|
|
The UL Ti MATE 75 SA 'Super Adjustable' (patent pending) weldin from Underwater Lights LIMITED ™ for aluminum and steel hulls can be installed in the transom or the hull. The SA reflector unit allows a change in beam direction of up to 20 degrees. This is available with either a 150 or 250 watt metal halide lamp with a 110-230 volt ELECTRONIC ballast, perfect for DC power on a yacht with either and aluminium or steel hull. A 30 and 50 degree angle is also available in both materials.
S00330 - 75 - SA - UL Ti MATE 75 SA 30 Degree Stainless Steel
S00350 - 75 - SA - UL Ti MATE 75 SA 50 Degree Stainless Steel
S00630 - 75 - SA - UL Ti MATE 75 SA 30 Degree 5083 Aluminium
S00650 - 75 - SA - UL Ti MATE 75 SA 50 Degree 5083 Aluminium
|
|
The UL Ti MATE 475 'SA' Super Adjustable (S00475) (patent pending) from Underwater Lights LIMITED ™ houses the new Super Adjustable unit which allows a change in beam direction of up to 20 degrees. This is available with either a 150 or 250 watt metal halide lamp with a 110-230 volt ELECTRONIC ballast, perfect for AC power on GRP/Fibre Glass hulls
|
|
The UL Ti MATE 75 SA 'Super Adjustable' (patent pending) weldin from Underwater Lights LIMITED ™ for aluminum and steel hulls can be installed in the transom or the hull. The SA reflector unit allows a change in beam direction of up to 20 degrees. This is available with either a 150 or 250 watt metal halide lamp with a 110-230 volt ELECTRONIC ballast, perfect for DC power on a yacht with either and aluminium or steel hull. A 30 and 50 degree angle is also available in both materials.
S00330 - 75 - SA - UL Ti MATE 75 SA 30 Degree Stainless Steel
S00350 - 75 - SA - UL Ti MATE 75 SA 50 Degree Stainless Steel
S00630 - 75 - SA - UL Ti MATE 75 SA 30 Degree 5083 Aluminium
S00650 - 75 - SA - UL Ti MATE 75 SA 50 Degree 5083 Aluminium |
|
Aqua Lights are sure to illuminate your water and the fish that surround you. Aqua Lights is your best source for premium marine underwater lights at deeply discounted prices!
BULB USED: 175-watt metal halide bulb
LUMENS: 27,000
LIGHT LIFE: Approximately 6000+ hours
REPLACING BULB: Can be installed from inside your vessel
LENS TYPE: Borosilicate glass lens is 0.5" thick
HOUSING: Aluminum
POWER SUPPLY: Dual ballast 120 (1 phase); 240 (1 phase); 280 (3 phase) volt, Running current 1.5-0.75 amps
CABLING: Length of cable to ballast must not exceed 40ft 15ft supplied; Custom length available
INSTALLATION:
12" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 5ft to 8ft |
|
Aqua Lights are sure to illuminate your water and the fish that surround you. Aqua Lights is your best source for premium marine underwater lights at deeply discounted prices!
BEST MOUNTING SURFACE: Weld-in Aluminum
REPLACING BULB: Can be done from within vessel
BULB USED: 75 watt Halogen bulb
LUMENS: 1,250
LIGHT LIFE: Approximately 6000+ hours
LENS TYPE: Borosilicate glass lens is 0.4"/10mm
HOUSING: Aluminum
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft |
|
REPLACING BULB: Can be done from within vessel
BULB USED: 600-watt Metal Halide
LUMENS: 160,000
LIGHT LIFE: Approximately 6000+ hours
LENS TYPE: Borosilicate glass lens is 0.6"/15mm
HOUSING: Aluminum
POWER SUPPLY:
Our light is 12 volt start up current 18 amp for about 25 second & 3.5 amps continuous
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft |
|
The Sea Vision SV14 weld in model for aluminum hulls can be installed in the transom or the hull, it utilizes a 150 watt metal halide lamp and 110 or 230 volt AC power. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0-50 degree. All angle options are available on request.
|
|
Aqua Lights' bronze shines like gold and will never corrode!
Aqua Lights' AL600MH Bronze is sure to illuminate your water and the fish that surround you. At 300 feet viewing range, you are sure to see the dolphins at play and hovering sting rays! Aqua Lights is your best source for premium marine underwater lights at deeply discounted prices!
