|
|
|
The UL Ti MATE 80 - 100 watt halogen (S02555) by Underwater Lights LIMITED ™ uses a 100 watt halogen lamp with 12 or 24 volt DC power.
|
|
Seablaze2 Underwater light leverages the ease of installation, high intensity and extreme durability of the original SeaBlaze, but offers 15% greater output and an even more attractive appearance. All control circuitry is contained within the fixture, so no external drive modules are needed. The luminaire requires only a small through-transom wire hole, so installation is fast and easy. Available in ultra-bright white or blue output. 10 to 30VDC, draws 950mA @ 12V, 475mA @ 24VDC.
Lumitec again raises the bar in terms of features, performance, and price in underwater lighting. Boasting light output equal to that of competitors costing 3 to 5 times more, SeaBlaze3 is available in 4 output options, including 2 color. Surface mount for fast easy installation.
|
|
SeaBlaze3 (dual color) Underwater LED Light
Lumitec again raises the bar in terms of features, performance, and price in underwater lighting. Boasting light output equal to that of competitors costing 3 to 5 times more, SeaBlaze3 is available in 4 output options, including 2 color. Surface mount for fast easy installation.
|
|
1W Single chip, 316 stainless steel, fixed low voltage LED fittings
IP68 Rated screw threaded body with silicon seals and hexagonal lock-nut allows fitting in underwater environments.
Mounting surface thickness - Min. 2mm, Max. 12mm
NON-REPLACEABLE white LED life of up to 30,000 hours (Due to the nature of LED's a slight colour variation from lamp to lamp is possible)
Submersible to a depth of 1m
Fitted with 1m of cable for connection to a 350mA Constant Current LED driver (N.B. to be wired in SERIES)
Maximum 9pcs connected to a 9W Constant Current LED controller
Cool operating temperature
Available in stainless steel finish
Dimmable with AU-LEDD16CC driver and AU-DSPLED dimmer unit
|
|
|
The UL Ti MATE 80 20 watt LED is available in 12 or 24 volt.
|
|
- Polished or Chrome Plated Bronze with Mounting Ring
- Two Bulb Options
25° Beam Bulb (3000 CB Candle Power)
40° Beam Bulb (1700 CB Candle Power)
- 10 Feet of 16/2 Electrical Cable
- Safety Seal Design Prevents Water Intrusion in the Event of Glass Breakage
- Terminal for Bonding Wire
- DP Includes Green & Blue Lens Filters
|
|
|
The UL Ti MATE 80 55 watt Xenon (S02552), from Underwwater Lights LIMITED ™, model is our xenon light with a xenon lamp and 12 or 24 volt ballast. This light is suitable for small boats with 12 or 24 volt DC power and can be installed on sport fishers, center consoles, cruisers and performance boats.
|
|
The triple LED dock light (Ref. S40351) uses three 3 watt LED’s. The light is IP 68.
If this light is to be used underwater, the driver required is S41105 for each individual light.
If this light is to be used above water, the driver required is S41104 for every 2 lights.
|
|
The only Underwater Light for Sailing Boats. Power Supply with LED protection against heat in case the product is accidentally powered out of water.
It uses a Through Hull normally used for LOGs. Easy to install and maintain.
-Aluminium Bronze Body
-Vin: 10-30VDC
-18W LED
-1000 lumen
-Light color available: Pure white 6500°K, BLU, GREEN
|
|
Model S 1206: (Bronze) spotlight strong narrow beam
Will penetrate the water up to * 100 feet giving
a crisp detailed view of submarine life.
6 LED – 18 watt, 45 degrees beam, draw only
1.5 Amp at 12 volts, 750 Lumens at 9000 Kelvin.
Diameter 4 ½ (114 m/m) thickness 1” (25.4 m/m)
This model is supplied with external power regulator.
(12V/24V)
|
|
|
Underwater floodlights complete Yachtlite's extensive product palette for yachts. Yachtlite provides highest quality underwater floodlights with certification from a long-standing reputable manufacturer.
|
|
Model S 800: (Bronze) Powerful 12 LED flood wide angle
will illuminate up to * 50 feet.
12 LED – 16 watt, 90 degree beam angle.
Draw 1.3 Amp at 12 volts, 450 Lumens at 8400 Kelvin.
Diameter 3 ½ (88 m/m) thickness 11/16 (18 m/m)
The S 800 is supplied with external power regulator
|
|
Description:
- Polished or Chrome Plated Bronze with Mounting Ring
- 10 Feet of 16/2 Electrical Cable
- Safety Seal Design Prevents Water Intrusion in the Event of Glass Breakage
- Terminal for Bonding Wire
- L.E.D.'s Provide Longer Life, Less Heat and 1/10th the Energy of Standard Lights
|
|
Model S 1515: (Bronze) Powerful 15 LED flood angle will illuminate up to * 100 feet.
15 LED – 36 watt, 90 degree beam angle.
Draw 3 Amp at 12 volts, 1610 Lumens at 8400 Kelvin.
Diameter 5 3/4 (146 MM) thickness 11/16 (27 MM)
The S 1515 is supplied with external power regulator
|
|
Model S 600: (Stainless Steel) flood wide angle illuminates up to * 30 feet around the transom area.
6 LED – 12 watt will draw only 1 Amp at 12 volts.
Large 100 degrees angle, 350 Lumens at 7200 Kelvin.
Diameter 3 1/8 (80 m/m) thickness 9/16 (15 m/m)
|
|
SCOUT OF HULL 6 LED 1w RED, VARI (angle 60°)
As an indication, a traditional halogenous bulb of 50-55 W replaces
6 LED of power
Scout of Hull with integrated driver
Detailed description:
Diameter: 90 mm
Thickness: 10 mm
Tension: 10 to 30 V AC OR cd. (system of regulation integrated)
Consumption: 6 W
Lighting: RED
Reference: 04HULL 6VARI RED
|
|
FishGLOW Underwater LED Lights for Boats
FishGLOW lights utilize the latest state of the art, high output, 12-volt, Light Emitting Diodes (LED's) as their source. The emerging LED technology allows for lower power consumption, improved reliability and increased longevity over conventional lighting. FishGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The curcuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount FishGLOW lights on the transom, at least 6-8 inches below the water line. Then pass the included 12' marine grade power cable from each light, through a small opening above the hull's water line or a suitable existing opening in the transom. FishGLOW lights connect to the included 20' power supply cable with a simple-to-use, color coded quick connect, which plug together in only one way.
|
|
|
Use the LED flashlight to show the sea creatures in the night, floodlight to show off the outline of the marine, the illuminative light as new fashion illumination.Water-proof,stainless steel cover,safe,high brightness and as long as 50000 working hours.
|
|
|
Use the LED flashlight to show the sea creatures in the night, floodlight to show off the outline of the marine, the illuminative light as new fashion illumination.Water-proof,stainless steel cover,safe,high brightness and as long as 50000 working hours.
|
|
DockGLOW lights are ideal for backyard docks, marinas, waterfront restaurants, sea walls, resorts, etc. They utilize the latest state of the art, high output, Light Emitting Diodes (LED's) as their source. DockGLOW LED's are designed to run off standard 110 Volt household current through the use of a UL certified power supply box. DockGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The circuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount DockGLOW lights on the pylon, at least 6-8 inches below the water line (below the low tide water line). Then run the included 30' marine grade power supply cable to the power supply junction box (included). The cable connectors offer a simple-to-use, quick connect, which plug together in only one way.
|
|
| ... products without information |
| |
|
|
