|
|
The pump and all piping and valves are located within the base of the toilet. Under operation, the toilet utilizes its own pump to remove the waste and send it towards the sewage unit or holding tank. The toilet%u2019s operation is very quiet and does not require any additional macerator system because the solids are broken down with the toilet%u2019s own sheer pump. The toilet requires ½ gallon per flush and is able to pump the fluid 15%u2019 vertically and 150%u2019 horizontally. The toilet utilizes small bore discharge piping (1 ¼%u201D) reducing the typical piping space requirements as well as installation cost. Because the toilet has the ability to pump the fluid vertically, this allows the toilet to be installed below the sewage unit or holding tank inlet.
Available Models
The toilets are available in (3) different models to suit any marine application from crew boats, workboats, sport fisherman to mega yachts.
|
|
Evac Classic vacuum toilet
Evac Classic in an innovative new model designed for cargo vessels and passenger vessel crew cabins combining superior functionality with great design.
Evac Classic is fully pneumatic with extremely effective one-nozzle flush technology with flushing mechanism integrated in the push button. It is very reliable vacuum toilet with only a few moving parts.
All the components are simple and reliable matching with all rival models in terms of functions and sound levels. Maintenance of Evac Classic is easy, time-saving and cost effective. Also the price is competitive.
|
|
|
The Hamworthy vacuum flush toilet has been designed to be mechanically simple, operationally reliable and stylish in appearance. It uses air to drive waste through the toilet and vacuum piping to the treatment tank or intermediate collection tank.
|
|
Evac 900 and Evac 910 vacuum toilets
Evac 900, made of finest porcelain with luxurious Prestige seat and cover, was designed for big luxury cruise liners. Evac 900 is proven to be the best vacuum toilet with its two models, floor and wall, and with its silent sound. The new Prestige seat can withstand 280 kg, and is resistant to cigarette burns and scratches.
Evac 900 has the proven Evac pneumatic flush mechanism, with flush memory and vacuum sensor technology. Its water consumption is low and it, as well as the flushing time, can be adjusted. There are no overflows, backflows or unflushed toilet bowls after temporary loss of vacuum. Tested life time of Evac 900 is more than 300.000 flushes.
|
|
Evac 90, Kandre, floor model, stainless steel vacuum toilet
Evac 90 Kandre, with shock and vibration proof design, has been developed for navy/military use. It is equipped with proven fully pneumatic Evac 900 mechanism with flush memory and vacuum sensor technology. For spare parts Evac grants a lifetime support. Evac 90, Kandre, has passed the MIL-SPEC 901D (Navy) Grade B, Class 1, Type A shock test.
|
|
Evac OnlineFlex
The Evac OnlineFlex pump family is a combination of proven "old" and innovative "new" technologies in a compact package. With the eight different OnlineFlex configurations we can secure a safe vacuum creation.
The OnlineFlex pumps are designed to create and maintain constant vacuum in a vacuum toilet in a vacuum toilet system with robust mechanical components. Intermediate tanks are not needed. The Flex family is a second generation range of Evac Online vacuum units for ships. The concept was specially designed to increase the installation flexibility without compromises.
Advantages:
-Flexible installation and operation
- Robust "plug and play" design
- Small footprint
-Silent
- Evac Speed Boots models with soft start
|
|
|
Removes stains and water deposits from bowls quickly and easily .Safe and easy to use .Excellent for all plastic and china bowls .Specially formulated for marine heads .Will not damage seals or valves .Contains no harsh chemicals .Kills odors -Ieaves bowl fresh and clean .No hard rubbing or scrubbing required .Will not interfere with the action of most holding tank treatments
|
|
Contains activated carbon filter material
that removes unpleasant odors.
Keeps your boat smelling clean and fresh.
- Each filter is good for an entire boating season.
- Vent Filter overall length is 15 5/8".
|
|
Codice prodotto: HPSN0002 / HPSN0003 / HPSN0004 / HPSN0005
In 2005 a new line of wastewater tanks was added to the product line of SIC Divisione Elettronica.
Certified in compliance with ISO 8099
- The tanks are made in 55, 77, 160 and 207 l main versions but can be customized %u2013 OEM solutions - to fit the customer%u2019s exact specifications.
- The wastewater tanks are made of extra strong metallocene (mMDPE) polyethylene with superior mechanical properties.
- The tanks are resistant to solvents, acids and other surface-active agents.
- They withstand high pressures. These tanks were tested under the pressure that by far exceeded resistance requirements.
- The tanks come complete with all the necessary accessories and a new capacitive electronic level sender of the highest quality and measurement precision.
- They are light-weight
- They are certified to comply with all the strictest requirements of ISO 8099 Safety Standard
- These tanks undoubtedly offer the best value available.
|
|
|
|
|
|
|
The unique Smart Switch Deluxe Programmable Toilet Control was designed for all electric marine toilets with remote, fresh or salt water flushing supply via an inlet pump or water solenoid valve. The stylish control panel provides fully automatic programmed flushing when the auto touch pad is pushed or provides
independent operation of the inlet or discharge pumps for maintenance or line clearance when the manual touch pads are used.
In-built troubleshooting features and toilet pump protection are standard. Other features include automatically sensing your vessels supply voltage and self-adjusting to suit 12, 24 or 32-volt systems, protection from radio interference and ZERO current draw.
