|
|
The Webasto Water Station acts as a central unit for the heating of the vessel’s warm water heating system (such as radiators & fan heat exchangers). Additionally, domestic warm water is heated on demand using a Webasto Calorifier. The switching from central heating to domestic warm water heating is done automatically.
The Webasto Calorifier quickly and efficiently heats the domestic warm water by a separate coil from the engine and a coil from the Webasto water heater circuit. The additional electrical 230 V immersion heater
ensures the provision of domestic warm water at shore connection.
|
|
|
The BXS water heater range is distinguished by the square-shape design, making for particularly easy installation.
|
|
The compact dimensions and capacity of the 16 litres 316 stainless tank satisfies a large part of the market. The BX16 is easy to install and highly
functional. On request it is available with the heat exchanger only (without electric element).
|
|
- High quality materials
- Heat exchanger with wide exchange surface
- Produces hot water from the electric element, that Is fitted with an adjustable safety thermostat.
- Relief / non-return vale that allows discharging of the water heater in case of disuse
|
|
The Nautic Boilers are the result of Quick's long experience. Since 1998 Quick has been producing water heaters for boats, in its Nautic Boiler BX series.
The B3 project was devised from the need to create a quality line, competitive on all markets. The B3 Boilers are the simplest and safest answer to guarantee hot water on board without any type of problem, also thanks to the quality of the materials and structure. The container is in composite material and the tank is in AISI 316 stainless steel. The B3 Nautic Boilers are produced in versions of 15, 20, 25, 30 and 40 litres and are guaranteed for 3 years.
|
|
This series is equipped with a solid isolation, which guarantees a heat-storage of at least 24 hours. In comparison with other boilers on the market this boiler achieves the best utilization coefficient by using considerable longer heat exchanger. Sizes from 15 l – 115 l.
Special designs can be custom-built if requested, e.g. installation of a second and third heating coil in order to hook up two motors, a generator or electric water heater. Furthermore we are able to install several heating cartridges. It is also possible to install different connections for motor circuit and fresh water (connections for remote control thermometer etc.).
-Approved safety
-Five sizes
-Completely made of CU
-Longer heat exchanger
-Trouble-free installation
-Maintenance-free
-Cost-saving
The above mentioned values refer to a water temperature of 16 ° C and an indoor temperature of 18 ° C. The time needed for heating up the boiler depends on the feeder length and the power (KW) of the engine.
|
|
|
|
|
|
|
"With a QL water heater you really have a more comfortable life on board. A QL water heater quickly and easily provides enough water at the right temperature for a shower, washing up, shaving etc. The water in a QL water heater is heated by the energy released from the engine cooling system. Use is thus made of the heat that would otherwise go to waste. The water heater also has an immersion heater for connection to on-shore po-wer. An adjustable thermostat cuts off heating at the desired temperature. It has a heater cut-out to prevent boiling.
The water heater is available in 20, 30, 40 and 60 L (5-16 gallons) sizes. The tank is made completely in acid resistant stainless steel, which makes it very suit-able for the marine environment. The 1.5 mm thickness and TIG welded joints make the tank very strong and give in-creased corrosion protection. The design and materials also meet the highest sani-tary requirements.
The QL water heater is easily mounted, vertically or horizontally, with stainless steel brackets. To obtain maximum ef-fect the outlet is uppermost, whether installed vertically or horizontally. As an optional extra, a thermostatic mixer is available which reduces hot water con-sumption and protects against scalding."
|
|
Isotemp water heaters are specially designed for the use on yachts and boats. Only high quality components are chosen to ensure the best product performance. The marine water heaters are very robust; both the water tank and external cylinder are made of stainless steel.
- Robust design
- Water tank in stainless steel
- External cylinder in stainless steel
- Stable fixing feet in stainless steel, 360° adjustable fixing for easy and also bulkhead installation.
|
|
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
| ... products without information |
| |
| ... products without information |
| |
| ... products without information |
| |
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
|
|
