|
|
Electronic compact remote control Marex SB
The remote control acts upon the main engines, gearboxes and couplings. The system is available for fixed pitch propellers with reversing gearbox as well as for controllable pitch propellers or waterjets.
The flexible selection of governing signals for engine and gearbox allows you to use the system for nearly every kind of engine or gearbox.
The Marex SB offers easy configuration via DIP-switches and safe communication via CAN-bus. The Marex SB is available for single and twin engine applications. We offer you a control head in the same design as our open system Marex OSII.
You can easily install this remote control according to the manual on your own or take advantage of our worldwide service. We have a vast dealer network that can support you with new projects as well as repairs and spare parts. So take advantage of our long-term experience in remote controls.
|
|
Electronic Remote control Marex OSII for shaft-line systems
The remote control works on the main engines, gear boxes and clutch. The system is available for fixed pitch propeller with reversing gear and trolling module as well as for controllable pitch propeller systems.
The modular system allows to use the remote control with any kind of diesel, diesel-electric or electric main engine as well as gear box types.
Make your choice in a wide selection of control handles, operating and indication modules.
We will adapt the system to your needs and deliver a pre-configured system. We also offer setting up of the system, commissioning and a world-wide after sales service through our broad office and partner network.
|
|
LF180 is a control lever for propulsion machinery, one or two engines. The unit is equipped with pot-meter as required (single or double design). The lever is designed for electronic control.
Technical descrition:
- Side covers: Black coated aluminium
- Shaft: Flat finished stainless steel
- Handle: Flat finished POM (spastic material)
- Scale: Self adhesive on acryl bow
- Standard pot-meter: 5K
- Pot-meter operation: Tooth belt
Options:
- Spring loaded return to neutral position
- Built-in switches
- Panel plate 144x220 mm, enclouse according to IP66
- Terminering
|
|
LF120 is a control lever designed for single or double operation of propulsion machinery, bow or stern thruster etc. The unit is designed for electronic control and is equipped with pot-meters as required. LF120 is robust and reliable, and some larger than LF90.
Technical description:
- Side covers: Black coated aluminium
- Shaft: Flat finished stainless steel
- Handle: Flat finished POM (special plastic material)
- Scale: Self adhesive on acrylic bow
- Scale light: 24 volts
- Standard pot-meter: 5 K
- Pot-meter operation: Tooth belt
Options:
- Spring-loaded return to neutral position
- Built-in switches
- Panel plate 96x144 mm, enclosure according IP66
- Colour
- Motorised axes
- A range of different scale foils.
- Custom design (scale, panel plate, pot-meter, shafts and handles)
|
|
|
|
|
|
|
The AutoChief® C20 propulsion control system is designed for medium and low speed diesel engines fitted with fixed or variable pitch propellers. It is based on knowledge gained through more than 40 years of working with the main engine manufacturers. The technology used, builds on our highly successful K-Chief 500 marine automation system.
Propulsion control system components:
Control panel
Engine telegraph unit
Engine safety system
Digital governor system
Engine order printer
Distributed processing units
Customer benefits
Reliable operation
Bumpless control transfer
Immediate transfer of all data
Quick adoption to various engines - no software customisation required
Distributed Processing Units (DPU) designed for direct mounting on engines
Reduced cabling cost. All signals are connected to DPU's directly on the main engine, simplifying installation in the control consoles
Can be integrated with the K-Chief 500 machinery automation system, sharing sensors and information
Few moving parts to reduce maintenance requirements
Approved by all the main classification societies
|
|
LF120 is a control lever designed for single or double operation of propulsion machinery, bow or stern thruster etc. The unit is designed for electronic control and is equipped with pot-meters as required. LF120 is robust and reliable, and some larger than LF90.
