|
|
New camouflage wetsuit with a brown pattern and open cell inside.
Available in 5mm and 6,5mm. Anatomic and pre-formed cut with 8 sizes to choose from. The wetsuit seams are covered with elastic strips of lycra and round patches are applied at the meeting points in the seams.
|
|
A new wetsuit that comes in 5 mm and 6,5 mm with an open cell interior and a black outer lining.
Produced with a new ultra elastic material that features multi-directional stretch for maximum comfort and thermal efficiency.
The wetsuit seams are covered with elastic strips of lycra and round patches are applied at the meeting points in the seams.
In the 7 mm version jacket and pants are sold separately.
|
|
YAMAMOTO 45
This suit is entirely made with the original Japanese neoprene Yamamoto 45, natural cell on the inside and smooth skin on the outside.
The bonding of the various parts of the wetsuit is carried out by hand, through a number of steps.
The wetsuit features a unique softness and has the big advantage of having no outside lining. This allows the suit to immediately dry, once out of water.
The wetsuit is available in the following thicknesses: 5.0mm and 6.5 mm.
The jacket features plastic button closures and the pants are available in the standard version without suspenders.
The jacket and pants, available in 5 sizes, from S to XXXL, are sold separately.
|
|
QF4 SEAMLESS
Single lined neoprene wetsuit, featuring natural cell inside and a black super elastic lining outside.
The wetsuit is seamless and therefore there is no stitching found in this wetsuit.
The bonding, of the various parts of the wetsuit, is reinforced with an elastic taping that guarantees resistance while not compromising flexibility.
The wetsuit is available in the following thicknesses: 3.0mm, 5.0mm.
The jacket features plastic button closures and the pants are available in the longjohn version.
The jacket and pants, available in 5 sizes, from S to XXXL, are sold separately.
|
|
GREEN MIMETIC
Single lined neoprene wetsuit, featuring natural cell inside and a green camouflage lining outside.
The wetsuit is available in the following thicknesses: 3.0mm, 5.0mm, 7.0mm and 9.0mm.
The jacket features the classic plastic buttons; the pants are available both in the longjohn version as well as the classic version without suspenders.
The jacket and pants, available in 6 sizes, from S to XXXL, are sold separately in order to offer the best fit for each and every fisherman.
|
|
Suited for clear bottom use – Lined interior – Pre-shaped – 5mm for use in temperate water
Suit especially for light sea beds
• Open-cell titanium neoprene and green camouflage jersey
• Preformed Farmer John with 3.5- or 5-mm suspenders
• Preformed jacket without closure, 3.5, 5, or 7 mm
• Supratex reinforcements
• Cuffs on ankles and wrists
|
|
Model: two-piece wetsuit
Thickness: 3,5 mm - 5 mm
Neoprene: outer nylon material. Inner lining Plush and Smooth Skin (salopette)
Features: With hood, zipless. Anatomical cut around the face in Smooth Skin Nylon. Trimmed Lycra edges
Stitching: Single-thread blind stitching
Weights needed:
- Between 3 and 7 kilos for 3.5 mm. version
- Between 4 and 9 kilos for 5 mm. version
Below mentioned value refers to the average weight required for proper diving with the two piece suit SEA ROYAL. Equipment type, body features and environment, may alter the value
|
|
Models:
- vest 6,5 mm - 5 mm - 3,5 mm
- long-john trouser 5 mm
- Hi-waist trouser 5 mm - 3,5 mm
Outer lining: BFB 24 Nylon
Inner lining: smooth "CELL" Neoprene
Stitching: outer blind stitching (double thread). High resistance to abrasions
Anatomical cut
Arms & legs: pre-formed and pre-inclined
Vests: hooded vests. "Alamari" locking. Melco pad chest protection
Materials: vests and trousers Race|Flex400 are made with stretchable Neoprene
|
|
Models:
vest 5 mm
long-john trouser 5 mm
Hi-waist trouser 5 mm
Outer lining: TECHSPAN
Inner lining: smooth "CELL" Neoprene
Stitching: outer blind stitching (double thread). High resistance to abrasions
Anatomical cut
Arms & legs: pre-formed and pre-inclined
Vest: hooded vest. "Alamari" locking. Melco pad chest protection
Materials: vest and trousers Combat Flex are made with Hi-stretchable Neoprene to facilitate dressing and to assure a great comfort
|
|
DESCRIPTION
Inner/Outside : X Tend jersey
Assembly : Edge to edge gluing
Stitching : double stitching with two wires overcasting,
stitchings don't get right through, then don't allow any
water leak.
Cut : Anatomical form for arms and legs in semi-folded
position. Arms in 90° position, seamless under arms.
Chin strap.
|
|
Two neoprenes in one suit.
The most worn parts of the jacket are made out with the Xtend flexible neoprene: between the shoulder blades, under the arms, sides panels, behind the head and in the back of the neck. Assured comfort and flexibility.
With the success of the jacket model, new pants models were drawn on the same principle. The interior of the legs (from the crotch to ankles) is made in a very flexible neoprene to easy the donning. Smooth-outside neoprene for thermal comfort.
The suit, with a full open cell interior, is the perfect compromise between warmth and comfort.
|
|
|
Anatomically cut wetsuit, open cell inside, long john or waistband trousers. Watertight seals fit in wrists, ankles and hood.In 3, 5 and 7 mm.
|
|
The "only" Chicle , elastic and soft, with Mesh outside and open cell inside, gives
this wetsuit an incredible adaptability to the body. Elbows,knees and trauser crotch with nylon out side for better reinforcement and abrasion resistance.
5/7mm
|
|
|
The new 2008 Picasso camouflage. Open Cell inside with watertight seals fit in wrists, ankles and hood. In 3 mm. Waistband trousers. In 5 & 7 mm. Long john trausers.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
