|
|
Optima will help you calibrate your boats navigation computer : alignment of the wind vane, calibration of the speedometer and compass alignment. It will also allow you to construct the particular polar diagrams of your boat
Use those diagrams in race (laylines, VMG, target speeds) or in a route display in your navigation software
|
|
Tactique is a program totally dedicated to racing, designed right from the start to meet the needs of races "near the coast": windward-leeward loops and coastal courses.
Tactique has been designed with the following in mind:
during a race, the program simply requires the markers to be indicated before the start, which is very simple to do;
the information proposed evolves with the situation: the start, beating, running, windward-leeward loop, coastal course;
most of the information is presented simultaneously on the screen because, as it is selected for the situation, there is not too much of it;
each window (toolbar, cartography, navigational information, route plan of the course) has its own place on the screen;
the program offers all the information necessary for taking the best decision: time and distance for getting to the key points of the course (start line, end of the line, laylines, markers etc.), comparison of the performance of the boat with its potential, anticipation of the next beats or runs, etc;
this information is calculated using all the parameters necessary: the boat's speed potential, best angles upwind and downwind, anticipation of current changes, etc.
|
|
The GEONAV PC NAV, designed for all kind of boats, is the perfect software to satisfy any navigation needs. With the connection to a GPS antenna, GEONAV PC NAV is easy to install and really intuitive to utilize thanks to a new system of clear icons . All charting operations can be carried out by a simple click of the mouse, and Routes, Tracks and Markers can be easily trasferred from your PC to other Geonav plotters and vice versa.
The A.I.S. function is available: when connected to a specific receiver, this device will allow you to indetify every boat or ship transmitting this specific signal, and to see its position directly on the cartography.
The GEONAV PC NAV utilizes Navionics Gold™ charts stored on CD or on CompactFlash™.
HW REQUIREMENTS
For the best use of GEONAV products the minimun hardware/software requirements are:
Pentium 100 processor or 300 Mhz
256Mbytes RAM or greater
Minimum 2 Gbytes Hard Disk free (without charts)
SVGA card or above
USB port
RS232 Serial port
Microsoft® Mouse or similar
Windows® 98 or above
|
|
| ... products without information |
| |
... see all the products in the category
Software
|
|
Kaschper Single Sculls are available in four models: Custom, International, Extreme, and the Xeno Muller Signature Single. All models are created with various carbons, honeycomb cores, kevlar, and other materials in layered processes. All are high temperature oven cured. All lightweight aluminum components are hard coat anodyzed for protection in salt water. Hardware includes stainless steel or titanium oarlock pins, bolts, nuts, etc. Singles available in 5 weight classes: Flyweight, Lightweight, Midweight, Heavyweight, Super Heavyweight. Photos, specifications, contacts, and purchase information are available on our web site: www.kaschper.com
|
|
|
The Explorer 24 is a new design from the legendary hull designer Klaus Filter, known for creating hulls that are fast running and smooth to row - this boat is right on the mark. Longer and slightly narrower than our Explorer 21, the Explorer 24 is designed for speed. Higher bow and stern decks and the revolutionary WinTech Self-Bailing cockpit allow this boat to handle the rougher conditions of open water rowing. Angled saxboards give more lateral stability to help keep the boat set. An excellent choice for the rower who needs a bit of stability yet wants the performance of a racing single. Available in two construction-types and weights so you can choose how much boat you need.
|
|
Explorer is a new class of recreational shells that incorporates the technology of our racing shells and the performance lineage of our entire racing fleet.
Designed by Klaus Filter as a teaching boat that's fun to row, it's also perfect for the recreational rower who wants optimal exercise while exploring the natural surroundings on the water.
The Explorer is stable, comfortable, strong and sleek. You'll also find the Explorer lighter, quicker, and stiffer than traditional recreational boats as it tracks well, maneuvers easily, and delivers speed typically seen in true racing shells. The new Quick Release rigger can be added or removed in just seconds, making the boat easy to carry and launch.
All levels of rowers will enjoy rowing the Explorer in all kinds of conditions. Perfect for family or club use and for adaptive rowers.
|
|
--
PRICE: $3895 USA
--
WHERE TO BUY:
Europe: vickie@therowingcompany.co.uk
Elsewhere: Factory Direct from Florida, USA! We ship all over the world!