Technical description:
- Side covers: Black coated aluminium
- Shaft: Flat finished stainless steel
- Handle: Flat finished POM (special plastic material)
- Scale: Self adhesive on acrylic bow
- Scale light: 24 volts
- Standard pot-meter: 5 K
- Pot-meter operation: Tooth belt
Options:
- Spring-loaded return to neutral position
- Built-in switches
- Termination
- Panel plate 96x144 mm, enclosure according IP66
- Colour
- Motorised axes
- Custom design (scale, panel plate, pot-meter, shafts and handles)
|
|
LF90 is a control lever designed for single or double operation of propulsion machinery, bow or stern thruster etc. The unit is designed for electronic control and is equipped with pot-meters as required. LF90 is small, robust and reliable.
Technical description:
- Side covers: Black coated aluminium
- Shaft: Flat finished stainless steel
- Handle: Flat finished POM (plastic material)
- Scale: Self adhesive on acrylic bow
- Scale light: 24 volts
- Standard pot-meter: 5 K
- Pot-meter operation: Tooth belt
Options:
- Spring loaded return to neutral position
- Built-in switches
- Termination
- Panel plate 96x96 mm, enclosure according to IP66
- Colour
- Motorised axes
- A range of different scale foils
- Custom design (scale, panel plate, pot-meter, shafts and handles)
|
|
Meets all ABS, Lloyds and DnV Transfer Requirements
Meets Second Tier Environmental Testing requirements for ABS DPS Notation
Rugged Black Powder Coated Cast Aluminum Throttle Handles
Surface Mounted Electronic Components for vibration resistance
Designed for easy troubleshooting using LED status indicators on the
motherboard
Designed for easy calibration
|
|
| ... products without information |
| |
|
|
|
|
|
Bob's Machine Shop has just launched a new line of jack plates for smaller boats with lower-hp engines. The lightweight Mini Jacs feature a smaller footprint and, depending on the model, will handle engines up to 50 hp.
High-performance boaters use jack plates for more speed, better fuel economy and improved boat handling. In recent years, jacks have also become popular with fishermen and pleasure boaters who operate in shallow water.
Mini Jacs come in three models: The standard version weighs 28 pounds and has same dimensions as BMS's regular jack plates. It fits the standard BIA bolt pattern and provides 6" of hydraulic lift.
Mini Jacs also come in a narrower width for smaller boats with clamp-on style motors. This model weighs 25 pounds but still provides 6" of lift.
The smallest Mini Jac weighs only 18 pounds and works well with small, Gheenoe-style boats with clamp-on engines. This model supplies 4" of hydraulic lift and handles engines up to 40 hp. All Mini Jacs come with a 5-1/2" setback.
Bob's Machine Shop's jack plates use hi-tech bearings that will not absorb water. They also feature automobile-type grease fittings - a unique feature among jack plates. All BMS hydraulic pumps are mounted inside the boat to lower the overall weight on the transom and minimize exposure, especially in saltwater.
The Mini Jacs come with a lifetime warranty.
|
|
Bob's Machine Shop standard line of jack plates. 4, 6, 8, 10 and 12 inch setbacks. All offering a minimum of 7.5 inches of lift above the standard mounting position. Rated for a Max of 300 HP, V6 engines, the standard Jac plate line is able to handle almost every outboard.
Jack Plates allow access to shallow water, increase the speed of the boat, increase fuel economy, and increase acceleration. By setting the engine back further, you are putting your propeller into cleaner water, increasing prop bite. Also the water uncompresses from under the transom, allowing you to raise the motor and reduce drag (increasing speed)
|
|
Extreme series Jack Plates from Bob's Machine Shop are made to handle 350HP engines including V8's. Also great for offshore and race applications.
Allows access to shallow water, increases boat performance and increases fuel economy.
|
|
|
Bob's Machine Shop jack plate. Manual adjustments made with wrench. Cheaper than hydraulic, but offers same look as Bob's high quality hydraulic jack plate. Versa jacs can be upgraded to hydraulic at a later date with Bob's Versa Change Over kit.
|
|
|
|
|
|
|
Engineers at Bob's Machine Shop have developed a product that all boaters can use.
With a maximum engine rating of 40 hp, BMS's hydraulic kicker jackplate provides slow-speed power for cruisers, auxiliary power for sailboats and trolling power for fishermen.
