|
|
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED. |
|
The HID Thru-Hull SeaLite® is an extremely rugged system with unmatched light output. The fully sealed light head, scratch resistant sapphire port and precision-machined housing ensure that the system will remain reliable, even in the harshest environments. Each version utilizes the same thru-hull fitting and lamp, but offers ballast options to suit various installations and budgets.
The HID-X is the fully outfitted version of the 150W HID that includes automatic thermal and moisture sensors and integrated fault lights. This unit comes standard with a 15-foot interconnect cable and 15-foot power cable.
The HID-S version is very similar to the HID-X except that it does not include the sensors and, therefore, utilizes a smaller housing for the ballast. This unit comes standard with a 15-foot interconnect cable and 15-foot power cable.
The HID-O is our OEM version intended for boat manufacturers that want to incorporate the unit into a boat design. This unit includes the ballast (without splash-proof enclosure box) and a 15-foot interconnect cable (no power cable).
All versions are available in a stainless steel fitting or an optional titanium/stainless steel fitting for superior corrosion resistance in seawater. Thru-Hull SeaLites® - whiter, brighter and more durable. |
|
The most powerful underwater light available is from OceanLED - the NEW 4010 Super Nova lives up to its name.
At twice the power of a 3010, the 4010 Super Nova is a hybride of the ever popular 1" Thru Hull. Utilizing a slightly larger hole cut out at 1 1/2" the 4010 Super Nova offers the largest light output of any underwater light available on the market, and is a landmark in LED technology.
If you want the best and the biggest underwater light - then the 4010 Super Nova is it.
Suitable for Fiberglass, GRP and wooden hulls and also for use on aluminium/steel hulls using the delrin sleeve.
All lights utilize Tritonium Optical lenses, and are supplied with a quick connect system by Deutsch ensuring almost 'fool proof' installation and compliance with ABYC, E11 regulations.
Available with Super White LEDs, Super Blue LEDs and the Super Green LEDs.
Currently under going full Lloyds Type Approval. |
|
The original Thru-Hull with the worlds smallest hole cut-out for a thru hull light at only 1"! This light with a 30mm profile head makes it ideal for Transom mount applications. A very quick to fit and effective underwater light.
Suitable for Fiberglass, GRP and wooden hulls and now also available for use on aluminium/steel hulls using the delrin sleeve.
Lloyds Type Approved, RINA, ABS Type Approved, USCG Ignition Protected and ABYC H-27 Side Load approved.
All lights utilize Tritonium Optical lenses, and are supplied with a quick connect system by Deutsch ensuring almost 'fool proof' installation and compliance with ABYC, E11 regulations.
Available in 1010, 1520, 2010 & 3010 Series with Super White LEDs, Super Blue LEDs and the Super Green LEDs. |
|
The Flush Mount from OceanLED has an exceptionally low profile giving it virtually unlimited Hull Mounting options. This light can be retro-fitted into most existing underwater lighting hole cut outs, offering immediate benefits of no Startup power surge, low heat, minimal maintenance and improved light output.
Suitable for Fiberglass, GRP and wooden hulls and now also for use on aluminium/steel hulls using the delrin sleeve.
Low profile bezel offering almost unlimited mounting possibilities.
Lloyds Type Approved, RINA, ABS Type Approved, USCG Ignition Protected and ABYC H-27 Side Load approved.
All lights utilize Tritonium Optical lenses, and are supplied with a quick connect system by Deutsch ensuring almost 'fool proof' installation and compliance with ABYC, E11 regulations.
Available in 1520, 2010 & 3010 Series with Super White LEDs, Super Blue LEDs and the Super Green LEDs. |
|
The Original.
AQUALUMA Underwater Lighting 3 series was designed with long life in mind. The corrosion proof, injection molded polycarbonate housing that is the signature of all the AQUALUMA range was first created for the 3 series.
Available in a range of 3 colours, Blue, Green or White, all are supplied with sealant, 3.7 metres of cable, carry a two year warranty and if necessary can be serviced from inside the boat.
Make your boating experience all that more illuminating and install an AQUALUMA Underwater Light today. |
|
The UL Ti MATE 75 SA 'Super Adjustable' (patent pending) weldin from Underwater Lights LIMITED ™ for aluminum and steel hulls can be installed in the transom or the hull. The SA reflector unit allows a change in beam direction of up to 20 degrees. This is available with either a 150 or 250 watt metal halide lamp with a 110-230 volt ELECTRONIC ballast, perfect for DC power on a yacht with either and aluminium or steel hull. A 30 and 50 degree angle is also available in both materials.
