|
|
| Fiberglass and Aluminum for all Flybridge, Express, Aft Cabin Boats and Motoryachts Custom made for you and your boat only, Every Atlantic Towers Custom Hardtop uses our ATL 4 extrusion for antenna mounts, radar mounts, and central wire run allowing concealment of antenna and equipment mounting bolts. |
|
Every Atlantic HiLine Tower is built around our exclusive ATL 8 (pat pending) extrusion system. This system allows the construction of completely finished hardtops which can be retrofitted to existing factory installed arches, or can be incorporated into complete one piece structures such as self-supporting hardtops or even tuna towers. HiLine hardtops feature powdercoating of the hardtop structure to match the inner and outer fiberglass surfaces, giving the appearance of a full molded top, but much lighter in weight.
|
|
Hand laid molded fiberglass top in wind deflecting design with powder coated aluminum reinforcing grid. Fiberglass white exterior, with choice of white or ivory interior. Choice of two hardtop sizes; 54%u201D x 70%u201D and 63%u201D x 84%u201D (add $100 for larger size) owners of boats in the 17%u2019 to 21%u2019 range will likely prefer the 54%u201D x 70%u201D top, although if you are a salt water spin caster or fly fisherman with a larger boat, the 54%u201D x 70%u201D will provide plenty of coverage and minimum interference with casting. The 63%u201D x 84%u201D has been installed on boats to 34%u2019 with 9%u2019 beam. This top is nearly 37 sq. feet and provides plenty of coverage for larger boats.
|
|
Fibre glass sunroof with or not glass inserts
|
|
Based on our unique ellipse extrusion, Scanstrut's Aluminium PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Available in a forward leaning profile for radome installations and an aft leaning profile for open-array installations.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts |
|
Offering a single "monocoque" structure for outstanding strength and surface finish, Scanstrut's Composite PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.
NEW design for 350mm version - even greater strength to suit all new generation radomes.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts |
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas |
|
Scanstrut's Stainless PowerTower® is designed to elevate your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Created using a highly polished stainless steel, this makes a great looking installation on any boat.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts |
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas |
|
Based on a unique ellipse extrusion, our new Satcom/tv PowerTower® is designed to raise your satcom antenna clear of obstructions, whilst minimising the footprint, allowing greater choice of antenna position.
> Options for all 30cm, 40cm and 60cm satcom/tv antennas.
> Hollow stem - cables routed neatly inside
> Antenna fastens to PowerTower® using antenna mounting |
|
| In 2004, we developed a canopy for boats with Wakeboard Towers. With an additional 60 inches of drop on the side curtain, this canopy will protect your boat from the sun and the rain. |
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas |
|
The JOLLY TOWER model JT01 it's the most versatile retractable unit of the range; it allows to install any type of electric sockets up to 125A.
Thanks to the loading resistance of the whole structure up to 40 tons the JT01 is particularly suitable for use in places transited by heavy vehicles ( HGV areas ).
The JOLLY TOWER JT01 is composed by a fixed structure of concrete RBK 300, by a mobile part of stainless steel that includes the top cover, the boxes for the equipment with protection degree IP66 and the lifting system.
Lifting and lowering of the structure are effected by a crank handle.
This pop up unit, with round or rectangular cover, it's available completely closed or to fill with any type of flooring for a perfect integration with the surrounding environment. |
|
| VEI's SEA PC Basic, Standard and 5000 XP computers that are available in waterproof, dustproof, shockproof and completely sealed configurations. VEI is well known as the worldwide leader in custom marine computers for any and every application. Speak to your VEI specialist today to find out which of these would best suit your needs. |
|
|
|
