|
|
The Nautic Boilers are the result of Quick's long experience. Since 1998 Quick has been producing water heaters for boats, in its Nautic Boiler BX series.
The B3 project was devised from the need to create a quality line, competitive on all markets. The B3 Boilers are the simplest and safest answer to guarantee hot water on board without any type of problem, also thanks to the quality of the materials and structure. The container is in composite material and the tank is in AISI 316 stainless steel. The B3 Nautic Boilers are produced in versions of 15, 20, 25, 30 and 40 litres and are guaranteed for 3 years. |
|
The Webasto Water Station acts as a central unit for the heating of the vessel’s warm water heating system (such as radiators & fan heat exchangers). Additionally, domestic warm water is heated on demand using a Webasto Calorifier. The switching from central heating to domestic warm water heating is done automatically.
The Webasto Calorifier quickly and efficiently heats the domestic warm water by a separate coil from the engine and a coil from the Webasto water heater circuit. The additional electrical 230 V immersion heater
ensures the provision of domestic warm water at shore connection. |
|
Isotemp Basic has an exlusive look, with its brushed stainless steel cover, but most important is the internal design. The highest capacity is achieved by the engine water heat exchanger as well as the immersion heater placement. They are positioned in the lowest part of the tank where the water is coldest, to really heat all the water in the tank, which grants an outstanding volume of hot water. The water in- and outlets are also designed for a minimal mixing of cold water into thee hot, by the incoming water. The selected materials are all the best; tank, tubes and all materials in contact with the water are made of acid proof stainless steel AISI 316 and welded with protection gas to eliminate any risk of corrosion. Each water heater is individually leakage tested to 16 bar/230 psi, before delivery.
|
|
Isotemp Slim is a range of water heaters, available in three sizes, 15, 20 and 25 litres. Isotemp Slim has an exlusive look and design, with brushed stainless steel cover. The highest capacity is achieved by the engine water heat exchanger, as well as by the immersion heater mounting. They are positioned as low as possible inside the tank to heat the water where it is coldest.
|
|
Indel Marine has intruduced a slim line, box style water heater to its range, which has been designed for easy installation in narrow spaces om board. The Isotemp Slim Square has a 16 litres capacity, quick and effectively heats water up via the boat engine or by the electrical heater element if the boat is connected to shore power. The water is heated to above 70°C which enables water to be heated on board at the correct levels from both hygiene and safety purpose.
It can be installed in a varity of position, making it more vesatile than standard models currently available. As with all Isotemp water heaters, the Isotemp Slim square has been constructed with a robust acid proof stainless steel (AISIS 316) and fitted with special components to protect it from overheating. All electrical installations are fatory made and delivered with a cable and plug.
It also features a safety valve for 5.5 bars with a built-in two-way check valve, which reduces or prevents spill water by expansion. It also has a winter drain function. Thermostat mixing valve can be mounted as an option.
The safety valve is set to 5.5 bar/80 psi on this model |
|
"With a QL water heater you really have a more comfortable life on board. A QL water heater quickly and easily provides enough water at the right temperature for a shower, washing up, shaving etc. The water in a QL water heater is heated by the energy released from the engine cooling system. Use is thus made of the heat that would otherwise go to waste. The water heater also has an immersion heater for connection to on-shore po-wer. An adjustable thermostat cuts off heating at the desired temperature. It has a heater cut-out to prevent boiling.
The water heater is available in 20, 30, 40 and 60 L (5-16 gallons) sizes. The tank is made completely in acid resistant stainless steel, which makes it very suit-able for the marine environment. The 1.5 mm thickness and TIG welded joints make the tank very strong and give in-creased corrosion protection. The design and materials also meet the highest sani-tary requirements.
The QL water heater is easily mounted, vertically or horizontally, with stainless steel brackets. To obtain maximum ef-fect the outlet is uppermost, whether installed vertically or horizontally. As an optional extra, a thermostatic mixer is available which reduces hot water con-sumption and protects against scalding."
|
|
The new range of water heaters is completely stainless steel, their characteristics are superior to those currently on the market.
|
|
The new range of water heaters is completely stainless steel, their characteristics are superior to those currently on the market.
|
|
| The new range of water heaters is completely stainless steel, their characteristics are superior to those currently on the market. The BXS water heater range is distinguished by the square-shape design, making for particularly easy installation. |
|
| The Webasto Water Station acts as a central unit for the heating of the vessel's warm water heating system (such as radiators & fan heat exchangers). Additionally, domestic warm water is heated on demand using a Webasto Calorifier. |
|
| Comfort, hygiene and happiness on board. DIKO Yacht Model Boilers serves you the happiness of plenty of hot water without considering how much energy is consumed. Because all the DIKO Yacht Model Boilers operated on wasted engine cooling water as a heat source and does not cause extra cost. You just feel relaxed when having a warm shower on board on a cool morning. |
|
DSSY-XM Series
This series produce hot water in shipboard.