S00330 - 75 - SA - UL Ti MATE 75 SA 30 Degree Stainless Steel
S00350 - 75 - SA - UL Ti MATE 75 SA 50 Degree Stainless Steel
S00630 - 75 - SA - UL Ti MATE 75 SA 30 Degree 5083 Aluminium
S00650 - 75 - SA - UL Ti MATE 75 SA 50 Degree 5083 Aluminium
|
|
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED |
|
The UL Ti MATE 475 'SA' Super Adjustable (S00475) (patent pending) from Underwater Lights LIMITED ™ houses the new Super Adjustable unit which allows a change in beam direction of up to 20 degrees. This is available with either a 150 or 250 watt metal halide lamp with a 110-230 volt ELECTRONIC ballast, perfect for AC power on GRP/Fibre Glass hulls
|
|
The UL Ti MATE 75 SA 'Super Adjustable' (patent pending) weldin from Underwater Lights LIMITED ™ for aluminum and steel hulls can be installed in the transom or the hull. The SA reflector unit allows a change in beam direction of up to 20 degrees. This is available with either a 150 or 250 watt metal halide lamp with a 110-230 volt ELECTRONIC ballast, perfect for DC power on a yacht with either and aluminium or steel hull. A 30 and 50 degree angle is also available in both materials.
S00330 - 75 - SA - UL Ti MATE 75 SA 30 Degree Stainless Steel
S00350 - 75 - SA - UL Ti MATE 75 SA 50 Degree Stainless Steel
S00630 - 75 - SA - UL Ti MATE 75 SA 30 Degree 5083 Aluminium
S00650 - 75 - SA - UL Ti MATE 75 SA 50 Degree 5083 Aluminium |
|
The F-1 series offers a revolutionary new concept for underwater lighting for Super Yachts.
Achieving upto 25 degree hull angling within the fixture itself, it eliminates the need for massively long cofferdams, which improves Lamina flow and therefore fuel economy and ultimately speed whilst saving huge space inboard.
Being an LED powered unit (i.e. low maintenance) results in new thinking on yacht design. Old problems of access to 'traditional' underwater lights to change bulbs/service are now no longer as big a problem.
The F-1 Series is the most technically advanced underwater light every created. The unique 3 part delivery system offered by OceanLED ensures the very latest LED technology is utilized when the yacht is ready for launch.
Stage 1 - The Cofferdam assembly is delivered for the hot work (welding) to be completed.
Stage 2 - The electronics and cabling are supplied when needed.
Stage 3 - Light engine is delivered at the last stage to ensure the very latest LED technology is used.
The F-1 is currently being fitted to the latest new builds at the Feadship, Koninklijke De Vries Aalsmeer and Koninklijke De Vries Makkum facilities.
|
|
The OceanLED Puck Light fixture is designed to be used in Steel, Aluminium or Fibreglass hulls.
Cofferdams - We recommend tube for the Cofferdam walls to be sourced by the shipyard during installation to save on freight costs. OceanLED then supplies a Welding Back Plate which affixes to the tube creating the final Cofferdam for the light to be mounted.
Alternatively full cofferdams can be supplied.
For fibreglass hulls the follows along the same principal design where a molded pocket in the Fiberglass hull allows water to flow in and around the LED light enabling sufficient cooling.
If a General Arranagement (GA) can be supplied, our design department can assist in cofferdam design for maximum cost efficiency.
Full Cofferdams are available from us on request. |
|
Aqua Lights' bronze shines like gold and will never corrode!
Aqua Lights are sure to illuminate your water and the fish that surround you. Aqua Lights is your best source for premium marine underwater lights at deeply discounted prices!
Aqua Lights utilizes an all naval bronze housing that delivers a solid underwater illumination solution for your night time marine-life viewing.
BEST MOUNTING SURFACE: Fiberglass hull
REPLACING BULB:
Can be done from within vessel
UPGRADE TO:
35 Watt Xenon, 50 Watt Xenon,
75 Watt Halogen
BULBS USED:
(6) Green 5-Watt LED's
LUMENS:
900
LIGHT LIFE:
Approximately 20,000 hours
LENS TYPE:
Borosilicate glass lens is 0.6"/15mm
HOUSING:
Naval bronze
POWER SUPPLY:
12 volts running current 1 AMP/24 volts running current .5 AMP's
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft |
|
Aqua Lights constructs our poly-carbonate housing to delivers a solid underwater illumination solution for your night time marine-life viewing.
