|
|
| Todd's one piece molded Water/Holding Boat tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all United States Coast Guard standards. SURPASS® material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. |
|
Waste tank for boat 90 ltr. with integrated Bilge/Waste pump for boat which makes a complete system for a convenient storage and discharge of waste water.
The tank is made of polyethylene and is odour and permeation free which also concerns the rubber fittings used.
The tank is fitted with two discharge outlets. One is for connection to a deckmounted fitting and one is connected to the Bilge/Waste pump for overboard discharge.
RM69 holdingtanks fully comply with the ISO 8099:2000(E) standard. |
|
Buffertank, capacity 25 ltr. can collect boat toilet waste when overboard discharging is prohibited or for environmental reasons not desirable. The buffertank is placed around the toilet and can be fixed with the stainless steel clip supplied. The buffertank will in any way not disturb the access and use of the toilet. Supply is inclusive all fittings to connect the tank for boats to the toilet. Supplied as well is a three way valve. This three way valve will be installed on the existing toilet pump for boats and the user can select with the selection switch for boats where the waste will be pumped to (to the buffer tank or direct overboard). The buffertank can be emptied with the toilet
pump or a pump out station. |
|
BoatWide manufacture high quality custom built boat tanks for Spain, the Balearics and Portugal (BoatWide can also brand tanks as "Tek Tanks"). BoatWide provide custom built tanks in 10mm thick high density polyethylene suitable for Water, Waste or Diesel, for boats, vehicles, boat houses and many other applications.
BoatWide take a lot of care in making the tanks exactly to the size and shape measurements. Fittings can be added such as hatches, dip tubes, senders and guages, of course an inlet, outlet and vent are necesary. Each tank is custom made to the customers requirements and the space available to hold the tank. The tanks are guaranteed for 3 years and comply with ISO standards. |
|
Waste marine water tanks suitable for marine holding tanks or for grey water (washing waster or shower water)
Manufactured from High Density Polyethylene. These marine tanks are yellow in colour and come complete with an inspection sailboat cover which includes a 38mm dip tube and threaded male 1 1/2" BSP holes for inlet, outlet. A threaded 1" BSP female hole for vent. A threaded 3/8" BSP female hole for flush.
Hosetails and blanks need to be bought separately. |
|
RHINE STREAM makes tanks for boats made of polyethylene (PE). The tanks can be used for the admission of water, Diesel, Fäkalien or grey water. The material polyethylene is in the best way suitable for tanks on boats and marine ships.
The material polyethylene (PE) draws out through:
small weight
not rusting
small Geräuschübertragung
Taste-neutrally (importantly with marine water tanks)
no condensation
Smell tightness
We supply prefabricated standard tanks to different forms and sizes. Please call us your intended purpose. We send gladly the appropriate documents to you.
|
|
The CENTURION is a high level & overfill boat alarm system designed in compliance with USCG & IMO requirements for tankships. Electrically independent alarm systems for both 95% & 98% tank for boats levels are housed in the CENTURION controller for boats in the cargo control room.
|
|
| ... products without information |
| |
These marine fuel tank are constructed of High-quality and UL approved.
The 25L (6.6-gallon) tank for boat includes cap and fuel level gauge. The 12L (3.1-gallon) tank has not fuel level gauge.
|
|
Designed to store fuel or drinking water.
Thanks to its slim shape it is easy to stow and it occupies a minimum of space.
High-density polyethylene.
Neutral colour tank for boats for the storage of drinking water.
Grey tank for the storage of any kind of fuel. |
|
These marine fuel tank are constructed of High-quality and UL approved.
The 25L (6.6-gallon) tank for boat includes cap and fuel level gauge. The 12L (3.1-gallon) tank has not fuel level gauge.
|
|
The technique of storing and transporting liquids through the use of flexible marine tanks has many advantages :
· lightness
· handiness
· adaptability
· fiability
NAUTA® FLEXIBLE TANKS provide many advantages over rigid tanks and have therefore, become very popular with both yacht-builders and boat owners.
Each of these tanks uses an extremely rugged 935-dtex nylon fabric, coated on both sides with a neoprene / nitrile compound.
Heavily lapped seams are inside-reinforced with a “doubler” to provide extra strength. All NAUTA® tanks are vulcanised to assure leakproof boat panels and seams for years of trouble-tree service.