BEST MOUNTING SURFACE:
Fiberglass hull
BULB USED:
600 watt Metal Halide bulb
REPLACING BULB:
Can be done from within vessel
LUMENS:
160,000
LIGHT LIFE:
Approximately 6000+ hours
LENS TYPE:
Borosilicate glass lens is 0.6"/15mm thick
HOUSING:
Naval Bronze
POWER SUPPLY:
Dual ballast 120 (1 phase)-240 (1 phase) 280 (3 phase) volt, running current 1.5-0.75amps
CABLING:
Length of cable to ballast must not exceed 40ft, 15ft supplied custom length available
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft |
|
BEST MOUNTING SURFACE: Fiberglass hull
REPLACING BULB: Can be done from within vessel
BULB USED: 35 watt Xenon bulb
LUMENS: 3600
LIGHT LIFE: Approximately 6000+ hours
LENS TYPE: Borosilicate glass lens is 0.5"/15mm
HOUSING: Naval bronze
POWER SUPPLY: Our light is 12 volt start up current 18 amps for about 25 second & 3.5 amps continuous
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft |
|
BULB USED: 35-watt metal halogen
BEST MOUNTING SURFACE: Fiberglass hull
REPLACING BULB: Can be installed from inside your vessel
LUMENS: 550
LIGHT LIFE: Approximately 900+ hours
LENS TYPE: Borosilicate glass
HOUSING: Naval bronze
POWER SUPPLY: 12 volts
CABLING: 10ft
INSTALLATION: 12" to 48" below water line (Lenses tested to a depth of 300ft) Spacing between lights is 5ft to 8ft |
|
BEST MOUNTING SURFACE:
Fiberglass hull
REPLACING BULB:
Can be done from within vessel
BULB USED:
75 watt halogen bulb
LUMENS:
1,250
LIGHT LIFE:
Approximately 600+ hours
LENS TYPE:
Borosilicate glass lens is 0.4"/10mm
HOUSING:
Naval bronze
POWER SUPPLY:
12 volt running current 7 amps/ 24 volt running current 3 amps
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft
|
|
The Sea Vision SV10 model offers the largest aperture of all the fiberglass models giving maximum light output from the 150 watt metal halide lamp. It can be installed in the transom or the hull and is suitable for boats with 110-230 volt AC power, including sportfish, yachts and cruisers.
|
|
The Sea Vision SV20 model is our standard xenon light with a 35 watt xenon lamp and 12 or 24 volt ballast. This light is suitable for small boats wanting to utilize 12 or 24 volt DC power and can be installed on sport fishers, center consoles, cruisers and performance boats.
|
|
| The UL Ti MATE 80 - 100 watt halogen (S02555) by Underwater Lights LIMITED ™ uses a 100 watt halogen lamp with 12 or 24 volt DC power. |
|
| The UL Ti MATE 80 55 watt Xenon (S02552), from Underwwater Lights LIMITED ™, model is our xenon light with a xenon lamp and 12 or 24 volt ballast. This light is suitable for small boats with 12 or 24 volt DC power and can be installed on sport fishers, center consoles, cruisers and performance boats. |
|
Aqua Lights uses 316TI stainless steel that is nearly indestructible! This Aqua Light delivers a stainless underwater illumination solution for your night time marine-life viewing.
BULB USED: 175-watt metal halide bulb
LUMENS: 27,000
LIGHT LIFE: Approximately 6000+ hours
REPLACING BULB: Can be installed from inside your vessel
LENS TYPE: Borosilicate glass lens is 0.5" thick
HOUSING: Stainless Steel
POWER SUPPLY:
Dual ballast 120 (1 phase); 240 (1 phase); 280 (3 phase) volt, Running current 1.5-0.75 amps
CABLING:
Length of cable to ballast must not exceed 40ft 15ft supplied; Custom length available
INSTALLATION:
12" to 48" below water line (Lenses tested to a depth of 300ft) Spacing between lights is 5ft to 8ft |
|
The Sea Vision SV14 weld in model for steel hulls can be installed in the transom or the hull, it utilizes a 150 watt metal halide lamp and 110 or 230 volt AC power. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0-50 degree. All angle options are available on request.
|
|
IML Underwater Hull Light, 120/277VAC/150W (with lamp and ballast), stainless steel, clear lens, IP66, metal halide.
