs, making an accumulator tank inessential. The quiet running motor is protected by a thermal overload cut-out, just like our more expensive models, and, of course, quick connect fittings are included.
|
|
Flow rate: 13.7-16.3 Litres/min (3.7-4.5 gallons/min)
Self-priming from dry up to 2.4m (7.8ft)
- Variable Speed Control
- Solid State Pressure Sensor
- Nearly Silent Operation / No Cycling
- Operates on 12V DC or 24V DC
- Controls Pressure by Changing Motor Speed
- Speeds Up As Demand Increases
- Self-priming / Runs Dry
- No Accumulator Tank for boat Needed
- CSA Listed / EN ISO 8846 Marine / C.E. Certified
- Protected under U.S. Patent #6,607,360
- Includes Inlet Strainer |
|
| The RHEINSTROM Impellerpumpe IP 50 can be used for the promotion of drinking water or waste water. The parts coming with water into contact are made of stainless material. The pump for boats is positioninsensitive. It is sucking in drying. A longer unlubricated operation should be avoided however, since otherwise the Impeller could suffer damage. The pump is available in 12 V and 24V execution. |
|
| The SHURflo ULTRAflo Dual Head Boat pump is designed to give the ultimate in pumping capabilities; smooth high flow, minimal amp draw and easy electrical and boat plumbing connections. Optimal for high flow needs such as dual pump installations on larger boats, high flow washdown and high flow/low pressure continuous duty. |
|
| Sherwood Raw Water Cooling Pumps for boats are specific to the engine for boats marinizer's application. Click on further details to identify your pump and gather replacement pump, impeller, minor kit , and major kit information as well as operation instruction manuals and available pump prints. |
|
| Sherwood Raw Water Cooling Pumps for boats are specific to the engine for boat marinizer's application. Click on further details to identify your pump and gather replacement pump, impeller, minor kit for boats , and major kit information as well as operation instruction manuals and available pump prints. |
|
Impeller removal has been made easier with the patented Sherwood Impeller Puller. Simply thread the puller into the threaded end of select Sherwood impellers and the bolt presses on the shaft, pushing the impeller out of the pump for boats.
Sherwood's Impeller Puller is utilized on five different impeller sizes. Impeller puller 23631 is used on the 17000, 18000, 22000, and 27000 impellers. Impeller puller 24412 is used on the 27000 impeller. |
|
Self-priming diaphragm pump for boat with 12v, 24v or 32v DC electric motor for boat. Flow rates up to 17 litres/min (4.5 US gallons/min), pressure switch control, capable of pressures up to 3.2bar (45psi)
|
|
"WPS600
A compact and efficient water supply pump, ideal for pleasure boats with one or two tapping points. It combines easy installation with a low current consump-tion. The pump can be installed verti-cally as well as horizontally.
WPS800 and WPS1200
Water supply boat pumps for medium sized and large boats where you want to be able to use several taps, such as the shower and washing up, at the same time. WPS1200 is available for both 12V and 24V systems."
|
|
The Mach5 water pressure system from Headhunter represents a next quantum leap in pump technology with many advanced features and improvements over conventional water pressure pumps for boats.
An integrated control system provides instant dry run protection, and allows the pump to be used with or without a pressure accumulator tank for boat. The Mach5 incorporates a state-of-the-art multistage impeller system driven by a super-efficient water-cooled motor to generate up to 20 gallons per minute, instantaneously, on demand, and in virtual silence. An easy to read control panel for boat on top of the pump provides instant visible status information as well as reset capability.
|
|
| Sanimarin Pump for boat: essential to install a shower or a sink, Sanimarin Pump of SFA ensures the recovery of waste water on boat board boat. Its installation can be realized with the choice above or below the sea level thanks to a vertical repression going up to 4 meters and a diameter of repression from 22 to 32 Misters Robuste, it guarantees the raising of waste water of a maximum temperature of 35°C with a medium flow from approximately 50 l/mn. Of a consumption engine for boat of 360 W, Sanimarin Pump offers the possibility of a power supply of 12 V or 24 V. Lastly, a dismountable external non-return valve ensure the good performance of the medical pump. |
|
| Electric self priming shower drain pump for boats suitable for pumping shower water. Membrane type pump with an 1" in- and outlet, big enough to let pass small solids such as soap rests. Maximum suction height is 3 meters; maximum delivery height is 5 meters. Capacity 40 ltr./min. The RM electric shower drain pump can be installed in each desired position. All parts are corrosion resistant. |
|
SHURflo’s new Macerator boat pump is designed specifically for sanitation waste and fish box evacuations. This high-powered pump incorporates our high quality motor with a new seamless shell and splash proof design. Featuring a premium impeller design, including o-ring sealed end boat bells and sealed manual turn key. SHURflo’s unique dual blade and housing construction ensures problem free pumping. Delivering 13 GPM [49 LPM]. Thermally protected. Ignition protection. Available in 12 and 24 Volts.
|
|
Flexi boat pumps have many applications, including:
• Emptying/filling water, oil for boat or diesel.
• Bilge pumping
• Water circulation
The pumps can be combined with a vacuum switch for boat that extends the life of the pump by saving battery for boats capacity and preventing dry running. The pumps are self-priming and give full flow right from the start.
FDC900
Suitable pump for handling water, oil and diesel. Can be used as a boat bilge pump, flushing pump and for water
circulation on board for boat.
FDC2700
Flushing, bilge and water circulation pump which is also highly suitable for handling water, oil and diesel. The mo-tor is rated for continuous operation at up to 1.2 bar (17 PSI) pressure.
|
|
... see all the products in the category
Water pump
|
|
|