Because of their flexibility and the NAUTA® range of sizes, these tanks can fit into almost any space, especially those odd-shaped places that would otherwise be wasted.
NAUTA® tanks are very easy to work with. Several for water and holding are available with fittings already installed. But NAUTA® ‘s construction allows custom placement of fittings to boat suit your particular requirements and makes it simple to install them ( See Fittings for Nauta Flexible Tank )
|
|
See-thru tank for boat makes fuel level visible from any angle. Tank includes vented cap, filtered pick-up tube, and gas line coupling for 1/4" NPT fittings. 21" L x 11-1/2" W x 9-1/2" H. Adapts to all outboard engines for boats. Massachusetts Fire Marshal Approval Number PC-156. Meets both ABYC and CSA.
|
|
| CE marked boat fuel tanks suitable for petrol and diesel. Manufactured from High Density Polyethylene. These tanks for boats are red in colour and come complete with inspection hatch, filler cap with vent and an 10mm fitting with pickup pipe for fuel feed. A fuel return may also be fitted. If you prefer there is a separate vent fitting located next to the feed. This is a 1/2" hose tail. |
|
Chrome-plated zinc vents with spark-proof screened holes.
All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations.
|
|
Each harbor has in heart to reduce the risks of pollution,
of contamination, of fire or explosion related to the filling
fuel tank.
Often, the fuel is rejected into the water of the harbor at the time
filling, is by the vent of the tank or directly
over the bridge.
It is completely logical to take precautions in order to avoid discharges, not only to protect the environment
but also from an economic standpoint.
POLYAMIDE Reference SYSTEM: SCPYL002
- 1 Reserve supplements of 2 liters with float
- 1 Control box with cable of 2.50 m (delivered without marine piles)
- 1 Support case for boats of arrangement
- 2 Collars 12/20 mm
- 1 Sticker "with Ecoplein I preserve the environment"
- 1 Note of assembly and use
Dimension of the reserve:
100 X 100 mm Height 280 mm
Assembly of the Vertical or Horizontal reserve
by directing the following float locates
Exit connection 1/2 GASES Female
Allows various diameters of pipes, delivered with tail
grooved for diameter 16 mm
FOR GASOLINE AND FUEL OIL |
|
Each harbor has in heart to reduce the risks of pollution,
of contamination, of fire or explosion related to the filling
fuel tank for boat.
Often, the fuel is rejected into the water of the harbor at the time
filling, is by the vent of the tank or directly
over the bridge.
It is completely logical to take precautions in order to avoid discharges, not only to protect the environment
but also from an economic standpoint.
POLYAMIDE Reference SYSTEM: SCPYL001
- 1 Reserve supplements of 2 liters with float
- 1 Control box with cable for boats of 2.50 m (delivered without marine piles)
- 1 Support case for boat of arrangement
- 1 Support holds with collar 510 mm
- 2 Collars 12/20 mm
- 1 Sticker "with Ecoplein I preserve the environment"
- 1 Note of assembly and use
Dimension of the reserve:
Diameter 135 mm Height 280 mm
For a pipe for boat of exit towards the vent of 14 mm
AS A TANK FUEL OIL FOR BOAT ONLY HAS |
|
Each harbor has in heart to reduce the risks of pollution,
of contamination, of fire or explosion related to the filling
fuel tank.
Often, the fuel is rejected into the water of the harbor at the time
filling, is by the vent of the tank or directly
over the bridge.
It is completely logical to take precautions in order to avoid discharges, not only to protect the environment
but also from an economic standpoint.
STAINLESS SYSTEM 316 L Reference: SCI02002 - SCI02003
- 1 Reserve supplements of 2 liters with float
- 1 Control box with cable of 2.50 m (delivered without marine piles)
- 1 Support case for boats of arrangement
- 2 Collars 25/40 mm
- 1 Sticker "with Ecoplein I preserve the environment"
- 1 Note of assembly and use
Dimension of the reserve:
120 mm X 80 mm X. 220 mm
Exit connection 1/2 GASES Female ref.: SCI02002
Exit connection 1 ' GAS Female ref.: SCI02003
Allows various diameters of pipes, delivered without
grooved tail.
AS A TANK FUEL OIL ONLY HAS |
|
| ... products without information |
| |
... see all the products in the category
Fuel tanks
|
|
|
see the results for the following category