A high output 120/277VAC-150W (50/60Hz) Thru-Hull Light designed with utmost attention to thermal management (maintaining low operating temperature). Thermal cut-out switch will prevent overheating should the unit be left on while hull is out of the water when planing or during haul-out. Casing and bezel are made from 316 stainless steel. Also included is a high performance metal halide arc lamp & ballast. Ballast housing is complete with weather-proof connectors and pre-formed cabling. |
|
The original Thru-Hull with the worlds smallest hole cut-out for a thru hull light at only 1"! This light with a 30mm profile head makes it ideal for Transom mount applications. A very quick to fit and effective underwater light.
Suitable for Fiberglass, GRP and wooden hulls and now also available for use on aluminium/steel hulls using the delrin sleeve.
Lloyds Type Approved, RINA, ABS Type Approved, USCG Ignition Protected and ABYC H-27 Side Load approved.
All lights utilize Tritonium Optical lenses, and are supplied with a quick connect system by Deutsch ensuring almost 'fool proof' installation and compliance with ABYC, E11 regulations.
Available in 1010, 1520, 2010 & 3010 Series with Super White LEDs, Super Blue LEDs and the Super Green LEDs. |
|
Capture the magic of your own underwater aquarium beneath your boat with the superior quality Ocean camera. Watch on your salon TV or Plasma screen all the nightlife around, be amazed at the variety of fish and sealife attracted to the LED underwater lights.
The Ocean camera can also be used in conjunction with the onboard security system for your vessel offering 24 hour underwater surveillance.
The Ocean Camera is designed for fiberglass (GRP) hulls and can be fitted to aluminum or Steel hulls utilizing the optional Delrin Isolating sleeve.
We can also incorporate the camera into our Weld-IN fixtures for metal hulled vessels on special request.
|
|
Imagine schools of nurse sharks, fish, marlins, sailfish, dolphins and tuna coming right up to your boat!
The fish have come up to your boat...now what?
You've got to get their picture! Smile and say "plankton" :-)
TV SYSTEM: NTSC/PAL
IMAGE SENSOR: 1/4" CCO image sensor
CCD TOTAL PIXELS: 542(H) 496(V)/542(H)586(V)
CCD EFFECTIVE PIXELS: 512(H) 492(V)/512(H)58
SCANNING SYSTEM: 525 lines, 60 fields/sec.
SYNC SYSTEM: Internal
RESOLUTION: 470 TV Lines
VIDEO OUTPUT: 1.0Vp-p Composite video @ 75ohm
POWER SUPPLY: DC 12V/260mA (LED) |
|
The Thru-Hull SeaCam® is a color camera designed to mount thru the transom or hull of your boat, below the waterline, allowing for an exciting new view of your underwater surroundings.
The Thru-Hull SeaCam® is a wide-angle, fixed focus video camera that offers a high quality image, which can be routed to one or more displays on your boat. With a resolution of 460 horizontal TV lines and scene illumination of 0.2 Lux, this camera produces professional quality video, even at low light levels. The sapphire crystal port is one of the most durable and scratch resistant transparent materials available, ensuring a crisp, clear image.
The applications for this camera are endless. The Thru-Hull SeaCam® can be used to view the action on your line while fishing, to keep an eye on the kids while they are swimming, to inspect your propellers for damage or to view the beautiful aquarium below your boat while relaxing in the salon. Best of all, the compact size and 12V/24V input power make this camera suitable for fiberglass boats of almost any size.
The Thru-Hull SeaCam® provides the peace of mind in knowing that it was designed by a company with over 20 years expertise as a leading manufacturer of underwater cameras for oceanographic research, offshore oil and commercial divers. Thru-Hull SeaLites® - whiter, brighter and more durable. |
|
The completely waterproof camera can be installed in any of the underwater light housings for steel, aluminum or fiberglass hulls. The camera is placed in the housing and fixed with a mounting kit. It has exterior focus and zoom rings from 0.16" to 0.31"/ 4.0mm to 8.0mm, it offers broadcast quality pictures are 470 color lines of resolution and is 110 A/C or 12 VDC. The underwater images can be fed to any number of monitors or plasma screens through out the boat. The camera comes with a three year warranty and all maintenance, like the underwater lights is from within the hull. This underwater camera is perfect for viewing the aquatic life, as well as offering safety and security benefits.
|
|
The LUMA-Vu Underwater Camera continues AQUALUMA's commitment to enhancing your boating experience.