BEST MOUNTING SURFACE: Any surface
REPLACING BULB: Can be done from within vessel
BULBS USED: (6) White 5-watt LED's
LUMENS: 900
LENS TYPE: Optics
CONSTRUCTION: Poly-carbonate housing with bronze mounting hardware and aluminum insert
POWER SUPPLY: 12 to 24 volts DC 5 Amp
INSTALLATION:
6" to 48" below water line (Lenses tested to a depth of 300ft) Spacing between lights is 6ft to 8ft |
|
Armstrong Thru-Hull Lights are designed to enhance the boating experience of fishermen and divers. Available for both flush mount and surface mount applications. Utilizing a durable and simple, direct-wired fixture, Armstrong Lights are powered by 12/24 volt DC with no transformer needed and are easy to install.
Additional Features…
• Illuminate diving area to depths of 25 feet
• Attract bait fish
• No reflection – lights are submerged in normal use
• 50 watt Halogen
• 45,300 lux
• 2,000 hr lamp life
• Bulb easily accessible either internally or externally
|
|
The Xenon Thru-Hull SeaLite® is an extremely rugged system with unmatched light output. The low voltage (8-32V), 35-Watt gas discharge light produces intense white light for maximum penetration in seawater, and was engineered specifically to be a competitively priced, yet superior Xenon light.
As with all of DeepSea’s Thru-Hull SeaLites®, the Xenon-S comes standard with unique features that set it above all other thru-hull lights on the market. The sapphire crystal port is used for its strength and thermal characteristics. DeepSea is the only thru-hull light company to offer this highly durable, scratch resistant material. Sapphire crystal is much more efficient at transferring heat into the water than glass, allowing the light to run cooler for improved lamp life and safety. A fully sealed design (front and back) is incorporated to ensure that water in your bilge does not intrude through the back of the light, and, more importantly, if the front port were ever compromised, water will not leak into your boat. In addition, the Xenon-S uses a highly efficient reflector design, maximizing the amount of light that is transmitted from the lamp into the water and creating a nice, even dispersion of light.
The Xenon-S provides the peace of mind in knowing that it was designed by a company with over 20 years expertise as a leading manufacturer of underwater lights for oceanographic research, offshore oil and commercial divers. Thru-Hull SeaLites® - whiter, brighter and more durable. |
|
For decades DeepSea Power & Light has been designing innovative underwater products that exceed industry standards. The new 18 LED Thru-Hull SeaLite® is the next evolution of the proven Thru-Hull SeaLite® design.
Several features come together in the 18 LED Thru-Hull SeaLite® to create a light that offers amazing light output, is extremely rugged and most importantly, safe. There are 18 high color temperature LEDs, each with its own reflector to distribute the light for maximum effect. Thermal compensation circuitry regulates the temperature of the LEDs, improving the life of the LEDs and allowing the light to be run in air. The 316 stainless steel housing has two double seals, ensuring that the 18 LED Thru-Hull SeaLite® will remain watertight, even in the harshest environments. To simplify installation, the driver board is integrated into the watertight housing. The 18 LED Thru-Hull SeaLite® is even serviceable from inside the boat. And, with an ultra long life, the 18 LED Thru-Hull SeaLite® requires no bulb maintenance!
The 18 LED Thru-Hull SeaLite® provides the peace of mind in knowing that it was designed by a company with over 20 years expertise as a leading manufacturer of underwater lights for deep diving submersibles, offshore oil and commercial divers. Thru-Hull SeaLites® - whiter, brighter and more durable. |
|
| DeepSea Power & Light's line of Thru-Hull SeaLite® products set the standard for durability and performance. This extensive expertise was used to design the Halogen Thru-Hull SeaLite®. As with all of DeepSea's Thru-Hull SeaLites®, the Halogen comes standard with unique features that set it above all other thru-hull lights on the market. The sapphire crystal port is used for its strength and thermal characteristics. DeepSea is the only thru-hull light company to offer this highly durable, scratch resistant material. |
|
For decades DeepSea Power & Light has been designing innovative underwater products that exceed industry standards. The MiniLED Thru-Hull SeaLite® was engineered to fill a need for a powerful, rugged light, in a compact package.
