|
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of two independent batteries in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay alarms when it is activated.
|
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of one battery in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay alarms when it is activated.
|
|
|
|
|
|
|
NAVYLEC BATTERY MONITOR NL208-12X
Precision LEDs voltmeter’s for 12V batteries with alarm and relay
(size B2 W.80 x H.80mm)
For 1, 2 or 3 12V batteries
Batteries monitored simultaneously
Audible, light and relay alarms
Instant visualization
Direct interpretation of the measure
Measurement accuracy of 10mV
LEDs voltmeter compact 80x80mm
Very low consumption
The high-end LEDs voltmeter NAVYLEC NL208-12X can measure the voltage of one or more independent batteries in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay alarms when it is activated.
• Scale bright with 9 LEDs between 9,5 and 15,2V. The distribution of LEDs provides an accurate indication of the battery’s state.
• A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
• Instant reading of the measure on the LEDs.
• Models 2 and 3 batteries can instantly give the read on the status of each battery connected.
• An Audible alarm, visual and by relay is integrated. It activates, turns off or stopped by the push button.
• The domestic consumption of the unit is extremely low running. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
• The front panel is waterproof and the electronic components are drowned in the resin.
Its small size (80x80mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures : main battery bank, engine, bow thrusters, electronic, auxiliary, etc
|
|
|
|
|
|
|
The high-end voltmeter with LCD display NAVYLEC can measure the voltage of one or more independent batteries in the form of light and use the EL Electroluminescent lighting technology for his serigraphy and the LCD display back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm when it is activated.
LCD precision voltmeter's with electroluminescent back lighting
12 or 24V
Running on circuits 12V or 24V without adjustment to do.
Electroluminescent EL lighting of the serigraphy and LCD display.
The LCD screen display makes reading instant of the battery voltage measured on four-digit.
Display of EL on serigraphy can be command separately (with the navigation lights, for example).
1, 2 or 3 buttons allow the display selection of the battery to be viewed.
An audible alarm is integrated and bright / triggered by the low voltage level or the high voltage in each battery bank connected.
The functioning mode of the device can be defined depending of the use: permanent mode, timed or on/off mode.
The domestic consumption of the unit is extremely low running even with the electroluminescence EL and even more in sleep mode. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
The front panel is well protected and the electronic components are drowned in the resin.
|
|
|
|
|
|
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of one or more independent batteries in the form of light and use the EL Electroluminescence Lighting technology for his serigraphy back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm when it is activated.
Large scale bright with 16 LEDs between 9,5V to 15,2V and 19V to 30,4V for the 24V versions. The distribution of LEDs provides an accurate indication of the battery's state.
Display of EL on serigraphy can be command separately (with the navigation lights, for example).
1, 2 or 3 buttons allow the display selection of the battery to be viewed.
An audible alarm is integrated and bright / triggered by the low voltage level or the high voltage in each battery bank connected.
The modus operandi of the device can be defined depending of the use: permanent mode, timed or on/off mode.
The domestic consumption of the unit is extremely low running even with the EL and even more in sleep mode. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
The front panel is waterproof and the electronic components are drowned in the resin.
|
|
|
The new EOS® controller is easily installable into existing circuit thanks to a wiring connection RS485 or wireless protocol (available on demand) and can be interfaced with integrated electronic management systems.
|
|
|
|
|
|
|
SOL 5.6/8.8
This latest generation of charge regulators sets high standards in the solar industry. Specialized integrated circuits enable new control features.
The solar charge regulator is more than protection device for the solar battery. The over charge protection works as a pulse width modulated shunt regulator and ensures optimal battery charging. The regulator is equipped with wear resistant MOSFET transistors, thus ensuring a long working life.
Completely new to this price class are the cyclic charging, boost charging and temperature compensation features. The regulator is also equipped with a multi-colour LEDs showing voltage levels.
Sol 5
This charge regulator is comparably adapted for lead and NiCd storage batteries. Because storage batteries generally shouldn´t charge discretionary long without charging current limit or charge regulator, this regulator offers an optimal control of charging. Applicative for systems of max. 80 watt generator power and 12-14 volt DC battery voltage.
|
|
The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60.
|
|
You’re out on the water kicking back, listening to your favorite tunes, while enjoying family and friends. You wish it could never end. Then when it’s time to head in you realize, the battery is drained and you’re stuck. Don’t let this
happen to you. A dead battery can be a real hassle and worse, this could turn into a dangerous situation.
|
|
|
|
|
|
|
BM-1 Battery Monitor
The BM-1 is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 650 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the batteries state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure.
