|
|
The self propelled boat trailer for marinas
Sublift 12t handles boats with a maximum weight of 12 ton and a width up to 4,4 m.
The frame on the Sublift is of an open U-type enabling easy loading and unloading of a boat to and from its supports. The Sublift makes it easy to bring a boat on land to wash the bottom and do other work where the boat needs to be out of the water. This enables boat owners to use less toxic paint and therefore save both the environ-ment and money. It is easier to lunch the boat out of the water twice a year and wash it than to paint the hull with toxic paint.
|
|
The self propelled heavy lifter for marinas
With the Sublift 25t it is possible to launch a boat in and out of the water with a weight of up to 25 tons. All the controls are on a hand held control box. On the display of the control box the weight distribution of the load is indicated. The ability to control the hydraulic cylinders in pairs enables the operator to level the boat regardless of the inclination and tilt angles of the ground.
The lift arms centre the boat when it is lifted and transported during launching operations.
The Swedish military uses the Sublift for boat handling. From 2001 the Mexican and Malaysian military also uses the Sublift for boat handling.
|
|
A super flexible Sublift in a bigger model series
With the Sublift 40t it is possible to launch a boat in and out of the water with a weight of up to 40 tons. All the controls are on a hand held control box. On the display of the control box the weight distribution of the load is indicated.
The ability to control the hydraulic cylinders in pairs enables the operator to level the boat regardless of the inclination and tilt angles of the ground.
|
|
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
Picture : Mobile Boat Hauler MBH 160 - Max carrying capacity 160t
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
Picture : Mobile Boat Hauler MBH 400 - Max carrying capacity 400t
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating a Mobile Boat Hauler MBH with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
Picture : Mobile Boat Hauler MBH 260 - Max carrying capacity 260t
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
Picture : Mobile Boat Hauler MBH 600 - Max carrying capacity 600t.
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
Picture : Mobile Boat Hauler MBH 820 - Max carrying capacity 820t
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide
|
|
Picture : Mobile Boat Hauler MBH 820 - Max carrying capacity 820t
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
The Dock Side Crane is Electrical slewing with luffing boom, moving on rails. All mechanical and steelwork components are designed and fabricated in our workshop. The crane is fabricated based on the most recent technological processes.
The crane, which moves on rails along the dock, consists of:
- A portal framework with rigid legs made of welded steel sheets, supported by equalizing trolleys that carry the wheels and the rolling mechanisms.
The framework will house the ballast required to prevent the crane itself from overturning.
- A middle column housing the ladder that provides access to the upper levels.
On the top of the column, a slew drive is placed, designed to bear the thrusts caused by the wind and the overturning moment of the slewing part.
- A rotating platform where the command cabin and the cabin housing the winches and the rotation mechanisms are positioned.
On the rear part of the platform itself, a counterweight is fitted to ensure that the slewing part of the crane is always balanced.
- A luffing boom consisting of a lattice truss, hinged to the rotating platform.
- A set of ladders and catwalks that provide access to the cabin and to the various mechanisms located outside the cabin.
|
|
The Mobile Harbour Crane was designed to be a multi-function hoisting means, fast and strong, capable of meeting any possible need in a simple and economic way.
Any movement of the crane is commanded from the control cabin.
The crane moves on steering wheel holders, half of which powered, which are transversally balanced and hydraulically bumpered so as to achieve a uniform distribution of the load over the two wheels.
N° 4 stabilizers, located at the ends of the trolley, are hydraulically operated by a jack housed in the structure of the stabilizer itself.
|
|
Marine Hoist is designed for handling sailboats, motor boats, pleasure boats and yachts with tall masts.
The design considers, although boats are bulky, that they are fragile at the same time especially with the mast up. To strike a mast is not only expensive but time consuming and somewhat precarious, and Paolo De Nicola for all these reasons offers a "C" shape hoist. This type of structure is open at one end permitting the yard to haul, dry dock and launch boats with their masts intact.
