|
|
|
|
|
|
|
RECYtherm: RECYtherm is a high volume fleece for thermal and sound insulation of complete hulls. The surface, a PE-foil with aluminum cover, acts as a vapor barrier. RECYtherm is also suitable as sound-insulation material for smaller engines.
RECYguard: By combining RECYtherm with a heavy foil (2mm thickness and 3,7 kg/m² weight) the engine noise is also eliminated at the lower frequency band (vibrations). An additional thin fleece between heavy foil and wall makes sure that vibrations are not transferred to the hull.
RECYcombi: For big engines (500 hp and more) we recommend our product RECYcombi. This product has the same base as RECYguard but the top layer is an 3-D shaped pressed polyester-fleece. The shape of a honeycomb leads to a diffuse reflection of the sound and the additional fleece layer provides better absorption of the vibrations. Furthermore the high-value look of the surface gives big engine rooms a very nice appearance.
Einsatzort:
Engine room; generators
Purpose:
Sheet of textile fleece for optimal reduction
of noise and vibration
Characteristics:
High absorption/Insulation capabilities,
resistant against rotting,
fuel-resistant surface,
aesthetical desgin
Format:
Standard format 800 x 1200 mm
other formats on request
Surface material:
Duplofoil ALU/PE re-inforced with a textile layer
Options:
Other surface materials on request
selfadhesive backing*
|
|
|
|
|
|
|
RECYtherm: RECYtherm is a high volume fleece for thermal and sound insulation of complete hulls. The surface, a PE-foil with aluminum cover, acts as a vapor barrier. RECYtherm is also suitable as sound-insulation material for smaller engines.
RECYguard: By combining RECYtherm with a heavy foil (2mm thickness and 3,7 kg/m² weight) the engine noise is also eliminated at the lower frequency band (vibrations). An additional thin fleece between heavy foil and wall makes sure that vibrations are not transferred to the hull.
RECYcombi: For big engines (500 hp and more) we recommend our product RECYcombi. This product has the same base as RECYguard but the top layer is an 3-D shaped pressed polyester-fleece. The shape of a honeycomb leads to a diffuse reflection of the sound and the additional fleece layer provides better absorption of the vibrations. Furthermore the high-value look of the surface gives big engine rooms a very nice appearance.
Application:
Engine room; generators
Purpose:
Sheet of textile fleece for optimal reduction
of noise and vibration
Characteristics:
High absorption/Insulation capabilities,
resistant against rotting,
fuel-resistant surface,
aesthetical desgin
Format:
Standard format 1040 x 1100 mm
other formats on request
Surface material:
Glassfibre woven with aluminium cover
Options:
Other surface materials on request
self adhesive backing
|
|
Aplication:
tank-insulation, engine rooms, generator-boxes
Purpose:
reduction of structure borne noise with the help of heavy foil in combination with a fleece
Properties:
heavy foil with high specific weight (1850 gr/m³)
high range of temperature ( - 40 bis + 80° C)
high quality appearance with aluminum foil cover
Make-up:
rolled
width: 1500 mm
thickness: standard 5,5 mm (other thicknesses on request)
Options:
cut parts
wide range of different surfaces (PE-foil with Aluminum cover, glass-fibre woven, textile, etc.)
selfadhesive backing*
|
|
|
|
|
|
|
RECYtherm: RECYtherm is a high volume fleece for thermal and sound insulation of complete hulls. The surface, a PE-foil with aluminum cover, acts as a vapor barrier. RECYtherm is also suitable as sound-insulation material for smaller engines.
RECYguard: By combining RECYtherm with a heavy foil (2mm thickness and 3,7 kg/m² weight) the engine noise is also eliminated at the lower frequency band (vibrations). An additional thin fleece between heavy foil and wall makes sure that vibrations are not transferred to the hull.
RECYcombi: For big engines (500 hp and more) we recommend our product RECYcombi. This product has the same base as RECYguard but the top layer is an 3-D shaped pressed polyester-fleece. The shape of a honeycomb leads to a diffuse reflection of the sound and the additional fleece layer provides better absorption of the vibrations. Furthermore the high-value look of the surface gives big engine rooms a very nice appearance.
Application:
Body-, ceiling- and wall insulation
Purpose:
Heat- and sound insulation with water
Vapour transmission barrier
no condensation
Properties:
Flame retardent acc. To FMVSS 302
Group of heat conductability WLG 030
not rotting
wear resistant
Make-up:
Sheets of 800 x 1200mm
Rolls with a width of 1500mm
Other dimensions on request
Surface Material:
Duplofoil ALU/PE re-inforced with a textile layer
Options:
Other surface materials on request
Ready cut parts on request
self-adhesive backing
|
|
High Performance Acoustic Insulation
For over a decade the name BARRIER has been associated with the highest performance and most technologically advanced thermal insulation in the world. Now BARRIER Ultra-dB™ offers the same quantum leap in noise control technology. BARRIER Ultra-dB acoustic insulation is a carefully engineered soundproofing material intended for those applications requiring superior performance without the size and weight of laminated foam and lead/vinyl products.
|
|
|
|
|
|
|
QL sound absorbent panels effectively muffle engine noise. The insulation pa-nels have a density of 100 kg/m3, which is just the right weight to absorb marine
engine noise frequencies and noise levels.
