|
|
BEST MOUNTING SURFACE: Fiberglass hull
REPLACING BULB: Can be done from within vessel
BULB USED: 35 watt Xenon bulb
LUMENS: 3600
LIGHT LIFE: Approximately 6000+ hours
LENS TYPE: Borosilicate glass lens is 0.5"/15mm
HOUSING: Naval bronze
POWER SUPPLY: Our light is 12 volt start up current 18 amps for about 25 second & 3.5 amps continuous
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft |
|
BEST MOUNTING SURFACE:
Fiberglass hull
REPLACING BULB:
Can be done from within vessel
BULB USED:
75 watt halogen bulb
LUMENS:
1,250
LIGHT LIFE:
Approximately 600+ hours
LENS TYPE:
Borosilicate glass lens is 0.4"/10mm
HOUSING:
Naval bronze
POWER SUPPLY:
12 volt running current 7 amps/ 24 volt running current 3 amps
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft
|
|
Aqua Lights' bronze shines like gold and will never corrode!
Aqua Lights' AL600MH Bronze is sure to illuminate your water and the fish that surround you. At 300 feet viewing range, you are sure to see the dolphins at play and hovering sting rays! Aqua Lights is your best source for premium marine underwater lights at deeply discounted prices!
BEST MOUNTING SURFACE:
Fiberglass hull
BULB USED:
600 watt Metal Halide bulb
REPLACING BULB:
Can be done from within vessel
LUMENS:
160,000
LIGHT LIFE:
Approximately 6000+ hours
LENS TYPE:
Borosilicate glass lens is 0.6"/15mm thick
HOUSING:
Naval Bronze
POWER SUPPLY:
Dual ballast 120 (1 phase)-240 (1 phase) 280 (3 phase) volt, running current 1.5-0.75amps
CABLING:
Length of cable to ballast must not exceed 40ft, 15ft supplied custom length available
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft |
|
BULB USED: 35-watt metal halogen
BEST MOUNTING SURFACE: Fiberglass hull
REPLACING BULB: Can be installed from inside your vessel
LUMENS: 550
LIGHT LIFE: Approximately 900+ hours
LENS TYPE: Borosilicate glass
HOUSING: Naval bronze
POWER SUPPLY: 12 volts
CABLING: 10ft
INSTALLATION: 12" to 48" below water line (Lenses tested to a depth of 300ft) Spacing between lights is 5ft to 8ft |
|
The Sea Vision SV10 model offers the largest aperture of all the fiberglass models giving maximum light output from the 150 watt metal halide lamp. It can be installed in the transom or the hull and is suitable for boats with 110-230 volt AC power, including sportfish, yachts and cruisers.
|
|
The Sea Vision SV20 model is our standard xenon light with a 35 watt xenon lamp and 12 or 24 volt ballast. This light is suitable for small boats wanting to utilize 12 or 24 volt DC power and can be installed on sport fishers, center consoles, cruisers and performance boats.
|
|
| The UL Ti MATE 80 55 watt Xenon (S02552), from Underwwater Lights LIMITED ™, model is our xenon light with a xenon lamp and 12 or 24 volt ballast. This light is suitable for small boats with 12 or 24 volt DC power and can be installed on sport fishers, center consoles, cruisers and performance boats. |
|
| The UL Ti MATE 80 - 100 watt halogen (S02555) by Underwater Lights LIMITED ™ uses a 100 watt halogen lamp with 12 or 24 volt DC power. |
|
The Sea Vision SV14 weld in model for aluminum hulls can be installed in the transom or the hull, it utilizes a 150 watt metal halide lamp and 110 or 230 volt AC power. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0-50 degree. All angle options are available on request.
|
|
The Sea Vision SV10 model offers the largest aperture of all the fiberglass models giving maximum light output from the 150 watt metal halide lamp. It can be installed in the transom or the hull and is suitable for boats with 110-230 volt AC power, including sportfish, yachts and cruisers.
|
|
Aqua Lights uses 316TI stainless steel that is nearly indestructible! This Aqua Light delivers a stainless underwater illumination solution for your night time marine-life viewing.