Imagine watching the aquatic life under the surface from the comfort of your saloon or bridge. The possibility of recording the tagging of that big marlin from a prospective never before available to you. Flick the switch on your AQUALUMA Underwater Lights and the show will continue into the night with the fish and squid schooling in the light. You may never watch a movie again.
Manufactured with the proven the AQUALUMA 3 series corrosion proof, injection molded polycarbonate housing, this Hi Res Color CCTV camera is virtually bullet proof. The LUMA-Vu comes in either NTSC or Pal Formats with a very wide angle 3.6mm lens. Get onboard with the future of Underwater technology with AQUALUMA's LUMA-Vu! |
|
Capture the magic of your own underwater aquarium beneath your boat with the superior quality Ocean camera. Watch on your salon TV or Plasma screen all the nightlife around, be amazed at the variety of fish and sealife attracted to the LED underwater lights.
The Ocean camera can also be used in conjunction with the onboard security system for your vessel offering 24 hour underwater surveillance.
The Ocean Camera is designed for fiberglass (GRP) hulls and can be fitted to aluminum or Steel hulls utilizing the optional Delrin Isolating sleeve.
We can also incorporate the camera into our Weld-IN fixtures for metal hulled vessels on special request.
|
|
Imagine schools of nurse sharks, fish, marlins, sailfish, dolphins and tuna coming right up to your boat!
The fish have come up to your boat...now what?
You've got to get their picture! Smile and say "plankton" :-)
TV SYSTEM: NTSC/PAL
IMAGE SENSOR: 1/4" CCO image sensor
CCD TOTAL PIXELS: 542(H) 496(V)/542(H)586(V)
CCD EFFECTIVE PIXELS: 512(H) 492(V)/512(H)58
SCANNING SYSTEM: 525 lines, 60 fields/sec.
SYNC SYSTEM: Internal
RESOLUTION: 470 TV Lines
VIDEO OUTPUT: 1.0Vp-p Composite video @ 75ohm
POWER SUPPLY: DC 12V/260mA (LED) |
|
The Thru-Hull SeaCam® is a color camera designed to mount thru the transom or hull of your boat, below the waterline, allowing for an exciting new view of your underwater surroundings.
The Thru-Hull SeaCam® is a wide-angle, fixed focus video camera that offers a high quality image, which can be routed to one or more displays on your boat. With a resolution of 460 horizontal TV lines and scene illumination of 0.2 Lux, this camera produces professional quality video, even at low light levels. The sapphire crystal port is one of the most durable and scratch resistant transparent materials available, ensuring a crisp, clear image.
The applications for this camera are endless. The Thru-Hull SeaCam® can be used to view the action on your line while fishing, to keep an eye on the kids while they are swimming, to inspect your propellers for damage or to view the beautiful aquarium below your boat while relaxing in the salon. Best of all, the compact size and 12V/24V input power make this camera suitable for fiberglass boats of almost any size.
The Thru-Hull SeaCam® provides the peace of mind in knowing that it was designed by a company with over 20 years expertise as a leading manufacturer of underwater cameras for oceanographic research, offshore oil and commercial divers. Thru-Hull SeaLites® - whiter, brighter and more durable. |
|
The completely waterproof camera can be installed in any of the underwater light housings for steel, aluminum or fiberglass hulls. The camera is placed in the housing and fixed with a mounting kit. It has exterior focus and zoom rings from 0.16" to 0.31"/ 4.0mm to 8.0mm, it offers broadcast quality pictures are 470 color lines of resolution and is 110 A/C or 12 VDC. The underwater images can be fed to any number of monitors or plasma screens through out the boat. The camera comes with a three year warranty and all maintenance, like the underwater lights is from within the hull. This underwater camera is perfect for viewing the aquatic life, as well as offering safety and security benefits.
|
|
The LUMA-Vu Underwater Camera continues AQUALUMA's commitment to enhancing your boating experience.
Imagine watching the aquatic life under the surface from the comfort of your saloon or bridge. The possibility of recording the tagging of that big marlin from a prospective never before available to you. Flick the switch on your AQUALUMA Underwater Lights and the show will continue into the night with the fish and squid schooling in the light. You may never watch a movie again.
Manufactured with the proven the AQUALUMA 3 series corrosion proof, injection molded polycarbonate housing, this Hi Res Color CCTV camera is virtually bullet proof. The LUMA-Vu comes in either NTSC or Pal Formats with a very wide angle 3.6mm lens. Get onboard with the future of Underwater technology with AQUALUMA's LUMA-Vu! |
|
... see all the products in the category
| |