Water Capacity Range: 125-2000 liters
Power Capacity Range: 10-200 KW
* Efficient: Besides, the inner tank is isolated with polyurethane material to minimize the heat looses and maximize the efficiency.
* Durable: Considering the corrosive effects of the marine environment, all the materials are carefully chosen and manufactured with extra attention. And all the electric equipments and units are chosen and mounted considering the maximum lasting such as enclosured metal cable glands and magnetic contactors rated for 1,500,000 cycles.
* Safe: For the safety of human and device, every detail is examined and all the electrical accessories are chosen according to provide maximum safety. All the outer parts are IP 65 enclosure water. Special lug wrench to renew the heating elements is extended to the standard package. ASME T&P relief valve to guard the potential risk that can be because of extraordinary temperature and pressure rises. As a conclusion considering the human safety and health, leakage control system which shuts down power in an event of probable electric leakage, and 24V AC reduced control voltage which is under the danger limit for human body are added the standard equipments list. |
|
DSSY-XMP
Water capacity: 125-2000 liters
Power capacity: 10-200 KW
Designed for marine environments, equipped for corrosive effects.
* Efficient: Inner tank is isolated with polyurethane material to minimize the heat looses and maximize the efficiency.
* Durable: Inner tank, outer jacket and the electric control panel is electrostatic epoxy powder coated galvanize steel or ASTM 304L stainless steel. All the electric equipments and units are chosen and mounted considering the maximum lasting.
* Safe: High standard, temperature resist international Lloyd certificated relays, fuses and conductors are mounted in control panel units. All the outer parts are IP 65 enclosure water. Special lug wrench to renew the heating elements is extended to the standard package. ASME T&P relief valve to guard the potential risks for over temperature and pressure. 24V AC reduced control voltage which is under the danger limit for human body are added the standard equipments list and completely safe products even under the heaviest conditions are served behind World standards.
|
|
DTSB-XM
Water heater with electrical command panel and with serpentine heat exchanger
It also be operated with electric and engine cooling water.
125-2000 liters
10-200 KW
Serves you plenty of hot water with out using extra energy. Because most of the DIKO Marine Series products uses wasted engine coolants as an energy sources by circulating hot water, steam or oil through the thermal circuit serpentine exchangers immersed in the inner tank. Accordingly, they serves you plenty of clean hot water without using electricity power. Manuel power level control switches enables you to independently operate heating resistances. That provides the heater not to overstrain generator when it is not needed.
All electric equipments and units are chosen and mounted considering the maximum lasting.
High standard, temperature resist international Lloyd certificated relays, fuses and conductors are mounted in control panel units. A cooling fan, temperature resistant fuses and conductors are mounted. All outer parts are IP 65 enclosure. ASME T&P relief valve discharges over temperature and pressure. Leakage control system which shuts down power in an event of probable electric leakage, and 24V AC reduced control voltage. |
|
* Efficient: Serves you plenty of hot water with out using extra energy. Because most of the DIKO Marine Series products uses wasted engine coolants as an energy sources by circulating hot water, steam or oil through the thermal circuit serpentine exchangers immersed in the inner tank. Accordingly, they serves you plenty of clean hot water without using electricity power. Manuel power level control switches enables you to independently operate heating resistances. That provides the heater not to overstrain generator when it is not needed.
* Durable: Inner tank, outer jacket and the electric control panel is electrostatic epoxy powder coated galvanize steel or ASTM 304L stainless steel. So the water heater resist to corrosion even if its jacket or outer parts are scratched or its paint damaged. Additionally thermal circuit serpentines are manufactured from hot rolled ASTM A106 seamless steel tubes. And all the electric equipments and units are chosen and mounted considering the maximum lasting.
* Safe: For the safety of human and device, every detail is examined and all the electrical accessories are chosen according to provide maximum safety. |
|
| These storage water heaters are particularly conceived for the employment on ships and yachts of medium size. Due to the compact dimensions and the small weight they are suitable in particular for sailing boats. By the use of high-quality materials a long life span and a problem-free enterprise are ensured. 5 different models with a volume of 20 stand - 40 liters to the selection. The assembly can take place both horizontally and perpendicularly. The components coming with sea water into contact (boiler, connections, attachment volumes) are made of stainless high-grade steel AISI 316. The heating up the water can be made alternatively by means of the connection of the cooling circuit of the marine engine or by the inserted 800 W heating cartridge. Over in series integrated thermostats the water temperature upto max. 80 can be stopped °C according to desire. |
|
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
|
|