BULB USED: 175-watt metal halide bulb
LUMENS: 27,000
LIGHT LIFE: Approximately 6000+ hours
REPLACING BULB: Can be installed from inside your vessel
LENS TYPE: Borosilicate glass lens is 0.5" thick
HOUSING: Stainless Steel
POWER SUPPLY:
Dual ballast 120 (1 phase); 240 (1 phase); 280 (3 phase) volt, Running current 1.5-0.75 amps
CABLING:
Length of cable to ballast must not exceed 40ft 15ft supplied; Custom length available
INSTALLATION:
12" to 48" below water line (Lenses tested to a depth of 300ft) Spacing between lights is 5ft to 8ft |
|
The Sea Vision SV14 weld in model for steel hulls can be installed in the transom or the hull, it utilizes a 150 watt metal halide lamp and 110 or 230 volt AC power. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0-50 degree. All angle options are available on request.
|
|
The Sea Vision SV10 model offers the largest aperture of all the fiberglass models giving maximum light output from the 150 watt metal halide lamp. It can be installed in the transom or the hull and is suitable for boats with 110-230 volt AC power, including sportfish, yachts and cruisers.
|
|
IML Underwater Hull Light, 9-36VDC/35W HID Xenon (with lamp and ballast), Silicon Bronze, Clear Lens, IP68, D2 socket.
The IML HID Xenon Underwater Hull Light is manufactured specifically for the purpose of illuminating the marine environment around and/or underneath a ship's hull. Perfect for fishing, diving, or just plain entertainment. Careful consideration has been made in the selection of materials and components that make up this fixture. Its streamline bezel results in near zero drag when installed in hull's bottom. This fixture is supplied with a 35W HID Xenon Ballast & Bulb that delivers intense brilliant white light which cuts through the murkiest of water. HID technology delivers 45% more light output than conventional halogen lamps while consuming less energy and without any additional generated heat. This fixture is completely serviceable from behind, making bulb changes simple and fast without the hassle of hauling the vessel. |
|
IML Underwater Hull Light, 12V/50W HID Xenon (with lamp and ballast), Stainless Steel, Clear Lens, IP68, D2 Socket.
The IML HID Xenon Underwater Hull Light is manufactured specifically for the purpose of illuminating the marine environment around and/or underneath a ship's hull. Perfect for fishing, diving, or just plain entertainment. Careful consideration has been made in the selection of materials and components that make up this fixture. Its streamline bezel results in near zero drag when installed in hull's bottom. This fixture is supplied with a 50W HID Xenon Ballast & Bulb that delivers intense brilliant white light which cuts through the murkiest of water. HID technology delivers 45% more light output than conventional halogen lamps while consuming less energy and without any additional generated heat. This fixture is completely serviceable from behind, making bulb changes simple and fast without the hassle of hauling the vessel. |
|
IML Underwater Hull Light, 9-36VDC/35W HID Xenon (with lamp and ballast), Stainless Steel, Clear Lens, IP68, D2 socket (shown here with silicon bronze finish).
The IML HID Xenon Underwater Hull Light is manufactured specifically for the purpose of illuminating the marine environment around and/or underneath a ship's hull. Perfect for fishing, diving, or just plain entertainment. Careful consideration has been made in the selection of materials and components that make up this fixture. Its streamline bezel results in near zero drag when installed in hull's bottom. This fixture is supplied with a 35W HID Xenon Ballast & Bulb that delivers intense brilliant white light which cuts through the murkiest of water. HID technology delivers 45% more light output than conventional halogen lamps while consuming less energy and without any additional generated heat. This fixture is completely serviceable from behind, making bulb changes simple and fast without the hassle of hauling the vessel.. |
|
IML Underwater Hull Light, 12V/50W HID Xenon (with lamp and ballast), Stainless Steel, Clear Lens, IP68, D2 Socket.
