|
|
NAVYLEC BATTERY MONITOR NL208-12X
Precision LEDs voltmeter’s for 12V batteries with alarm and relay
(size B2 W.80 x H.80mm)
For 1, 2 or 3 12V batteries
Batteries monitored simultaneously
Audible, light and relay alarms
Instant visualization
Direct interpretation of the measure
Measurement accuracy of 10mV
LEDs voltmeter compact 80x80mm
Very low consumption
The high-end LEDs voltmeter NAVYLEC NL208-12X can measure the voltage of one or more independent batteries in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay alarms when it is activated.
• Scale bright with 9 LEDs between 9,5 and 15,2V. The distribution of LEDs provides an accurate indication of the battery’s state.
• A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
• Instant reading of the measure on the LEDs.
• Models 2 and 3 batteries can instantly give the read on the status of each battery connected.
• An Audible alarm, visual and by relay is integrated. It activates, turns off or stopped by the push button.
• The domestic consumption of the unit is extremely low running. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
• The front panel is waterproof and the electronic components are drowned in the resin.
Its small size (80x80mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures : main battery bank, engine, bow thrusters, electronic, auxiliary, etc
|
|
The NL208-02X Battery Monitor is a LEDs voltmeter to measure the voltage from one or more independent batteries in the form of light.
%u2022 Scale bright with 9 LEDs between 9,5 and 15,2V.
%u2022 A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
%u2022 Instant reading of the measure on the LEDs.
%u2022 Models 2 and 3 batteries can instantly give the read on the status of each battery connected.
%u2022 The domestic consumption of the unit is extremely low running
%u2022 The front panel is waterproof and the electronic components are drowned in the resin.
Its small size (80x80mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures: main battery bank, engine, bow thrusters, electronic, auxiliary, etc.
|
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of one or more independent batteries in the form of light and use the EL Electroluminescence Lighting technology for his serigraphy back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm when it is activated.
Large scale bright with 16 LEDs between 9,5V to 15,2V and 19V to 30,4V for the 24V versions. The distribution of LEDs provides an accurate indication of the battery's state.
Display of EL on serigraphy can be command separately (with the navigation lights, for example).
1, 2 or 3 buttons allow the display selection of the battery to be viewed.
An audible alarm is integrated and bright / triggered by the low voltage level or the high voltage in each battery bank connected.
The modus operandi of the device can be defined depending of the use: permanent mode, timed or on/off mode.
The domestic consumption of the unit is extremely low running even with the EL and even more in sleep mode. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
The front panel is waterproof and the electronic components are drowned in the resin.
|
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of one or more independent batteries in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay alarms when it is activated.
LEDs precision voltmeter's
for 12V battery
(available in 24V: NL218-001)
(size B0 W.60 x H.60mm)
Voltmeter for a 12V battery
Permanent LED display
Measurement accuracy of 10mV
Compact, easy to instal
High reliability
Very low consumption
This entry-range voltmeter from the trademark NAVYLEC has all from one great and it let know instantly the battery voltage when the battery is at rest, during recharging or discharging operations.
6 LEDs lights are between 11,95 and 15,2V. They are distributed specially to provide an indication of the state of the battery.
A specific marker (alternator) can be used to check the proper functioning of the devices.
The domestic consumption of the unit is extremely low (1,4mA/h !). It allows the monitor to remain in continuous operation.
The front panel is water proof and the electronic components are drowned in the resine
Its small size (60x60mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures: main battery bank, engine, bow thrusters, electronic, auxiliary, etc.
|
|
The high-end voltmeter with LCD display NAVYLEC can measure the voltage of one or more independent batteries in the form of light and use the EL Electroluminescent lighting technology for his serigraphy and the LCD display back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm when it is activated.
LCD precision voltmeter's with electroluminescent back lighting
12 or 24V
Running on circuits 12V or 24V without adjustment to do.
Electroluminescent EL lighting of the serigraphy and LCD display.
The LCD screen display makes reading instant of the battery voltage measured on four-digit.
Display of EL on serigraphy can be command separately (with the navigation lights, for example).
1, 2 or 3 buttons allow the display selection of the battery to be viewed.
An audible alarm is integrated and bright / triggered by the low voltage level or the high voltage in each battery bank connected.
The functioning mode of the device can be defined depending of the use: permanent mode, timed or on/off mode.
The domestic consumption of the unit is extremely low running even with the electroluminescence EL and even more in sleep mode. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
The front panel is well protected and the electronic components are drowned in the resin.
|
|
| RDS remote control panels allow you to monitor the status of SBC ADVANCED PLUS battery chargers by means of a CAN BUS interface (RDS 1530 escluded). |
|
The VISION 4 Battery Supervisor is the last word in on board power supervision.
It is simple to connect and it automatically detects the input voltage (12 VDC or 24 VDC). CanBus SAE J1939 interface.
The VISION 4 battery monitor analyses battery voltage, battery efficiency, temperature and capacity on 2 battery banks (by means of an optional second shunt) also the voltage on 2 additional banks.
The VISION 4 includes a digital filter which allows it to avoid problems arising from motor start up, fuse faults, unballasting, etc...
The VISION 4 has a non volatile memory which allows it to retain configuration parameters even if there is no power source.
The VISION 4 has powerful calculating algorithms which take count of the currant draw, the charge status and the type of battery, so it can supply precise indication of the remaining charge. This means that the VISION 4 is more than just a simple Ah counter. In fact, its energy counter takes into consideration:
-During the charge, output that diminishes according to the battery's charge.
-During the discharge, restored capacity which diminishes according to the draw.
What's more, the VISION 4 is not sensitive to the effects of the charging cycle because it automatically detects float mode. It is thus not subject to drifting with each successive charge / discharge cycle. |
|
Get a clear vision of your power with the Sinergex Vision6 battery monitoring system. At the touch of a button the Vision6 gives valuable information about your DC system like percentage of charge remaining, charge and efficiency rates, power consumption and amp hours remaining. The Vision6 uses advance software including Peukerts Exponent giving extremely accurate information. All information is easily read on the high-resolution dot matrix LCD screen.
The Vison6 is so simple to use, that at the touch of a button you can access all the information instantly. Its unique and style design allow the Vision6 to be surface or recessed mounted in any location. |
|
| The new EOS® controller is easily installable into existing circuit thanks to a wiring connection RS485 or wireless protocol (available on demand) and can be interfaced with integrated electronic management systems. |
|
| ... products without information |
| |
| ... products without information |
| |
| ... products without information |
| |
|
|
see the results for the following category
