|
|
SCK Cell fenders have a very long track record and remain popular because of their simplicity, high performance, and strength. They come in a wide range of standard sizes and are interchangeable with many older cell fender types.
Features
* High performance
* Can support large panels
* Strong, well-proven design
* Ideal for low hull pressure systems
|
|
|
Berth corners are very difficult to protect. Corner Arch fenders are available in three standard sizes and provide a simple, easily installed solution to prevent damage from smaller vessels
|
|
The Donut system uses a floating ring-shaped fender which rises and falls with the water level on a central steel pile, guided by low-friction pads. The Donut system’s ability to rotate helps reduce shear forces in both fender and dolphin and allows vessels to move fore and aft (warp) along the fender.
Features
* Rotates freely
* Rises and falls with water level
* High energy absorption with low reaction force
* Very easy installation
* Low maintenance
|
|
Sea Guard fenders are unlike any other foam or pneumatic fender because they can be suspended from the dock face or floated to suit the berth structure and tide range.
Sea Guard fenders have an extra strong filament reinforced skin which is gentle on ship hulls and does not exert high localised pressures like fenders fitted with chain/tyre nets.
Many standard and custom sizes are available using regular, high energy or low reaction foam grades.
Sea Guard fenders can be made in almost any colour. They are unsinkable and virtually indestructible. Low maintenance and long service life make Sea Guard fenders the preferred choice of commercial and navy customers.
Features
* Standard and custom sizes
* Regular, high energy and low reaction options
* Use suspended or floating
* Virtually indestructible
* No chain/tyre net required
* Any colour, all non-marking
* Unsinkable design
|
|
Submarines and other vessels that contact fenders below the waterline require a unique solution. Hydro-pneumatic fenders are specially adapted to this application. The fender body is partially water-filled, then pressurised with air and ballasted to make it stand vertically. Fender draft and performance can be tuned by altering the water:air ratio and the inflation pressure.
Features
* Sub-surface contact face
* Very low hull pressure
* Variable draft
* Prevents accoustic tile damage
|
|
Unit Elements are high-performance, PIANC Type Approved modular rubber fenders. Elements are versatile and can be combined in unlimited combinations of length and direction.
The simplest Unit Element system is the UE-V fender, with pairs of legs and a UHMW-PE non-marking shield. For heavy duty applications Unit Elements are combined with a steel panel (frame) which can cope with belting, bow flares, low hull pressures and high tides.
Features
* PIANC Type Approved
* Versatile modular system
* Highly efficient shape
* Symmetrical or asymmetrical fixings
* Strong in lengthwise shear
* Easy to install
* Low maintenance
|
|
Arch fenders are simple and rugged, providing reliable and trouble-free service for a wide variety of berths even under the most severe conditions. The AN-fender is a traditional rubber-faced unit whilst the ANP-fender can be fitted with either UHMW-PE face pads or connected to a steel panel.
Features
* Simple one-piece design
* Strong and hard wearing
* Excellent shear performance
* Large range of standard sizes
|
|
|
|
|
|
|
Fender Bars can resist high impacts and are suitable for a wide range of general purpose applications. They are available in three different versions:
* ML-type for exposed locations
* MLS-type for low reaction
* Delta PU for visibility and non-marking
ML Fender Bars
The ML Fender Bar are intended for heavy duty applications – everything from ferry berths to bumpers on barges. The vulcanised internal steel plate provides very strong fixing points and reduces bending moments in the bolts.
MLS Fender Bars
MLS Fender Bars have a special modified profile to reduce reaction forces and allow a high degree of flexibility in all directions. Being softer, MLS Fender Bars are ideal for protecting smaller workboats, pontoons and load-sensitive structures.
Delta PU Bars
The Delta PU Bar meets the challenges of berthing light craft with aluminium or GRP hulls by combining high performance and low friction properties in a competitively priced unit. Available in highly visible, non-marking colours, the Delta PU Bar can also improve safety or demarcate berths and danger areas.
|
|
Super Cones are the latest generation of 'cell' fender, with optimal performance and efficiency. The conical body shape makes the SCN very stable even at large compression angles, and provides excellent shear strength. With optional overload stops the Super Cone is even more resistant to over-compression.
Features
* Highly efficient geometry
* No performance loss even at large berthing angles
* Stable shape resists shear
* Wide choice of rubber compounds
|
|
Fentek Cylindrical Fenders have protected ships for more years than any other fender type. Cylindrical fenders are simple and versatile as well as being easy to install. Their progressive reaction makes them ideal for berths serving large and small vessels. The wide range of available sizes (and almost any intermediate size) means Cylindrical fenders can be closely matched to each application.