The IML HID Xenon Underwater Hull Light is manufactured specifically for the purpose of illuminating the marine environment around and/or underneath a ship's hull. Perfect for fishing, diving, or just plain entertainment. Careful consideration has been made in the selection of materials and components that make up this fixture. Its streamline bezel results in near zero drag when installed in hull's bottom. This fixture is supplied with a 50W HID Xenon Ballast & Bulb that delivers intense brilliant white light which cuts through the murkiest of water. HID technology delivers 45% more light output than conventional halogen lamps while consuming less energy and without any additional generated heat. This fixture is completely serviceable from behind, making bulb changes simple and fast without the hassle of hauling the vessel. |
|
IML Underwater Hull Light, for 12/24V AC or DC, MR16, 75W max (bulb not included), Stainless Steel, Clear Lens, IP68.
The IML Underwater Hull Light is manufactured specifically for the purpose of illuminating the marine environment around and/or underneath a ship's hull. Perfect for fishing, diving or just plain entertainment. Careful consideration has been made in the selection of materials and components that make up this fixture. Its streamline bezel results in near zero drag when installed in hull's bottom. The fixture is designed to work with a 50W or 75W MR16 Halogen reflector lamp. This fixture is completely serviceable from behind, making bulb changes simple and fast without the hassle of hauling the vessel. |
|
IML Underwater Hull Light, for 12/24V AC or DC, MR16, 75W max (bulb not included), Silicon Bronze, Clear Lens, IP68.
The IML Underwater Hull Light is manufactured specifically for the purpose of illuminating the marine environment around and/or underneath a ship's hull. Perfect for fishing, diving or just plain entertainment. Careful consideration has been made in the selection of materials and components that make up this fixture. Its streamline bezel results in near zero drag when installed in hull's bottom. The fixture is designed to work with a 50W or 75W MR16 Halogen reflector lamp. This fixture is completely serviceable from behind, making bulb changes simple and fast without the hassle of hauling the vessel. |
|
| The IML HID Xenon Underwater Hull Light is manufactured specifically for the purpose of illuminating the marine environment around and/or underneath a ship's hull. Perfect for fishing, diving, or just plain entertainment. Careful consideration has been made in the selection of materials and components that make up this fixture. Its streamline bezel results in near zero drag when installed in hull's bottom. This fixture is supplied with a 50W HID Xenon Ballast & Bulb that delivers intense brilliant white light which cuts through the murkiest of water. HID technology delivers 45% more light output than conventional halogen lamps while consuming less energy and without any additional generated heat. This fixture is completely serviceable from behind, making bulb changes simple and fast without the hassle of hauling the vessel. |
|
IML Underwater Hull Light, 12V/50W HID Xenon (with lamp and ballast), Stainless Steel, Clear Lens, IP68, D2 Socket.
The IML HID Xenon Underwater Hull Light is manufactured specifically for the purpose of illuminating the marine environment around and/or underneath a ship's hull. Perfect for fishing, diving, or just plain entertainment. Careful consideration has been made in the selection of materials and components that make up this fixture. Its streamline bezel results in near zero drag when installed in hull's bottom. This fixture is supplied with a 50W HID Xenon Ballast & Bulb that delivers intense brilliant white light which cuts through the murkiest of water. HID technology delivers 45% more light output than conventional halogen lamps while consuming less energy and without any additional generated heat. This fixture is completely serviceable from behind, making bulb changes simple and fast without the hassle of hauling the vessel. |
|
IML Underwater Hull Light, 120/277VAC/150W (with lamp and ballast), stainless steel, clear lens, IP66, metal halide.
A high output 120/277VAC-150W (50/60Hz) Thru-Hull Light designed with utmost attention to thermal management (maintaining low operating temperature). Thermal cut-out switch will prevent overheating should the unit be left on while hull is out of the water when planing or during haul-out. Casing and bezel are made from 316 stainless steel. Also included is a high performance metal halide arc lamp & ballast. Ballast housing is complete with weather-proof connectors and pre-formed cabling. |
|
| Underwater floodlights complete Yachtlite's extensive product palette for yachts. Yachtlite provides highest quality underwater floodlights with certification from a long-standing reputable manufacturer. |
|
| ... products without information |
| |
|
|
see the results for the following category