With the built in intelligence this device will sense for toilet blockage, overheating, pump and valve short circuit, & pump open circuit, automatically cut off and display an error code protecting your complete system.
This Model is truly versatile with two different timing sequences built in. This feature is user program selectable ( Change modes in a flash).
Easy Installation and easy operation, the switch control panel comes in either Black, White, Brushed Stainless Steel or Polished Brass making this an attractive product to suit most needs.
As with all Smart Switch products, the Deluxe Toilet Controller employs State of the Art Microcomputer Technology. This, and the fact it is completely encapsulated in silicon, protecting the electronic components from the harsh marine environment, guarantee long-term life & reliability.
|
|
The unique Smart Switch Programmable Toilet Controller was designed for all electric marine toilets with a single motor/pump flushing system. The stylish control panel provides fully automatic programmed flushing when either button is pushed.
This unit features a Full and Half Flush cycle providing for a water / holding tank save mode.
Features includes automatic voltage sensing as well as 'Over Voltage' 'Over Temperature' 'Short Circuit' 'Over Current Protection' and 'Open Circuit Detection'.
Easy Installation and easy operation the switch control panel comes in either Black, White, Brushed Stainless Steel or Polished Brass making this an attractive product to suit most needs.
This product employs State of the Art Microcomputer Technology and is completely encapsulated in silicon protecting the electronic components from the harsh marine environment insuring long-term life & reliability
|
|
Features:
- Extra heavy duty white sanitary hose is manufactured for Jabsco by America‘s market leader in sanitation hose.
- Specially compounded to resist odour permeation.
- Lower cost, higher quality.
- Smooth white vinyl.
- Hard PVC helix for good flexibilityand bend radius.
- FDA approved for potable (iedrinking) water.
- Ideal for unpressurised freshwater tankfilling and ventilation hose lines.
- Can be used for bilge and generalpurpose applications whereappearance is important.
- Available in 3 sizes for manualtoilet discharge, electric toiletdischarge, and matching inletpipework.
|
|
| ... products without information |
| |
Macerator Pump
The TA3P10-19 macerator pump takes care of toilet waste. A rotary cutter shreds waste before it is pumped into or out from the holding tank. The pump should be connected as close as possible to the holding tank discharge outlet or the bowl discharge outlet. Note! Use unbleached lavatory paper only.
|
|
The sewage pump M is a self-priming diaphragm pump. It works without a macerator. Even bigger solids can be conveyed without damaging the pump because of the lip valves which have been installed. The self-locking valves make the pump non-reactive, i.e. it can be mounted to the side standing, hanging or sideways. The intake and discharge bent is revolving. This is necessary for better connecting possibilities of the suction and pressure hoses. The suction and pressure connections usually go from left to right. They can easily be changed, if the suction way should go from right to left or from the bottom to the top. All parts which come into contact with water can be ordered in red brass or aluminium. The pump can be delivered with a 12 V or 24 V motor.
Continuous operation 1 – 2 hours max.
Attention: The cross section of the pipe should never be less than 1 ½”/ 38 mm – or the pump capacity will not be achieved.
|
|
|
The Rheinstrom sewage pump FS 370 is a big, very hard wearing macerator pump which is suitable for continuous operation. It is not self-priming and therefore it must be installed either at the lowest part of the tank or lower than the tank itself. A macerator which chops up the conveying means is mounted in front of the pump. In case maintenance has to be carried out the pump’s body can easily be taken apart. In contrast to the sewage pump F the sewage pump FS 370 is suitable for continuous operation. Sewage tanks up to a size of 1 m³ are ideal for this pump.
|
|
|
|
|
|
|
WASTE EVACUATION
The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation
It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.
FISH BOX AND LIVEWELL TANK EVACUATION
The Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.
Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.
|
|
|
SHURflo’s Macerator pump is designed specifically for sanitation waste and fish box evacuations providing superior performance in harsh marine environments.
|
|
|
SHURflo’s Macerator pump is designed specifically for sanitation waste and fish box evacuations providing superior performance in harsh marine environments.
|
|
- Self-priming to a lift of six feet
- Flow rate to 6-1/2 gallons per minute
- Rated for continuous duty cycles of up to 1/2 hour ofuninterrupted pumping time (nearly 200 gallons ofsewerage transfer per cycle)
- Motor meets USCG regulation 183.410 and ISO 8846MARINE for ignition protection
- Motor is EMC compliant and CE marked
- Ports accept 1-1/2" hose with room for double bandclamps
- All pump components (non-flexible) are non-corrosiveplastic, stainless steel and bronze
- Diaphragm is made of Santoprene and the valves aremade of nitrile
- Pump housing is made of glass filled nylon
- The motor and gear drive are painted with a durableprotective coating
- A plastic motor splash guard adds additional protection
|
|
|
SANISPLIT is an automatic soil and waste water pumping unit, which collects the water from the kitchen and bathroom and pumps it into the collection tanks, even without the necessary gradient. SANISPLIT includes a powerful and silent centrifugal pump controlled by a pressure switch, which starts the pump as soon as the water arrives in the unit's collection tank.
|
|
|
|
see the results for the following category : 
