|
|
Model L16/24
Application Products:
Medium-speed 4-ST Marine Gen-set
Oil Chemical Tanker and others
|
|
- Bore : 320 mm, Stroke : 400 mm
- Cooling Water Supply : Fresh Water L.T and H.T
- Fuel : MDO, HFO (700 cSt at 50 deg C)
- Lubricating Oil Supply : SAE 40
- Compressed Air Supply : 10 to 30 bar for starting and control.
|
|
|
|
|
|
|
A vessel that needs 16 to 20 kW is large
enough that continuous power is critical to
its operation. Unfortunately, most sets in
this range have small displacement, light
duty diesels that can’t stand up to heavy
use. Some even need turbochargers to
compensate for their small displacement.
The M844W3 is different. Powered by a
naturally aspirated, four cylinder diesel, this
set has the low end torque needed to start
big electric motors. Yet it weighs only 890
pounds and is compact in size. The
M844W3 meets US EPA Tier III
emission standards protecting the
environment you enjoy.
Vibration isolation mounts, cast air intake
manifold and sound maze intake silencer
make the set remarkably smooth and quiet.
A sound enclosure is available.
Operation and maintaince are simple. A
20 foot wire harness and control panel lets
you run the set from your boat’s bridge.
The engine’s DC electrical system uses
reliable relays instead of delicate printed
circuit boards. If a failure should occur, you
can simply plug in an inexpensive relay. All
service points are on one side within easy
reach. The sea water pump’s location makes
impeller changes a snap.
Need hydraulic power?
Add an optional front
PTO (power take off)
with an electric clutch.
At the touch of a button
you have power for
your bowthruster and
winches without starting
your main engine.
|
|
Engine Power Ranges of MAN B&W Marine GenSets
The stated engine outputs are the Continuous Rating Overload corresponds to 110% Continuous Service Rating, (However 105% for L32/40) and may be permitted for a limited period of one hour every 12 hours
Reference conditions
Ambient temperature: 318 K = 45 'C
Ambient pressure: 1,000 mbar
Seawater cooling temperature
Upstream of charge air cooler: 305 K = 32 'C
|
|
- Bore : 250 mm, Stroke : 330 mm
- Cooling Water Supply : Fresh Water L.T and H.T
- Fuel : MDO, HFO (700 cSt at 50 deg C)
- Lubricating Oil Supply : SAE 40
- Compressed Air Supply : 10 to 30 bar for starting and control.
|
|
- Bore : 170 mm, Stroke : 280 mm
- Cooling Water Supply : Fresh Water L.T and H.T
- Fuel : MDO, HFO (700 cSt at 50 deg C)
- Lubricating Oil Supply : SAE 40
- Compressed Air Supply : 10 to 30 bar for starting and control.
|
|
|
|
|
|
|
The M1064 Series marine generator sets are powered by new, US EPA Tier II compliant, Lugger diesels. These sets incorporate many new features that add high power density to the Northern Lights reputation for cast-iron reliability, simplicity and durability.
An important decision.
Whether you’re repowering your vessel or building a new yacht, your future enjoyment depends on the generator set you choose today. It will run day and night, so smooth, quiet operation, long engine life, and fuel consumption are major considerations. With so much depending on your new set, it pays to choose one that is built up to a high standard of quality; not down to a low price. It pays to choose Northern Lights.
The heritage continues.
Four decades of marine experience stands behind every Northern Lights. Yachtsmen like you have made them standard equipment on yachts from the world’s premier builders. Service is handled by an international dealer group with assistance from factory branches.
Selection without compromise.
Underloaded and overloaded generators cause problems and waste money. With five models from 33 to 99 kW, there is a M1064, 60 Hz or 50 HZ set that is just the right size for your vessel.
Multiple set power teams.
Northern Lights broad range, 5 to 520 kW, lets you combine multiple sets aboard your vessel. Use two M1064s to simplify maintenance and parts supplies. A smaller unit can be a night set. Mix and match sets for the best, single source power solution.
|
|
|
The Wärtsilä Auxpac generating sets are supplied as pre-commissioned standard packages that ensure the availability of electrical power in sufficient quantity as and when it is needed. Wärtsilä Auxpac generating sets cover an electrical power output of 500 to 2,800 kWe for either 50 or 60 Hz operation.
|
|
Diesel generators can be fitted with the equipment required by a classification society and classified.
Auxiliary diesel generator:
- provides a ship's electric power
- feeds the main board
Emergency diesel generator:
- provides a ship's standby power
- feeds the main emergency board
|
|
Diesel generators can be fitted with the equipment required by a classification society and classified.
Auxiliary diesel generator:
- provides a ship's electric power
- feeds the main board
Emergency diesel generator:
- provides a ship's standby power
- feeds the main emergency board
|
|
|
A wide range of generating sets, comprising generator and diesel engine mounted on a common baseframe, are available for both service power generation and for diesel-electric propulsion. All generating sets are based on medium-speed diesel engines designed for operating on heavy fuel oil. The generating sets are resiliently mounted and the generator voltage can be selected.
|
|
|
|
|
|
|
H. Cegielski - Pozna S.A. offers an extensive range of modern power systems based on both four-stroke and two-stroke engines. These engines are the main building block of stationary diesel-electric power stations.
The engines can be delivered either as separate units or integrated into generating sets, also with auxiliary equipment. All units are designed for installation in buildings or in stationary or mobile containers.
Stationary power plants constitute a primary source of power for public networks or industrial plants in areas where electricity supply is limited or unavailable.
Generating sets for land applications
These units are used as a primary source of power for the public power grid or industrial plants in areas where electricity supply is limited or unavailable, or as a standby power source in primary power failure situations. Generating sets can be based on either two-stroke or four-stroke engines.
The offer includes plain generating sets as well as:
- Complete stationary power plants (generating sets complete with mechanical and electrical auxiliaries and automatic control systems, installed in buildings), delivered turnkey;
- Container size (modular) power plants, designed for transport to and installation in any location.
Key target markets for these products include countries which have power supply problems and countries incorporating large islands, in which the power industry is normally based on diesel power plants (Greece, Spain, Portugal, India, Turkey, Bangladesh, Pakistan, the countries of the Middle East, Africa and Latin America).
|
|
|
A wide range of generating sets, comprising generator and diesel engine mounted on a common baseframe, are available for both service power generation and for diesel-electric propulsion. All generating sets are based on medium-speed diesel engines designed for operating on heavy fuel oil. The generating sets are resiliently mounted and the generator voltage can be selected.
|
|
|
A wide range of generating sets, comprising generator and diesel engine mounted on a common baseframe, are available for both service power generation and for diesel-electric propulsion. All generating sets are based on medium-speed diesel engines designed for operating on heavy fuel oil. The generating sets are resiliently mounted and the generator voltage can be selected.
|
|
|
A wide range of generating sets, comprising generator and diesel engine mounted on a common baseframe, are available for both service power generation and for diesel-electric propulsion. All generating sets are based on medium-speed diesel engines designed for operating on heavy fuel oil. The generating sets are resiliently mounted and the generator voltage can be selected.
|
|
|
Marine Genset %u2013 Engine 6 DZC %u2013 1500 kVA
|
|
| ... products without information |
| |
|
|