|
|
|
A modular concept by half cradles for outside long time storage or for workshops use, a shoring up system simple, quick, sure and tested.
|
|
This platform for careenage PARKNET allows the shoring up and the stowing of boats in complete safety while leaving free acces to the careen for maintenance purpose
Carreenage becomes easy, quick and safe. Offering the possibility to limit water splashing, capture the washing effluents and treat them.
|
|
|
|
|
|
|
When it comes to superior manoeuvrability and efficient handling, there are no alternatives! Con-o-lift self-propelled marine hydraulic trailers deliver the ultimate in boat-handling convenience and performance.
Our exclusive 180 degree steering system provides unparalleled maneouvrability in tight quarters, allowing for increased vessel storage in yards where space is at a premium.
These trailers feature all the benefits of our standard yard trailers, including our clean, open-frame design concept, and hydraulic expanding-width frame, combined with our extended frame lift system for independent hydraulic height adjustment. Con-o-lift self-propelled trailers feature a full hydrostatic drive system, with dynamic braking and a multi wet-disk parking brake for added safety.
The operator's station with full engine instrumentation is mounted on the integral tractor unit at the front of the trailer. An optional hydraulic-operated raised platform can be added for greater clearance when the unit is used for launch and retrieval on ramps.
|
|
Remote controlled operation of all functions from operator-carried belly pack with back-up umbilical
Self-leveling, operator’s platform
Air bunks to carry boat @ approximately 10 psi (adjustable pressure)
Air cushioned fenders to center boat
Patented, articulating, center joint to launch boat in shallow tides
Hydro-static drive completely variable speed
Operates on boat ramp
Strap hooks mounted on the outside of the frame to carry small boats on the bunks
Steering axles turn a full 180 degrees with Tru-trac
|
|
|
|
|
|
|
The Hydrotrans RM-series is a 4 wheel steering, self powered and radio remote controlled transporter. This series of transporters will transport boats or other material on four-point cradles. The engine and hydraulic pumps can be placed at the side or the front of the transporter. The wheels are driven by hydraulic motors. The energy source and steering controls are all carefully and safely hidden in the motor compartment, this compartment is also isolated to reduce noise.
Built with High Grade S355 Steel, the RM-series is available from 20 tons and up.
Hydrotrans has been engineering and building boat and material handling equipment since 1996. A wide range of custom designs can also be provided to suit individual requirements.
All Hydrotrans equipment are built according to CE-regulations and tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Lease to purchase options are available.
Contact us for additional information or a free quotation.
|
|
|
|
|
|
|
The SW40 is designed to efficiently launch and recover both power and sailboats and fills a gap in a growing line of trailers from 20 tons to 300 tons.
Built wih High Grade S35 steel and adaptable to a variety of hull shapes and slipway conditions, the SW40 is an economical choice for boatyards who service a wide range of boats. The height of the pads in the lowest position are 930 mm. and in maximum height are 1930 mm. Extra extensions for sailboats add another 300 mm. The pads are nondestructible polyurethane and are extremely durable with an extended lifetime of use.
The telescopic drawbar, with a maximum length of 2000 mm is extendable with hydraulics. As with all Hydrotrans trailers, the hydraulic hoses are protected.
Wheels are solid 23 x 10-12. Pinions are made from Chromax to reduce wearing, and sit on brass bearings. Grease points are protected to avoid damage. In a feature unique to Hydrotrans, the operators valve block is one piece.
Hydrotrans has been engineering and building boat and material handling equipment since 1996. Standard models are the G2 (2 wheel steering) and G4 (4 wheel steering) transporters, the SW series for slipways, the RM series for remote control and the Aquaterra series of cranes. A wide range of custom designs can also be provided to suit individual requirements.
All Hydrotrans equipment is built according to CE-regulations and is tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment comes with a five year warranty
Lease to purchase options are available.
Contact us for additional information or a free quotation.
|
|
Adjustable inside clear width feature as standard
Allows the hoist to have a duplicate role of both recovery/launch and boat parking function
Stainless steel piping, hydraulic couplings and fittings to 316 Marine Standard
Stainless steel shafts throughout
Anti-flip hitch to prevent vertical jack-knifing
Can be supplied to suit a variety of towing vehicles
|
|
Our trolleys represent an innovation in the range of boat trailers, as a special steering and handling system is installed, controlled via PLC, that permits well 7 handling configurations: steering on all 4 wheel groups, steering on the front wheel groups, steering on the rear wheel groups, along a diagonal ("crab" steering), at 90° ±10°, all-round ("carousel").
The machine results to be extremely easy to drive, via the remote control, and particularly versatile.
Visit the website www.cimolaitechnology.com if you want to know more and keep up-dated!
|
|
Our trolleys represent an innovation in the range of boat trailers, as a special steering and handling system is installed, controlled via PLC, that permits well 7 handling configurations: steering on all 4 wheel groups, steering on the front wheel groups, steering on the rear wheel groups, along a diagonal ("crab" steering), at 90° ±10°, all-round ("carousel").
The machine results to be extremely easy to drive, via the remote control, and particularly versatile.
Visit the website www.cimolaitechnology.com if you want to know more and keep up-dated!
|
|
Our trolleys represent an innovation in the range of boat trailers, as a special steering and handling system is installed, controlled via PLC, that permits well 7 handling configurations: steering on all 4 wheel groups, steering on the front wheel groups, steering on the rear wheel groups, along a diagonal ("crab" steering), at 90° ±10°, all-round ("carousel").
The machine results to be extremely easy to drive, via the remote control, and particularly versatile.
Visit the website www.cimolaitechnology.com if you want to know more and keep up-dated!
|
|
Picture : Mobile Boat Trolley MBH 120 + Mobile Boat Hauler MBH 160
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
Wise Handling offer a range of products designed to enable the transportation of boats from the launch/retrieval area to the boat park.
Available in lift capacities from 10TN - 200TN
Full remote wireless control of all functions
Towed versions available
|
|
| ... products without information |
| |
|
|