|
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of one or more independent boat batteries in the form of light and use the EL Electroluminescence Lighting for boats technology for his serigraphy back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm for boats when it is activated.
Large scale bright with 16 LEDs between 9,5V to 15,2V and 19V to 30,4V for the 24V versions. The distribution of LEDs provides an accurate indication of the battery's state.
Display of EL on serigraphy can be command separately (with the navigation boat lights, for example).
1, 2 or 3 buttons allow the display selection of the battery to be viewed.
An audible alarm is integrated and bright / triggered by the low voltage level or the high voltage in each battery bank connected.
The modus operandi of the device can be defined depending of the use: permanent mode, timed or on/off mode.
The domestic consumption of the unit is extremely low running even with the EL and even more in sleep mode. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
The front panel for boat is waterproof and the electronic components are drowned in the resin. |
|
NAVYLEC MARINE BATTERY MONITOR NL208-12X
Precision LEDs voltmeter’s for 12V boat batteries with alarm and relay
(size B2 W.80 x H.80mm)
For 1, 2 or 3 12V batteries
Batteries monitored simultaneously
Audible, light and relay alarms for boats
Instant visualization
Direct interpretation of the measure
Measurement accuracy of 10mV
LEDs voltmeter compact 80x80mm
Very low consumption
The high-end LEDs voltmeter NAVYLEC NL208-12X can measure the voltage of one or more independent batteries in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay alarms when it is activated.
• Scale bright with 9 LEDs between 9,5 and 15,2V. The distribution of LEDs provides an accurate indication of the battery’s state.
• A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
• Instant reading of the measure on the LEDs.
• Models 2 and 3 batteries can instantly give the read on the status of each battery connected.
• An Audible alarm, visual and by relay is integrated. It activates, turns off or stopped by the push button.
• The domestic consumption of the unit is extremely low running. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
• The front panel for boat is waterproof and the electronic components are drowned in the resin.
Its small size (80x80mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures : main battery bank, engine for boat, bow thrusters, electronic, auxiliary, etc |
|
The high-end voltmeter with LCD display NAVYLEC can measure the voltage of one or more independent boat batteries in the form of light and use the EL Electroluminescent lighting for boats technology for his serigraphy and the LCD display back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm for boats when it is activated.
LCD precision voltmeter's with electroluminescent back lighting
12 or 24V
Running on circuits 12V or 24V without adjustment to do.
Electroluminescent EL lighting of the serigraphy and LCD display.
The LCD boat screen display makes reading instant of the battery voltage measured on four-digit.
Display of EL on serigraphy can be command separately (with the navigation boat lights, for example).
1, 2 or 3 buttons allow the display selection of the battery to be viewed.
An audible alarm is integrated and bright / triggered by the low voltage level or the high voltage in each battery bank connected.
The functioning mode of the device can be defined depending of the use: permanent mode, timed or on/off mode.
The domestic consumption of the unit is extremely low running even with the electroluminescence EL and even more in sleep mode. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
The front panel for boat is well protected and the electronic components are drowned in the resin. |
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of one or more independent boat batteries in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay boat alarms when it is activated.
LEDs precision voltmeter's
for 12V battery
(available in 24V: NL218-001)
(size B0 W.60 x H.60mm)
Voltmeter for a 12V battery
Permanent LED display
Measurement accuracy of 10mV
Compact, easy to instal
High reliability
Very low consumption
This entry-range voltmeter from the trademark NAVYLEC has all from one great and it let know instantly the battery voltage when the battery is at rest, during recharging or discharging operations.
6 LEDs boat lights are between 11,95 and 15,2V. They are distributed specially to provide an indication of the state of the battery.
A specific marker (alternator) can be used to check the proper functioning of the devices.
The domestic consumption of the unit is extremely low (1,4mA/h !). It allows the monitor to remain in continuous operation.
The front panel for boat is water proof and the electronic components are drowned in the resine
Its small size (60x60mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures: main battery bank, engine for boat, bow thrusters, electronic, auxiliary, etc. |
|
Get a clear vision of your power with the Sinergex Vision6 battery monitoring system. At the touch of a button the Vision6 gives valuable information about your DC system like percentage of charge remaining, charge and efficiency rates, power consumption and amp hours remaining. The Vision6 uses advance software including Peukerts Exponent giving extremely accurate information. All information is easily read on the high-resolution dot matrix LCD marine screen.
The Vison6 is so simple to use, that at the touch of a button you can access all the information instantly. Its unique and style design allow the Vision6 to be surface or recessed mounted in any location. |
|
| The new EOS® controller for boats is easily installable into existing circuit thanks to a wiring connection RS485 or wireless protocol (available on demand) and can be interfaced with integrated electronic management systems. |
|
| ... products without information |
| |
The TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM200.
