|
|
ATS 160 - 400
This group includes the following models: (the number indicates the lifting capacity for the model)
ATS 160 /ATS 200 / ATS 260 / ATS 300 / ATS 320 / ATS 400
|
|
This group includes the following models: (the number indicates the lifting capacity for the model)
BHT 500 / BHT 600 / BHT 700 / BHT 900
|
|
BHT 25 - 130
This group includes the following models: (the number indicates the lifting capacity for the model) BHT 25 / BHT 40 / BHT 50 / BHT 70 / BHT 80 / BHT 100 / BHT 130
|
|
|
This group includes the following models: (the number indicates the lifting capacity for the model) BHT 160 / BHT 200 / BHT 250 / BHT 300 / BHT 350 / BHT 400
|
|
BOAT LIFT mobile boat haulers are designed and manufactured to guarantee the utmost safety and reliability relying on the most up-to-date technology.
All our machines feature an electronic steering system for a perfect wheel alignment under any circumstances. Just by pressing a push-button on the touch screen it is possible to pass from one mode to another: four steering wheels - two steering wheels and two skid steering - crab steering.
|
|
|
|
|
|
|
Photo: Boat-Hoist mod. BHT 160, 160 metric tonne capacity.
Our production includes a wide range of Standard and Amphibious Boat-Hoists, with a lifting capacity from 25 to 1000 Metric Tonne.
All models, are also available in the Amphibious configuration that don't need the docks-side, but travel on the existing slip-way in reinforced concrete directly, a fully load, with a slope from 8% up to 14%, the first of it working since 1982. This solution, permit you the save money in docks-side construction, save time because you can work the same day that you receive the machine, because you don’t need any bureaucratic authorizations.
Every Machine is standard equipped with; All Wheels Steering, Electronic Weighing System with LCD Displays, and Remote Radio Control System and Proportional Speed.
At the moment, a part the many Boat-Hoists in construction with capacity up to 300 M.T. we have to deliver;
- One Boat-Hoist of 450 M.T.
- One Boat-Hoist of 560 M.T.
- Two Boat-Hoists of 600 M.T.
- Two Boat-Hoists of 700 M.T.
- One Boat-Hoist of 820 M.T.
|
|
This group includes the following models: (the number indicates the lifting capacity for the model)
BHT 500 / BHT 600 / BHT 700 / BHT 900
|
|
This group includes the following models: (the number indicates the lifting capacity for the model)
BHT 500 / BHT 600 / BHT 700 / BHT 900
|
|
|
This group includes the following models: (the number indicates the lifting capacity for the model) BHT 160 / BHT 200 / BHT 250 / BHT 300 / BHT 350 / BHT 400
|
|
|
This group includes the following models: (the number indicates the lifting capacity for the model) BHT 160 / BHT 200 / BHT 250 / BHT 300 / BHT 350 / BHT 400
|
|
|
|
|
|
|
travel lift
Travel lift Paul de Nicholas
ELIDRA 80 TON
MOTOSCALO: the machine is destined to the movimentazione of heavy boats, to engine and to sail, for the towage and I launch on two docks to sea. Our production previews the construction of blots some with capacity from a minimum of 8 ton. to a maximum of 1000 ton., also in the AMPHIBIOUS VERSION.
They are moreover available, at call, all the completion accessories which, as an example, crane of service, crosspieces to "V" for sailing boats, steerings
details, arrange of weighing and cabins of commando.
COMMANDOS: the standard previews, beyond to a panel of emergency commandos, also a remote control with the possibility to control, in intuitivo way, the movements of the machine.
TRANSLATION: the machine has four carrying, simple wheels or gemellate, according to the several models. The hydraulic system of translation allows variations of continuous speeds and graduates them besides the sweetest and micrometric movements.
STEERING: the standard previews a steering to time corrected on all the revolving drive wheels on push bearings, that it allows the machine to around arrange the concentric wheels to a fixed point. At call we can supply also only 2 steering wheels.
We can moreover supply an integral system that concurs to obtain
various conditions, which as an example the steering to 90°, sghimbescio
and to carosello.
|
|
Photo: Boat-Hoist mod. BHT 700, 720 metric tonne capacity.
Our production includes a wide range of Standard and Amphibious Boat-Hoists, with a lifting capacity from 25 to 1000 Metric Tonne.