With the boat dry docked maintenance, fitting out and repairs can easily be carried out with a subsequent decrease in costs.
The "ELIDRA" has a main structure, translation and steering system, hoisting apparatus, engine and operator's cab.
|
|
Shipbuilding and yachting require specific handling systems.
CMR has developed a series of tyred cranes for boats haulage and handling 20-1.000 t capacity.
These machines also have additional features ranging from isostatic lifting systems for hulls to the ability to handle craft with particular structures such as hydrofoils, barges and catamarans.
|
|
|
Marine Travelift has been pioneering the boat handling industry for over 40 years. By constantly designing bigger and better machines with a growing set of standard features and options, we can say with confidence that Marine Travelift builds the best boat hoists in the world.
|
|
Photo: Boat-Hoist mod. ATS 250, 250 metric tonne capacity.
Our production includes a wide range of Standard and Amphibious Boat-Hoists, with a lifting capacity from 25 to 1000 Metric Tonne.
All models, are also available in the Amphibious configuration that don't need the docks-side, but travel on the existing slip-way in reinforced concrete directly, a fully load, with a slope from 8% up to 14%, the first of it working since 1982. This solution, permit you the save money in docks-side construction, save time because you can work the same day that you receive the machine, because you don’t need any bureaucratic authorizations.
Every Machine is standard equipped with; All Wheels Steering, Electronic Weighing System with LCD Displays, and Remote Radio Control System and Proportional Speed.
At the moment, a part the many Boat-Hoists in construction with capacity up to 300 M.T. we have to deliver;
- One Boat-Hoist of 450 M.T.
- One Boat-Hoist of 560 M.T.
- Two Boat-Hoists of 600 M.T.
- Two Boat-Hoists of 700 M.T.
- One Boat-Hoist of 820 M.T.
|
|
Slipmaster Range - Self Powered - Operates on 1:10 gradient (steeper gradients available)
Available with either True Vertical Lift or Pentagraph Lift
Longitudinal Sling Centre Adjustment
Individual control of all lift points
All functions failsafe
Stainless steel shafts, hydraulic couplings and pipework to 316 Marine Standard
Adjustable frame feature allows close parking of boats
Inside clear widths to suit customer requirements
Galvanised frame bolts and wheel centres.
Fast operating speeds both winching and transmission
|
|
A super flexible Sublift in a bigger model series
With the Sublift 90t it is possible to launch a boat in and out of the water with a weight of up to 90 tons. All the controls are on a hand held control box. On the display of the control box the weight distribution of the load is indicated.
The ability to control the hydraulic cylinders in pairs enables the operator to level the boat regardless of the inclination and tilt angles of the ground.
|
|
Photo: Boat-Hoist mod. BHT 160, 160 metric tonne capacity.
Our production includes a wide range of Standard and Amphibious Boat-Hoists, with a lifting capacity from 25 to 1000 Metric Tonne.
All models, are also available in the Amphibious configuration that don't need the docks-side, but travel on the existing slip-way in reinforced concrete directly, a fully load, with a slope from 8% up to 14%, the first of it working since 1982. This solution, permit you the save money in docks-side construction, save time because you can work the same day that you receive the machine, because you don’t need any bureaucratic authorizations.
Every Machine is standard equipped with; All Wheels Steering, Electronic Weighing System with LCD Displays, and Remote Radio Control System and Proportional Speed.
At the moment, a part the many Boat-Hoists in construction with capacity up to 300 M.T. we have to deliver;
- One Boat-Hoist of 450 M.T.
- One Boat-Hoist of 560 M.T.
- Two Boat-Hoists of 600 M.T.
- Two Boat-Hoists of 700 M.T.
- One Boat-Hoist of 820 M.T.
|
|
Photo: Boat-Hoist mod. BHT 350, 350 metric tonne capacity.