The TLA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the TLA100 can be calibrated for any resistance between 0 and 300 ohms.
Unlike most tank senders that only work with rectangular marine tanks, the TLA100 can be calibrated for irregular tank shapes so you know the true level of the tanks. You can also use the TLA100 with analog gauges so you don't have to get rid of existing gauges to enjoy the advantages of digitally networked information.
|
|
| SENTRY is a cargo tank for boats pressure monitoring system designed in compliance with IMO Regulation 59, providing early warning of under/over pressurisation in tankships. MMS200 intrinsically safe 316SS absolute pressure transducers continually monitor tank pressure and offer excellent durability and long-term stability. The extremely compact M3000 control and alarm system provides indication of the measured pressure in each tank, and generates audio and visual marine alarms. |
|
DSM250 - NMEA 2000® Multi-function Color Display
Maretron's DSM250 is a high-resolution sunlight viewable color display that allows easy interpretation of NMEA 2000® instrument and navigation data through custom display configurations, featuring an easy-to-use five-key illuminated keypad.
Unlike traditional single-display units, DSM250 users can choose numeric, gauge, or graph formats in single or multiple displays, with cycling options possible for a wide range of favorite data. These multiple display options conserve mounting space and reduce overall system cost.
The DSM250 will directly connect with any NMEA 2000® network and display any or all information captured throughout the vessel. Various audio and visual marine alarms are also programmable.
The DSM250 displays a multitude of information including AC power, battery for boat, depth, engine for boats, environment, fuel management, BOAT GPS, heading, navigation, rudder, speed, marine tanks, time, transmission, weather, wind and more.
Maretron's DSM250 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radiocommunication Marine equipment). Its compact waterproof housing will provide years of reliable performance.
The DSM250 is available in three different color cases for boats: black, gray, or white.
|
|
Maretron's DSM200 is a high-resolution monochrome display that allows easy interpretation of NMEA 2000® instrument and navigation data through custom display configurations, featuring an easy-to-use five-key illuminated keypad.
Unlike traditional single-display units, DSM200 users can choose numeric, gauge, or graph formats in single or multiple displays, with cycling options possible for a wide range of favorite data. These multiple display options conserve mounting space and reduce overall system cost.
The DSM200 will directly connect with any NMEA 2000® network and display any or all information captured throughout the vessel. Various audio and visual marine alarms are also programmable.
The DSM200 displays a multitude of information including autopilot, battery for boat, compass, depth, engine for boats data, BOAT GPS, rudder indication, speed, tank for boats monitor, weather, wind and more.
Maretron's DSM200 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radiocommunication Equipment for boats). Its compact waterproof housing will provide years of reliable performance.
|
|
"New instrument for monitoring all im-portant navigation data. Provides an ex-tensive range of data making navigation easier and safer. A simple menu allows you to see data presented in a varity of ways. Easily customized to suit for boat your re-quirements, e.g. analogue or digital dis-play, 8 different languages or different types of units.
The multi display gives you all the infor-mation you need about boat, wind or speed over ground, water temperature, wind speed, battery status, compass, position, bearing. In analogue or digital mode.
Just press a button to retrieve the data you want to see. Sub-menus will guide you to the information of your choice and the variety of ways to display the information.
You decide how you want your information presented.You can combine the information accor-ding to your own choice in marine blocks of 2 or 4 items of data on the same marine screen."
|
|
| ... products without information |
| |
The TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM200.
The TLA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the TLA100 can be calibrated for any resistance between 0 and 300 ohms.
Unlike most tank senders that only work with rectangular marine tanks, the TLA100 can be calibrated for irregular tank shapes so you know the true level of the tanks. You can also use the TLA100 with analog gauges so you don't have to get rid of existing gauges to enjoy the advantages of digitally networked information.
|
|
| SENTRY is a cargo tank for boats pressure monitoring system designed in compliance with IMO Regulation 59, providing early warning of under/over pressurisation in tankships. MMS200 intrinsically safe 316SS absolute pressure transducers continually monitor tank pressure and offer excellent durability and long-term stability. The extremely compact M3000 control and alarm system provides indication of the measured pressure in each tank, and generates audio and visual marine alarms. |
|
control-column
control-column The On deck controllers based on a solid control-column from Spohn & Burkhardt are seawater resistant controllers for the use on marine ships. Sailboat anchor boat winches and bow thrusters are steered by on deck controllers. |
|
control-column
control-column The On deck controllers based on a solid control-column from Spohn & Burkhardt are seawater resistant controllers for the use on marine ships. Anchor for boats winches for boats and bow thrusters are steered by on deck controllers. |
|
|
|
see the results for the following category