All models, are also available in the Amphibious configuration that don't need the docks-side, but travel on the existing slip-way in reinforced concrete directly, a fully load, with a slope from 8% up to 14%, the first of it working since 1982. This solution, permit you the save money in docks-side construction, save time because you can work the same day that you receive the machine, because you don’t need any bureaucratic authorizations.
Every Machine is standard equipped with; All Wheels Steering, Electronic Weighing System with LCD Displays, and Remote Radio Control System and Proportional Speed.
|
|
|
Ecological travel lift, fed from two interchanging batteries in order to concur a job autonomy at least 12 hours every day.
|
|
|
|
|
|
|
MOTOSCALO: the machine is destined to the movimentazione of heavy boats, to engine and to sail, for the towage and I launch on two docks to sea. Our production previews the construction of blots some with capacity from a minimum of 8 ton. to a maximum of 1000 ton., also in the AMPHIBIOUS VERSION.
They are moreover available, at call, all the completion accessories which, as an example, crane of service, crosspieces to "V" for sailing boats, steerings
details, arrange of weighing and cabins of commando.
COMMANDOS: the standard previews, beyond to a panel of emergency commandos, also a remote control with the possibility to control, in intuitivo way, the movements of the machine.
TRANSLATION: the machine has four carrying, simple wheels or gemellate, according to the several models. The hydraulic system of translation allows variations of continuous speeds and graduates them besides the sweetest and micrometric movements.
STEERING: the standard previews a steering to time corrected on all the revolving drive wheels on push bearings, that it allows the machine to around arrange the concentric wheels to a fixed point. At call we can supply also only 2 steering wheels.
We can moreover supply an integral system that concurs to obtain
various conditions, which as an example the steering to 90°, sghimbescio
and to carosello.
|
|
|
|
|
|
|
MOTOSCALO: the machine is destined to the movimentazione of heavy boats, to engine and to sail, for the towage and I launch on two docks to sea. Our production previews the construction of blots some with capacity from a minimum of 8 ton. to a maximum of 1000 ton., also in the AMPHIBIOUS VERSION.
TROLLIFT: travel-lift to careggiata variable with hanging boat. Patented product.
They are moreover available, at call, all the completion accessories which, as an example, crane of service, crosspieces to "V" for sailing boats, steerings details, arranges of weighing and cabins of commando.
COMMANDOS: the standard previews, beyond to a panel of emergency commandos, also a remote control with the possibility to control, in intuitivo way, the movements of the machine.
TRANSLATION: the machine has four carrying, simple wheels or gemellate, according to the several models. The hydraulic system of translation allows variations of continuous speeds and graduates them besides the sweetest and micrometric movements.
STEERING: the standard previews a steering to time corrected on all the revolving drive wheels on push bearings, that it allows the machine to around arrange the concentric wheels to a fixed point. At call we can supply also only 2 steering wheels.
We can moreover supply an integral system that concurs to obtain various conditions, which as an example the steering to 90°, to sghimbescio and carosello.
|
|
|
|
|
|
|
MOTOSCALO: the machine is destined to the movimentazione of heavy boats, to engine and to sail, for the towage and I launch on two docks to sea. Our production previews the construction of blots some with capacity from a minimum of 8 ton. to a maximum of 1000 ton., also in the AMPHIBIOUS VERSION.
They are moreover available, at call, all the completion accessories which, as an example, crane of service, crosspieces to "V" for sailing boats, steerings details, arranges of weighing and cabins of commando.
COMMANDOS: the standard previews, beyond to a panel of emergency commandos, also a remote control with the possibility to control, in intuitivo way, the movements of the machine.
TRANSLATION: the machine has four carrying, simple wheels or gemellate, according to the several models. The hydraulic system of translation allows variations of continuous speeds and graduates them besides the sweetest and micrometric movements.
STEERING: the standard previews a steering to time corrected on all the revolving drive wheels on push bearings, that it allows the machine to around arrange the concentric wheels to a fixed point. At call we can supply also only 2 steering wheels.
We can moreover supply an integral system that concurs to obtain various conditions, which as an example the steering to 90°, to sghimbescio and carosello.
|
|
|
|
|
|
|
The Dock Side Crane is Electrical slewing with luffing boom, moving on rails. All mechanical and steelwork components are designed and fabricated in our workshop. The crane is fabricated based on the most recent technological processes.