Our production includes a wide range of Standard and Amphibious Boat-Hoists, with a lifting capacity from 25 to 1000 Metric Tonne.
All models, are also available in the Amphibious configuration that don't need the docks-side, but travel on the existing slip-way in reinforced concrete directly, a fully load, with a slope from 8% up to 14%, the first of it working since 1982. This solution, permit you the save money in docks-side construction, save time because you can work the same day that you receive the machine, because you don’t need any bureaucratic authorizations.
Every Machine is standard equipped with; All Wheels Steering, Electronic Weighing System with LCD Displays, and Remote Radio Control System and Proportional Speed.
At the moment, a part the many Boat-Hoists in construction with capacity up to 300 M.T. we have to deliver;
- One Boat-Hoist of 450 M.T.
- One Boat-Hoist of 560 M.T.
- Two Boat-Hoists of 600 M.T.
- Two Boat-Hoists of 700 M.T.
- One Boat-Hoist of 820 M.T.
|
|
Photo: Boat-Hoist mod. BHT 700, 720 metric tonne capacity.
Our production includes a wide range of Standard and Amphibious Boat-Hoists, with a lifting capacity from 25 to 1000 Metric Tonne.
All models, are also available in the Amphibious configuration that don't need the docks-side, but travel on the existing slip-way in reinforced concrete directly, a fully load, with a slope from 8% up to 14%, the first of it working since 1982. This solution, permit you the save money in docks-side construction, save time because you can work the same day that you receive the machine, because you don’t need any bureaucratic authorizations.
Every Machine is standard equipped with; All Wheels Steering, Electronic Weighing System with LCD Displays, and Remote Radio Control System and Proportional Speed.
At the moment, a part the many Boat-Hoists in construction with capacity up to 300 M.T. we have to deliver;
- One Boat-Hoist of 450 M.T.
- One Boat-Hoist of 560 M.T.
- Two Boat-Hoists of 600 M.T.
- Two Boat-Hoists of 700 M.T.
- One Boat-Hoist of 820 M.T.
|
|
Photo: Boat-Hoist mod. BHT 100, 100 metric tonne capacity.
Our production includes a wide range of Standard and Amphibious Boat-Hoists, with a lifting capacity from 25 to 1000 Metric Tonne.
All models, are also available in the Amphibious configuration that don't need the docks-side, but travel on the existing slip-way in reinforced concrete directly, a fully load, with a slope from 8% up to 14%, the first of it working since 1982. This solution, permit you the save money in docks-side construction, save time because you can work the same day that you receive the machine, because you don’t need any bureaucratic authorizations.
Every Machine is standard equipped with; All Wheels Steering, Electronic Weighing System with LCD Displays, and Remote Radio Control System and Proportional Speed.
At the moment, a part the many Boat-Hoists in construction with capacity up to 300 M.T. we have to deliver;
- One Boat-Hoist of 450 M.T.
- One Boat-Hoist of 560 M.T.
- Two Boat-Hoists of 600 M.T.
- Two Boat-Hoists of 700 M.T.
- One Boat-Hoist of 820 M.T.
|
|
MOTOSCALO: the machine is destined to the movimentazione of heavy boats, to engine and to sail, for the towage and I launch on two docks to sea. Our production previews the construction of blots some with capacity from a minimum of 8 ton. to a maximum of 1000 ton., also in the AMPHIBIOUS VERSION.
They are moreover available, at call, all the completion accessories which, as an example, crane of service, crosspieces to "V" for sailing boats, steerings
details, arrange of weighing and cabins of commando.
COMMANDOS: the standard previews, beyond to a panel of emergency commandos, also a remote control with the possibility to control, in intuitivo way, the movements of the machine.
TRANSLATION: the machine has four carrying, simple wheels or gemellate, according to the several models. The hydraulic system of translation allows variations of continuous speeds and graduates them besides the sweetest and micrometric movements.
| | |
