|
|
HYDRAULIC HELMS
The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder marine block for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different marine kits can be found on the price list. |
|
| The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for boat for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different marine kits can be found on the price list. |
|
Reliable operation of a steering system depends upon the quality and performance of the helm pump. The Jastram "H" series manually operated helm is a precision made axial piston pump specifically designed to operate effectively at a very slow turning rate.
The H60, 90 and 110 are among the largest helm boat pumps made and provide excellent primary or backup steering for large steering systems for boats. |
|
Reliable operation of a steering system depends upon the quality and performance of the helm pump for boat. The Jastram "H" series manually operated helm is a precision made axial piston pump specifically designed to operate effectively at a very slow turning rate.
The H26/36/58 provide excellent primary or backup steering for small and relatively large marine steering systems. |
|
| ... products without information |
| |
| ... products without information |
| |
| ... products without information |
| |
| ... products without information |
| |
Aqua Jet WPS 2.9, 3.5, 4.0 & 5.2 and Flowmaster 5.0
The new generation of WPS pumps for boats - 12V or 24V DC. Quiet and pulsation-free even at low speeds, the new Aqua Jet five-chamber diaphragm pump from Johnson Pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats.
NEW! WPS 3.5 Fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise. |
|
Self-priming diaphragm pump for boat with 12v, 24v or 32v DC electric motor for boat. Flow rates up to 17 litres/min (4.5 US gallons/min), pressure switch control, capable of pressures up to 3.2bar (45psi)
|
|
"WPS600
A compact and efficient water supply pump, ideal for pleasure boats with one or two tapping points. It combines easy installation with a low current consump-tion. The pump can be installed verti-cally as well as horizontally.
WPS800 and WPS1200
Water supply boat pumps for medium sized and large boats where you want to be able to use several taps, such as the shower and washing up, at the same time. WPS1200 is available for both 12V and 24V systems."
|
|
The Mach5 water pressure system from Headhunter represents a next quantum leap in pump technology with many advanced features and improvements over conventional water pressure pumps for boats.
An integrated control system provides instant dry run protection, and allows the pump to be used with or without a pressure accumulator tank for boat. The Mach5 incorporates a state-of-the-art multistage impeller system driven by a super-efficient water-cooled motor to generate up to 20 gallons per minute, instantaneously, on demand, and in virtual silence. An easy to read control panel for boat on top of the pump provides instant visible status information as well as reset capability.
|
|
| This new medium demand unit from Johnson Pump for boats consists of an Aqua Jet WPS five-chamber diaphragm pump integrated with a pre-pressurised 2 liters accumulator tank for boat and inline strainer. The unit's design allows for either vertical or horizontal installation. |
|
• Integrated pump for boat and tank system
• May be mounted vertically or horizontally
• Flow rates up to 4.5 US Gallons/min (17 Lires/min)
|
|
| The most advanced system available, this fully-automatic, quiet unit pumps for boats tasteless, odorless water smoothly and consistently. Self-priming, corrosion-resistant and NSF certified tank. The result is longer life, reduced cycling, smooth flow and less wear on the pump. As always, the pump can run dry without damage. |
|
| The Rhine current drinking water plant RH 028 is suitable for occupation marine ships and large yacht ones. Equipped with a calmly running, sucking in, single-step centrifugal pump for boats. It produces a pressure up to 3 bar. The pump made of brass and high-grade steel is manufactured. The plant consists 22 of an l high-grade steel pressure vessel, pump with adjustable push button switch for boats and Verbindungsschlauch with check valve. The pump can be dismantled by the tank for boats and set up separately. On request the plant is available also with second and third compression phase, so that a pressure up to 5 bar can be achieved. |
|
| ... products without information |
| |
Livewell Pumps for boats
Innovative design includes many new and exciting features including a quick, one hand "push button" motor cartridge removal system, and patented rotatable base.
|
|
| The Pro Baitmaster is excellent for livewell or washdown applications in harsh marine environments. It is completely encapsulated by SHURCote a tough waterproof coating protecting it from splashed liquids. Featuring marine tough sealed shutoff boat switches and ignition protection, the Baitmasteris rated for continuous duty application. The Pro Baitmaster is excellent for livewell or washdown applications in harsh environments. It is completely encapsulated by SHURCote a tough waterproof coating protecting it from splashed liquids. |
|
|
|
see the results for the following category