The crane, which moves on rails along the dock, consists of:
- A portal framework with rigid legs made of welded steel sheets, supported by equalizing trolleys that carry the wheels and the rolling mechanisms.
The framework will house the ballast required to prevent the crane itself from overturning.
- A middle column housing the ladder that provides access to the upper levels.
On the top of the column, a slew drive is placed, designed to bear the thrusts caused by the wind and the overturning moment of the slewing part.
- A rotating platform where the command cabin and the cabin housing the winches and the rotation mechanisms are positioned.
On the rear part of the platform itself, a counterweight is fitted to ensure that the slewing part of the crane is always balanced.
- A luffing boom consisting of a lattice truss, hinged to the rotating platform.
- A set of ladders and catwalks that provide access to the cabin and to the various mechanisms located outside the cabin.
|
|
|
|
|
|
|
MOTOSCALO: the machine is destined to the movimentazione of heavy boats, to engine and to sail, for the towage and I launch on two docks to sea. Our production previews the construction of blots some with capacity from a minimum of 8 ton. to a maximum of 1000 ton., also in the AMPHIBIOUS VERSION.
They are moreover available, at call, all the completion accessories which, as an example, crane of service, crosspieces to "V" for sailing boats, steerings
details, arrange of weighing and cabins of commando.
COMMANDOS: the standard previews, beyond to a panel of emergency commandos, also a remote control with the possibility to control, in intuitivo way, the movements of the machine.
TRANSLATION: the machine has four carrying, simple wheels or gemellate, according to the several models. The hydraulic system of translation allows variations of continuous speeds and graduates them besides the sweetest and micrometric movements.
STEERING: the standard previews a steering to time corrected on all the revolving drive wheels on push bearings, that it allows the machine to around arrange the concentric wheels to a fixed point. At call we can supply also only 2 steering wheels.
We can moreover supply an integral system that concurs to obtain
various conditions, which as an example the steering to 90°, sghimbescio
and to carosello.
|
|
|
|
|
|
|
MOTOSCALO: the machine is destined to the movimentazione of heavy boats, to engine and to sail, for the towage and I launch on two docks to sea. Our production previews the construction of blots some with capacity from a minimum of 8 ton. to a maximum of 1000 ton., also in the AMPHIBIOUS VERSION.
They are moreover available, at call, all the completion accessories which, as an example, crane of service, crosspieces to "V" for sailing boats, steerings details, arranges of weighing and cabins of commando.
COMMANDOS: the standard previews, beyond to a panel of emergency commandos, also a remote control with the possibility to control, in intuitivo way, the movements of the machine.
TRANSLATION: the machine has four carrying, simple wheels or gemellate, according to the several models. The hydraulic system of translation allows variations of continuous speeds and graduates them besides the sweetest and micrometric movements.
STEERING: the standard previews a steering to time corrected on all the revolving drive wheels on push bearings, that it allows the machine to around arrange the concentric wheels to a fixed point. At call we can supply also only 2 steering wheels.
We can moreover supply an integral system that concurs to obtain various conditions, which as an example the steering to 90°, to sghimbescio and carosello.
|
|
No comment is necessary.. the picture speaks greatly.
It is a fantastic machine, working over a 13m width basin.
Travel lift with 16 tyres with steearing and lifting PLC controlled.
Steering, coming from the great experience of Paolo De Nicola, is made by the "Slewing Rings-Piston" system.
Our company was the first to introduce in the sector systems like: "Slewing Rings" and "spur gear driven types". At the end we can ensure that the "Slewing Rings-Piston" system has much more pros and can do the same steering movements.
Our machines are always tested with overload: 10% on the nominal lifting capacity on movement (dynamic test) and 25% static (static test). An important guarantee of good working.
Contact us to know better the features of our machines but note that we are an engineer company, we do not have a standard, we customize according to your needs.
|
|
The Mobile Harbour Crane was designed to be a multi-function hoisting means, fast and strong, capable of meeting any possible need in a simple and economic way.
Any movement of the crane is commanded from the control cabin.
The crane moves on steering wheel holders, half of which powered, which are transversally balanced and hydraulically bumpered so as to achieve a uniform distribution of the load over the two wheels.