Utilizing the latest in high brightness LED technology, the MiniLED Thru-Hull SeaLite® provides incredible light output for its size. The MiniLED Thru-Hull SeaLite® is ideal for center console boats, where space is at a premium, and price is an important consideration. All electronics are integrated in the watertight housing, providing protection and simplifying installation. Simply run the power cable from the back of the light to your power source – there is no driver box to mount or interconnect cable to route. The MiniLED Thru-Hull SeaLite® is even serviceable from inside the boat. With an ultra long life, the MiniLED Thru-Hull SeaLite® requires no bulb maintenance!
The MiniLED Thru-Hull SeaLite® provides the peace of mind in knowing that it was designed by a company with over 20 years expertise as a leading manufacturer of underwater lights for deep diving submersibles, offshore oil and commercial divers. Thru-Hull SeaLites® - whiter, brighter and more durable. |
|
| The UL Ti MATE 80 20 watt LED is available in 12 or 24 volt. |
|
Aqualuma 1 Series - The Aqualuma Advantage
-2 Unit Set.
-Master, Slave & Driver Set
-Wide angle elliptical beam 12° x 50°
-No Lens seal to leak
-Very low DC power consumption
-Draws less than 0.5 of an amp per light @ 12 volts
-Very low heat emission
-Can be operated out of the water
-Long life, high output LED light engine
-High impact resistant polycarbonate housing
-No bonding to anodes required (Housing cannot corrode)
-Light engine will accept 12 volt DC power source
-Serviceable from inside the boat
-Available in white, blue or green
-Cabling to suit your application : IP68 connectors Master to Slave, your loom to Master
-Ignition Protected
-5 year Warranty
-Australian designed and manufactured
-Easy install = low installation cost
-*Aqualuma Sealant Supplied |
|
Following on from the huge worldwide demand of the AQL 3 series, AQUALUMA releases the 6 series.
This new larger option has been designed in response to the large number of requests from the world's super yacht industry who have very quickly grasped the obvious advantages of the AQUALUMA products.
The AQL 6 series is available in the three colours Blue, White and Green.
The construction is the same as the proven AQL 3 series, corrosion proof, injection molded polycarbonate, internally driven and maintained.
What more can any boat owner want BUT the Tri Colour ... |
|
Aqua Lights are sure to illuminate your water and the fish that surround you. Aqua Lights is your best source for premium marine underwater lights at deeply discounted prices!
BEST MOUNTING SURFACE: Weld-in Aluminum
REPLACING BULB: Can be done from within vessel
BULB USED: 75 watt Halogen bulb
LUMENS: 1,250
LIGHT LIFE: Approximately 6000+ hours
LENS TYPE: Borosilicate glass lens is 0.4"/10mm
HOUSING: Aluminum
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft |
|
REPLACING BULB: Can be done from within vessel
BULB USED: 600-watt Metal Halide
LUMENS: 160,000
LIGHT LIFE: Approximately 6000+ hours
LENS TYPE: Borosilicate glass lens is 0.6"/15mm
HOUSING: Aluminum
POWER SUPPLY:
Our light is 12 volt start up current 18 amp for about 25 second & 3.5 amps continuous
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft |
|
Aqua Lights are sure to illuminate your water and the fish that surround you. Aqua Lights is your best source for premium marine underwater lights at deeply discounted prices!
BULB USED: 175-watt metal halide bulb
LUMENS: 27,000
LIGHT LIFE: Approximately 6000+ hours
REPLACING BULB: Can be installed from inside your vessel
LENS TYPE: Borosilicate glass lens is 0.5" thick
HOUSING: Aluminum
POWER SUPPLY: Dual ballast 120 (1 phase); 240 (1 phase); 280 (3 phase) volt, Running current 1.5-0.75 amps
CABLING: Length of cable to ballast must not exceed 40ft 15ft supplied; Custom length available
INSTALLATION:
12" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 5ft to 8ft |
|
The Sea Vision SV14 weld in model for aluminum hulls can be installed in the transom or the hull, it utilizes a 150 watt metal halide lamp and 110 or 230 volt AC power. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0-50 degree. All angle options are available on request.
|
|
The Sea Vision SV16 model utilizes a halogen lamp with 12 or 24 volt DC power and can be installed in the transom or the hull. Generally it should be installed in smaller boats and for the occasional light user.
|
|
Docks, pilings, marinas, waterside restaurants and houses can now experience the underwater lighting phenomenon with our DV24 dock light. The light has a PVC housing with a 100 watt halogen lamp and is available in 12 volt a.c./d.c. The reflector is a 45 degree wide angle for maximum light output. The dock light is fastened to a flat surface by way of two mounting brackets. The light is fully submersible and IP68 rated.
|
|
|