Sailboat skippers will appreciate the jackplate's ability to reduce engine drag while under sail.
For economy, powerboaters can fire up their kicker for no-wake zones, slow cruising or when navigating shallow backwaters. And, the jack provides anglers with the option of using just one motor for trolling and main power.
The kicker jack is built with 6061 T-6 aircraft-grade aluminum to ensure high strength with minimal weight. All of Bob's Machine's hydraulic jackplate motors are mounted inside the boat for long life and easy maintenance.
An optional wireless control kit allows the skipper to operate the jackplate remotely with a small key fob from anywhere on the boat.
Retail price of Bob Machine Shop's patent pending, hydraulic kicker jackplate is $1,199. It comes with a limited lifetime warranty on the structure.
|
|
Available in 8 inch Setback Jackplate #MJ8 and Heavy duty 5 inch Jackplate #MJ5
Also available for extreme conditions such as offshore racing #MJH.
Manual Jack
Overall Width= 17 7/8" - Overall Height= 14" - Weight= 19 lbs.
|
|
| ... products without information |
| |
Over Thirty years of innovation have made Racor the most trusted name in engine protection. Racor’s advanced technology offers fuel, oil, engine-air, water, transmission, crankcase ventilation and hydraulic filtration solutions at every flow rate, in any application. Coolant system products and specially-formulated additives complete the Racor product offering.
|
|
|
Genuine Tohatsu Engine Oil is speciaiiy formulated to work with all Tohatsu engines, 2-stroke, TLDI and 4-stroke .Tohatsu Genuine Oils contain additional additives and detergents to keep your Tohatsu outboard tunning at peak perfomance.
|
|
Who it's for:
People who want an outstanding conventional motor oil that can help them Feel The Clean.
What it does:
Provides a unique combination of protection, responsiveness and cleansing action.
|
|
Who it's for:
People who want the highest level of cleaning, protection and performance that the maker of America's #1 passenger car motor oil provides -- our ultimate clean.
What it does:
Superior* Active Cleansing Agents go beyond cleansing the oil to continuously attack potential and existing deposits. In a severe sludging test, Pennzoil Platinum® removed almost half the dirt and deposits in a dirtied engine in just one oil change.
|
|
Reservoir breather filters provide precision hydraulic components with special protection against wear particles and destructive moisture. The use of reservoir breather filters is especially critical in high humidity areas or where moisture is present near hydraulic systems. Racor reservoir breathers contain a unique filter media which removes both dirt and moisture. The spin-on design provides ease of service. Consult factory for details.
|
|
Being on the water is fun, having water in your fuel is not. And more than ever today's high performance gasoline inboard and outboard engines require clean, dry fuel. Standard spin-on filters simply don't offer the improved features and peace-of-mind that come with quality Racor fuel filter/water separators.
Clear contaminant collection bowl with drain valve for outboards
Ten micron Aquabloc media
Long life with 98% efficiency
Corrosion-resistant construction
Metal bowl units inboard powered boats meet 33 CFR and USCG standards
Meets ABYC standard H-23
|
|
A monitoring system which combines high performance and economy can be equipped with up to 4 CRTS, and it is also equipped with graphic display functions.
Information communication can be processed through built in personal computer.
The monitor system, which adopts a continuous supervisory method that corresponds one to one with measuring point, assures a highly reliable system construction.
The monitor system is constructed with plug-in type modules that allow the direct reading of measured values and setting values. The module unit construction also enables maintenance work to be easier.
|
|
Custom Designed for specific applications - large or small
Ruggedized to meet harsh marine environments
3D Views provided for approval prior to final fabrication
EMI provides complete integration of all installed components - EMI or Third Party provided
Full "Turnkey" vendor for consoles from design to installation onboard your vessel
|
|
|
Dissolves oil, grease, gasoline, diesel fuel and sludge . Easy to use - just pour in, run boat and drain . Biodegradable, environmentally friendly formula . Leaves bilge smelling clean and fresh . Eliminates source of explosive fumes
|
|
| ... products without information |
| |
| ... products without information |
| |
|
|
see the results for the following category : 