N° 4 stabilizers, located at the ends of the trolley, are hydraulically operated by a jack housed in the structure of the stabilizer itself.
|
|
The equipment, used for transporting and handling cruise-boat elements weighing up to 300t, has a lifting travel - under the hook - of 50m and a span of 45m.
Besides, we can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
|
|
|
A Marine Travelift self-propelled transporter can maximize profitability and boat handling efficiency by allowing boatyards to store boats in closer proximity, and thus virtually doubling the available yard capacity. A remote controlled transporter is designed to work in tandem with a Marine Travelift boat hoist to best utilize time and manpower, but more importantly, increase a boatyard’s revenue substantially.
|
|
|
|
|
|
|
The Hydrotrans RM-series is a 4 wheel steering, self powered and radio remote controlled transporter. This series of transporters will transport boats or other material on four-point cradles. The engine and hydraulic pumps can be placed at the side or the front of the transporter. The wheels are driven by hydraulic motors. The energy source and steering controls are all carefully and safely hidden in the motor compartment, this compartment is also isolated to reduce noise.
Built with High Grade S355 Steel, the RM-series is available from 20 tons and up.
Hydrotrans has been engineering and building boat and material handling equipment since 1996. A wide range of custom designs can also be provided to suit individual requirements.
All Hydrotrans equipment are built according to CE-regulations and tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Lease to purchase options are available.
Contact us for additional information or a free quotation.
|
|
The S1 Wheel Pilot is the successor to the popular ST4000 Plus Wheel drive system. The new S1 system uses the versatile ST6002 control head combined with the S1 SmartPilot course computer for maximum performance. Permanently installed and fully enclosed, this is a drive system that delivers the convenience and performance of an inboard autopilot. Gone are the obstructive and untidy belts and wires of conventional wheel autopilots.
The S1 Wheel pilot system is a patented solution that gives you a wheel drive that you can engage or disengage at the kick of a lever. A rear-mounted plug enables the drive unit to be detached for service or security reasons, without disturbing the wiring harness.
|
|
The rugged CPT is a cost effective crew member that steers your vessel so that you can take your hands off the wheel, whether motoring or sailing. This cockpit wheel pilot is easy to install and operate.
Strong and Dependable
The CPT is constructed ruggedly for a long life in the marine environment. It uses a gimballed optical compass, capable of operating at up to 45 degrees of tilt with no loss in accuracy. The CPT sensor responds quickly and works reliably in the cockpit.
The strength of the CPT comes from the size of its motor and gearing. The robust motor of the CPT produces high torque and rpm at the wheel, allowing it to respond fast with torque to spare. Because of the speed of its motor, the CPT can handle large boats with hydraulic steering, which can have many turns lock to lock.
|
|
Boats 40-60 ft with hydraulic steering
Part No:
20620044: Autopilot instrument
20100001: Servo unit 1510
20330004: Rudder angle transmitter
20810054: Pumpset PF-0.3G
20640006: Compas transducer 45°
|
|
- Unparalleled "Adaptive" technology allows NAVpilot to continue improving your vessel's steering on every voyage
- Auto set-up and Self-learning for vessel speed and course
- Versatile, high-resolution LCDs allow for a variety of user-defined display configurations
- One-touch operation for Standby, Auto and Nav modes
- Exclusive FishHunter feature guides your vessel in orbit, figure eight or spiral maneuvers around fish targets
- Network up to six full-size NAVpilot-500, compact NAVpilot-511 and/or handheld NAVpilot-520 control units
- The NAVpilot-520 (handheld type) can work as a full-functioned remote control unit within a NAVpilot system
- Multi language: English, French, German, Italian, Portuguese and Spanish
- Optional junction box for NAVpilot 520 is available for remote operation
|
|
Multifunction housings for every type of electronical instruments to apply to the Solimar's steering systems or universal
Other available accessories:
Autopilot levers
Tiller caps & water/fuel caps in aluminium or stainless steel
Aluminium monolever engine box
Monolever engine box
Housings & cockpit tables
Leather or Lorica covers - kit do-it-yourself in leather or Lorica
Crosstree/bottle screw/winch covers in Lorica
Cover for steering system in plastic
|
|
|
|