Features
* Simple and economical design
* Easy to install and maintain
* All sizes up to 2700mm diameter
* Thick wall resists wear and tear
* Progressive load-deflection curve
|
|
Extruded fenders are simple rubber profiles, usually attached by bolts to the structure. Extrusions can be made in virtually length then cut and drilled to suit each applicaiton. Pre-curved sections and special sizes are available on request. Usually black, extruded fenders can optionally be supplied in creamy white.
Features
* Wide range of standard sizes
* Almost any length
* Various fixing methods
* Simple, robust design
* Special pre-curves available
* Black or creamy white
|
|
On high performance systems, fender panels are just as important as the rubber units. That's why every Fentek panel is purpose designed using structural analysis prograsms and 3D CAD modelling for optimum strength.
Fender panels distribute reaction forces to provide low hull pressures and cope with large tidal variations. They can also be designed to resist line loads from belted ships, or even point loads in special cases. Optional lead-in bevels reduce the snagging risk, whilst brackets (where required) provide highly secure connection points for chains.
Features and options
* Closed box steel structure
* Internal structural members
* Blind boss fender connections
* Pressure tested for watertightness
* C5M modified epoxy paint
* Polyurethane topcoat (RAL5005 blue)
* Studs for UHMW-PE face pads
* Chain brackets
* Lifting points
* Lead-in bevels and chamfers
|
|
Parallel Motion technology can reduce reaction forces by up to 60% compared with traditional designs. The panel always remains vertical but can cope with large berthing angles – even at 20° there is usually no loss in energy absorption.
Features
* Ultra-low reaction
* Non-tilt front panel
* No performance loss at large berthing angles
* Easy and fast to install
* Minimal maintenance
|
|
Wheel fenders are widely used on exposed corners to help ships manoeuvre into berths and narrow channels such as locks and dry-dock entrances. The main axle slides on bearings and the wheel reacts against back rollers to provide high energy and minimal rolling resistance, whilst the stainless steel and composite Trelleborg Orkot® bearings are almost zero maintenance.
Features
* Highest energy absorption
* Very low rolling resistance
* Use singly or in multiple stacks
* Composite and stainless steel bearings
* Low maintenance casing design
|
|
HD-PE Sliding Fenders are the ideal alternative to timber facings, with the additional advantages of high wear resistance and low friction. HD-PE does not split or decay and is totally resistant to borers.
Environmentally friendly, HD-PE can be used instead of faster-wearing tropical hardwoods, and can be fully recycled at the end of its useful life.
Features
* Low friction coefficient
* Resists marine borers
* High abrasion resistance
* UV and ozone resistant
* Does not rot, crack or split
* Easy to cut and drill
* 100% recyclable
|
|
Fentek FQ1000 ultra high molecular weight polyethylene (UHMW-PE) is the first choice material for facing steel fender panels and other heavy duty applications. It combines very low friction with excellent impact strength and a wear resistane much greater than steel.
Most popular is FQ1000DS – a 'double-sintered' and work-hardened material for extra durability, which is normally supplied in black. FQ1000V 'virgin' grade comes in yellow, white, grey, blue, green or red.
FQ1000 UHMW-PE materials are compounded to resist ozone and UV radiation. They do not degrade or rot and are easily recycled at the end of their useful service life.
Features
* Very low friction coefficient
* Excellent abrasion resistance
* UV and ozone resistant
* Does not rot, split or crack
* 100% recyclable
|
|
Trellex V-fenders fulfil the need for a simple, and maintenance-free fender system with high performance and a robust design at low costs. All V-fenders use one or several pairs of MV-elements and a front shield. The shield is a structural component of the fender, directly bolted to the MV‑element and easily able to withstand constant use in busy harbours.
The UHMW-PE face is also very gentle on ships. It will conform to the contours of the hull, will not mark paint (unlike rubber) and does not spark. UHMW-PE has very low friction which reduces stresses in the V‑fenders and fixings.
Features
* Modular design system
* Many standard sizes
* High performance geometry
* Recessed fixings
* Long life, low maintenance
|
|
Pneumatic fenders are ideal for permanent and semi-permanent port applications and for offshore ship‑to‑ship transfers. They are supplied in a wide range of sizes and in standard or high-pressure versions. Smaller fenders can be supplied as Hook type. Larger fenders are commonly fitted with a chain-tyre net (CTN) for added protection. For navy ships, a grey body is also available.
Features
* Easy and fast to deploy
* Very low reaction and hull pressure
* Suitable for small and large tidal ranges
* Maintains large clearances between hull and structure
|
|
| ... products without information |
| |
|
|