Dealer inquirys invited. bill@littlerivermarine.com
Visit us at www.LittleRiverMarine.com
--
Never before has set-up and go been so simple. Toss it on the car racks and go. Go anywhere. No longer are you restricted to marked courses and motored escorts. This rocket ship will take on the heartiest open water at midday, and clock in at mach one in the calm backwaters.
|
|
| ... products without information |
| |
|
Kaschper Fours With Coxswain are available in four models: Custom, International, Extreme, and Bio Rig. All models are created with various carbons, honeycomb cores, kevlar, and other materials in layered processes. All are high temperature oven cured. All lightweight aluminum components are hard coat anodyzed for protection in salt water. Hardware includes stainless steel oarlock pins, bolts, nuts, etc. Photos, specifications, contacts, and purchase information are available on our website: www.kaschper.com
|
|
|
Kaschper Quad Sculls, Coxless Fours , and Quad/Four Convertibles are available in three models: Custom, International, and Extreme. All boats are created with various carbons, honeycomb cores, kevlar, and other materials in layered processes. All are high temperature oven cured. All lightweight aluminum components are hard coat anodyzed for protection in salt water. Hardware includes stainless steel oarlock pins, bolts, nuts, etc. Photos, specifications, contacts, and purchase information are available on our website: www.kaschper.com
|
|
The new Odyssey, with a durable Gelcoat finish, is our technologically advanced interpretation of the traditional European Touring boat. Based on the construction methodology of our Club Racer shells, Odyssey is designed for longer or overnight excursions on river, lake or coastline.
The WinTech Odyssey can add to your social events. A group can pack a lunch and row to an island or other spot and enjoy a picnic or plan longer excursions to interesting sites. These boats are popular in Europe for both recreation and special racing and we think they'll catch on in the US as well, once people discover the comfortable coxswain/passenger seating and the increased capacity for storing tents, food and other equipment.
The Odyssey's defined keel enhances tracking, the large rudder increases maneuverability and the v-shaped bow pierces waves. The defined keel also has a metal strip to protect the boat when landing on the shore. Single skin below the water line offers impact resistance.
|
|
|
Kaschper Double Sculls and Double/Pair Convertibles are available in three models: Custom, International, and Extreme. All boats are created with various carbons, honeycomb cores, kevlar, and other materials in layered processes. All are high temperature oven cured. All lightweight aluminum components are hard coat anodyzed for protection in salt water. Hardware includes stainless steel oarlock pins, bolts, nuts, etc. Photos, specifications, contacts, and purchase information are available on our web site: .www.kaschper.com
|
|
|
Kaschper Pair Skiffs, and Pair/Double Convertibles are available in three models: Custom, Internatonal, and Extreme. All boats are created with various carbons, honeycomb cores, kevlar, and other materials in layered processes. All are high temperature oven cured. All lightweight aluminum components are hard coat anodyzed for protection in salt water. Hardware includes stainless steel oarlock pins, bolts, nuts, etc. Photos, specifications, contacts, and purchase information are available on our web site: www.kaschper.com
|
|
| ... products without information |
| |
| ... products without information |
| |
Sizes Available
• Lightweight
• Midweight
• Heavyweight
• Super Heavyweight See the
Designed For
• Racing at all competition levels
Features
Hull choice: XTW or XTM
TWing low profile adjustable riggers
Concept II Oarlocks
Stainless steel pins, nuts, bolts
KRS pop-on oarlock height washers
Extra long adjustable tracks
Reactiv steel bearing seats
Flexboard footstretchers with KRS safety rowing shoes
All aluminum components hard coat anodyzed
Sculling riggers available at current pricing for convertible 8+x
Finishes
• Super tough clear coated automotive finishes.
• Choose any one or two colors.
Dimensions • Overall length: 17.67m / 57' 10 1/2"
• Width at waterline: 0.552m / 21 3/4"
• Average boat weight: 96kg / 200-212lbs
Price $23,000 USD / $27,600 CAD
|
|
... see all the products in the category
| |