Specifications
Supply voltage
8 - 16 Volts DC
Supply current 3 milliamps
Battery capacities 5 - 650 AMP Hour
Load current 100 AMPS Maximum
Charge current 100 AMPS Maximum
Shunt Standard 50 millivolt @ 100 AMP
Cables supplied:
100 AMP shunt link to M8 Ring terminal.
5 Metre from display unit to battery - fused and fitted with ring terminals for shunt, fuse holder and M8 ring terminal to battery.
Display unit
Standard 110mm square Clipper case. High contrast LCD, backlit for night viewing.
Minimum voltage visual alarm
Simple operation - 4 keys to select backlight, Volt/Amp/State of Charge screen,
AMP hours or Time to run.
|
|
|
|
|
|
|
NEW - Compact battery monitor, just 124 x 62mm x 23mm!
Based on the highly successful BM-1 marine battery monitor, the BM-1 Compact is especially designed for applications where space is at a premium.
Caravans, mobile homes, RV's, small boats and renewable power installations can all benefit from the BM-1 Compact. It is able to monitor the performance of any 12 Volt lead acid battery system with a capacity up to 600 AmpHours. The BM-1 Compact is supplied with a precision 100 Amp shunt and prefabricated cables to enable simple DIY installation.
The unit continually monitors the voltage, the current (charge or discharge) and calculates the state of charge together with the time remaining to charge or discharge the battery.
This information can lead to a more efficient use of the battery enhancing its life and reducing the risk of failure.
Operation is very simple. One screen displays the voltage, current (charge or discharge) and a bar graph showing the remaining capacity. A flashing alarm is also included to warn if the capacity is getting too low. A second screen shows the remaining time available at the current charge/discharge rate together with the remaining capacity in both analog and digital format.
The BM1 Compact consumes a miserly 1.5mA!
|
|
|
To avoid overcharging your battery. Perfect match for solar panels generating up to 10A of current. Charging 12V battery systems. Intelligent PWM charge control ensures batteries reach max capacity. Built-in LED indicator instantly displays charging status
|
|
|
To avoid overcharging your battery. Perfect match for solar panels generating up to 20A of current. Charging 12V battery systems. Integrated display gives you information on the battery status
|
|
| ... products without information |
| |
|
|
|
|
|
SOL 5.6/8.8
This latest generation of charge regulators sets high standards in the solar industry. Specialized integrated circuits enable new control features.
The solar charge regulator is more than protection device for the solar battery. The over charge protection works as a pulse width modulated shunt regulator and ensures optimal battery charging. The regulator is equipped with wear resistant MOSFET transistors, thus ensuring a long working life.
Completely new to this price class are the cyclic charging, boost charging and temperature compensation features. The regulator is also equipped with a multi-colour LEDs showing voltage levels.
Sol 5
This charge regulator is comparably adapted for lead and NiCd storage batteries. Because storage batteries generally shouldn´t charge discretionary long without charging current limit or charge regulator, this regulator offers an optimal control of charging. Applicative for systems of max. 80 watt generator power and 12-14 volt DC battery voltage.
|
|
The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60.
|
|
| ... products without information |
| |
|
Johnson Pump switch panel gives you full control over your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic switch AS888. The three-position switch panel in matt black finish has an integrated fuse holder and operating light. Fuses included.
|
|
|
The BSW 1000 by Smartswitch has been designed to counter the design failings of bilge switches of yesterday. Short life span and unreliability caused by switches continuously burning-out was almost ‘par for the course’. NOT ANYMORE. Easy to install and easy to operate, the BSW 1000 offers today’s mariner a reliable alternative to the old technology still on the market today.
|
|
|
MiniVoyager is a monitoring and control system kit for sail and motor yachts up to 60'. It is composed of a 8.4" touch screen monitor and of a case housing the referred software, which allows the monitoring of the main on board functions at a fingertip. It is extremely easy to install as it doesn't require specialized staff and assistance to start it up. As it is designed according to the most advanced technology, you can actually profit by a fully safe, reliable and unexpensive system. The satellite alarm system Smarty can be integrated into MiniVoyager.
|
|
|
|
see the results for the following category : 