They are made of recycled foam, which has a combination of weight and po-rosity that both insulates and absorbs. Two types are available, self-adhesive or non-adhesive.
QL sound absorbent panels meet the fire safety requirements for CE marking. The insulation material is protected by an oil-resistant film that is easy to clean. The foam plastic is impregnated to make it self-extinguishing, and to withstand a max. temperature of 200° C (390°F).
The insulation is sold in rectangular pa-nels: 500 x 1000 mm (20 x 40”), which are easy to transport and to apply. They are available in three thicknesses, 20, 30 and 50 mm, and can easily be cut to shape with a sharp knife.
It is important to fit the panels tightly together, using adhesive tape to seal the joints to prevent noise leakage, or pene-tration of water, which could be absor-bed by the material."
|
|
|
Barrier Ultra-R™ is Glacier Bay's high-performance superinsulation panel. At R-50 per inch (10x the insulation value of polyurethane foam), it has the highest thermal insulation performance currently available anywhere. Barrier Ultra-R is a rigid, polypropylene-encased vacuum insulation panel that is custom-made to your dimensions. It can also be purchased with an optional fiberglass facing (on one or both sides) making it an ideal high-performance insulation liner for retrofit to existing refrigerators and iceboxes. If you're building an entirely new box, use Glacier Bay Barrier Ultra-R panels and our superinsulated "Ready-To-Mount" Hatches to make an easily assembled, complete icebox.
|
|
|
Build or re-build your refrigerator, freezer or ice box better than ever with the "Ready-to-Mount"™ hatch. Designed and manufactured by Glacier Bay, the world's leading innovator in marine refrigeration products, the Ready-to-Mount hatch dramatically simplifies ice box construction and offers many important advantages over traditional lids...
|
|
KIT 4 PLATES NAVIBEL AG 120 40 mm - MASS 2 kg
Foam of sound-proofing planes agglomerated polyurethane of a density of 120 kg/m3 covered with a film PU for the sealing with foam. The mass is out of PVC stuck hot and interdependent of the mass agglo.
KIT 3 PLATES NAVIBEL AG 80 25 mm
Foam of alveolate sound-proofing. Thickness 25mm
quality agglomerated, density 80kg/m3 covered with a film PU for the sealing of foam.
KIT 4 ALVEOLATE PLATES 50 MM
Foam of alveolate sound-proofing, thickness 50 mm standard quality.
|
|
| ... products without information |
| |
UNI-SOLAR flexible modules can improve the quality of your spare time. Noiseless, walking-on, durable and weather-resistant, the modules convert sunlight into power using an advanced Triple Junction thin film photovoltaic technology.
Available in three models, in 5, 11 and 32 Watt power, the Uni-SOLAR battery chargers save your money, by reducing battery maintenance and by extending battery life. The uniquely functional design makes them perfectly suited to meet battery charging needs for boating, rv and automotive applications: an easy and environment-compatible way to solve your energy problems on board. When the boat is left unattended, the solar panel maintains the battery in top shape, avoiding the occasional inconvenience of a dead battery.
|
|
|
UNI-SOLAR® photovoltaic laminates (PVL) are flexible and lightweight laminates made exceptionally durable by encapsulation in UV stabilized polymers. The polymer encapsulation is partially constructed of durable ETFE, (example, Tefzel®) a high-light-transmissive polymer.
|
|
Kyocera solar modules are a reliable, virtually maintenance-free power supply designed to convert sunlight into electricity at the highest possible efficiency. Kyocera began researching photovoltaics in 1975 and has installed thousands of systems throughout the world since 1978. These systems are ideal for charging storage batteries to power remote homes, recreational vehicles, boats, telecommunications systems and other consumer and commercial applications.
|
|
|
Our framed modules are mounted on permanent; fixed position module racks that can be adjusted for optimum tilt, wind resistance and exposure to sunlight. These glass-free, lightweight, vandal resistant modules can be used in a wide variety of applications from fence charging to telecommunications.
|
|
Typical applications: Residential and commercial
Key features: High power dark back, aesthetic, all purpose, rack mount
Cell technology: Multicrystalline
Dimensions: 1680mm x 837mm x 50mm
Weight: 37.84 lbs
Glass type: Anti-reflective coating
Frame type: Universal, dark bronze anodized
|
|
|
Sometimes you just need serious energy to keep your RV or boat going and going. Maybe you don't want an uppity, high-maintenance mechanical generator spewing out diesel or propane fumes. (Cough, cough). Fresh air, man. That's why you're out here doing yoga in the middle of who-knows-where, getting off on that that heavenly air.
|
|
| ... products without information |
| |
thickness excluded Veneer or Hpl,
Final thickness included Veneer + 1mm. (+/-)
Final thickness included Hpl + 1,6mm. (+/-)
Moistre resistant chipboard which can be used in a moistre surrounding.
Extra strong, stable and perfect for screws.
Minimal influence from humidity like swelling and transformation.
Easy workable, multifunctional standard board.
Weight ca. 700 kg/m3.
|
|
|
Teak Marine fabricates beautiful interior floors for all sizes and styles of yachts. Our unique pre-fabricated system enables Teak Marine clients to choose from a variety of exotic woods to match or build a new cabin sole. The layout for the interior can either be straight or sprung planking. Seams can be made from beautiful woods such as holly, walnut or maple.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
