|
|
Ezzy Mast Bag - $20.00
Three Sizes:
340/370
400/430
460/490
|
|
| ... products without information |
| |
Not only hoses but also cables, ropes and umbilicals need to be lightened under water. Resinex gives its customers a complete range of floats with reduced diameters. The key success factor of this activity is tightening. The floats cannot slip on the cable when assembled. Resinex has developed particular polyurethane clamps and reducers to maximize the grip on the cable surface. Particular studies have been carried on to give our products the best mix between loads, weight of materials and tightening forces.
Now we can supply different solutions to garantee the higher tightening force together with the usual high resistance to pressure until a 7.000 meter depth. |
|
Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.
Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.
NEW mounting foot design for 2008 - even easier installation.
Features
- Easy and quick to install with all fastenings supplied
- Attached to mast by four swivel feet matching the profile of any mast
- 12 point fixing using highest quality Monel rivets for a secure installation
- Nylon washers for all fastenings to protect paint finish
- Waterproof cable grommet included to seal cable entry into mast |
|
| Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5. |
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. Please fill out the form below to start the process.
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck |
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck |
|
| ... products without information |
| |
| Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5. |
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. Please fill out the form below to start the process.
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck |
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck |
|
The KF-H (patented) is the only system on the market that combines the furling and the locking mechanism in the same unit.
The lock mechanism allows to lock the swivel, the halyard and the sail directly onto the mast.
The lock works automatically using the halyard to lock and to unlock.
Used for flying sails (such as staysails and gennakers) it replaces the usual block system where luff tension comes from the long 2/1 or 3/1 halyard and a lot of compression in the mast.
The system and the sail are locked on the mast and the luff is tensioned from the bottom by a 2/1 or 3/1 purchase placed under the lower part of the furler.
The compression in the mast is minimized and it is possible to use a smaller and lighter halyard as it only carries the weight of the sail.
Once the system is dropped on deck, there is only the very light hollowed male end remaining on the mast and the furling-lock mechanism is on deck and accessible for maintenance.
EXCLUSIVE ADVANTAGES OF THE K-FH
-no more structural halyard
-no more blocks above the swivel
-less compression in mast = safer
-smaller halyard diameter = lighter
-straighter sail luff
-very light weight at the top of the mast when system is not in use.
|
|
| Sold separately or with a furler, this new patented system from Karver allows to lock the stay and the sail on the mast very easily. From 1,5T to 15T |
|
| ... products without information |
| |
| ... products without information |
| |
... see all the products in the category
Boom vangs
|
|
|
