|
|
|
R&M sanitary modules represent very good quality, fancy design and innovative technology. A wide range of applicable materials and surfaces guarantees perfect customer fulfilment. Combinations of steel, aluminium and stainless steel construction elements with high-quality tiles, marble and granite surfaces are as well possible as simple sandwich construction with decorative PVC surfaces or decorative epoxy resin coatings. Likewise elements made of FRP and mineral cast can be used. There is no limit in the choice of installation elements made especially according to customer requirement such as partitions, shower partitions, cabinets, lights and all kind of equipment.
|
|
|
Bathroom for cruise liner Crystal Symphony built at STX Europe, Turku, Finland
|
|
|
|
|
|
|
The cabin module is a spacious construction, for accommodation of the crew members and ship passengers. The construction of the cabin module is designed for easy transport and installation on board. It's suitable for quick connecting to water, electrical, ventilation and air conditioning installations.
The module cabin system is a perfect solution for passenger vessels, and passenger-car carriers. It is also an alternative solution while building superstructures for ships operated by numerous crew such as drilling platforms and other off-shore units.
The cabin module is a frame construction. Walls, ceilings and doors of the cabin are made of galvanized steel, and covered with decorative PVC foil or lacquer coating, and insulated with mineral wool. The cabin module is equipped with:
-1. Sanitary cabin ( configured according to customer's wishes )
- 2. Furniture - Assortment and standard depends on type of cabin, and customer's requirements
3. Light installation and other, according to requirements
|
|
Options and configurations are endless. From basic functionality to ultra high-end facilities, we can meet your needs.
Infinite Options %u2013 We provide basic configurations for commercial vessels as well as custom models for passenger vessel applications. A wide variety of materials are available, including: tile, stone, vinyl, paper, glass, and plastic.
Quality Products %u2013 We use only the highest quality materials to create each unit, giving special attention to the wet conditions specific to a bathroom.
Ease of Installation %u2013 Modular toilets are delivered to the vessel complete in all respects, including electrical, piping and ventilation. Final hookup is accomplished outside each unit. This removes many of the shipboard problems associated with traditional T/S installation in reduces schedule impacts.
|
|
When considering prefabricated wet modules on board a ship, offshore living
quarters or even in a building on shore, quality is a key word in every respect.
The units from Norac are produced according to the most stringent methods
and with an undisputable focus on quality in even the smallest details. A bathroom shall not only be of a durable construction with minimum maintenance
cost, but also be a room where the user feels comfortable.
|
|
|
|
|
|
|
Parmarine Ltd's ready-to-install bathrooms, shower units, combined toilet and sauna units are a first-rate solution for apartment blocks, terraced houses and hotels. The prefabricated premises are excellent also for hostels, nursing homes and hospital wards.
Parma Bathrooms are custom-made with product assemblies meeting the client's wishes and in compliance with individual designs. Parma Bathroom is the only wet room assembly in Finland with the type approval from the Ministry of the Environment and certified by the Technical Research Centre of Finland (VTT). From countries outside the EU, in Norway our bathrooms have been granted a respective certificate. Hereby Parmarine Oy takes the overall responsibility for the quality of deliveries and observance of mandatory regulations.
Parma Bathrooms are delivered on site at the agreed date as completely ready-to-use wet room units, with all the furnishings, fittings and HEPAC equipment installed. The time-consuming work stages, which require on site professional skills and effort are transferred under the controlled conditions of the factory. This accelerates the completion of construction, contributing thereby to earlier release of bound equity and reduction of risks during the construction period.
In element-framed structures Parma Bathrooms are installed from the top in conjunction with the work of the structural frame; in cast-in-situ frames by leading into the structure from the side prior to the installation of facades. With both solutions the appropriate installation equipment is delivered for use on site.
|
|
|
|
|
|
|
The cabin is a very important part of the cruise experience for passengers and directly affects the productivity of an offshore installation's crew. ALMACO%u2019s new cabin concepts are carefully created and developed on the basis of owners%u2019 requirements.
ALMACO delivers modular cabins, wet units, and balconies for all types of passenger ships and offshore installations. Modern production equipment and a wide range of materials enable us to offer our customers customized turn-key solutions to suit each specific project.
Modular cabins and bathrooms have several advantages: reduced installation time, better installation conditions, economies of scale applied to manufacture, complete system supply and installation from the same source.
As a system supplier, ALMACO offers complete services from design to installation and commissioning. Our spare part services and total conversion management guarantee lifetime functionality and productivity of the cabin areas.
ALMACO works in close cooperation with major, high-quality equipment manufacturers around the world and is constantly looking for the best products and latest solutions in order to measure up to the customer's expectations.
|
|
|
LUBMOR Sp. z o.o. manufactures sanitary units (bathrooms) for shipbuilding industry and for construction. They are made as self-contained rooms with outlets for water, sewage and electricity. The sanitary units are executed according to orderer%u2019s wishes in variety of shapes, sizes and equipment. The walls of sanitary units can be covered with ceramic tiles, marble or PVC foil in various colours. The company offers sanitary units with a shower, bath-tube, intermediary or for disabled.
|
|
WAS - a technically superior solution
WAS bathrooms are always built with first-class materials. The galvanized steel wall panels can be tiled or coated with PVC film, and the steel base withstands vibration exceptionally well. The floor can be provided with underfloor heating. Additionally, all piping and electrical connections are tested at the factory before delivery.
Tailor-made designs
The WAS bathroom is an ideal solution for the owner and the shipbuilder. The owner benefits from a comfortable bathroom that is always a practical and functional integrated unit. Each detail of the bathroom module is individually designed so that the customer's wishes are met. The versatile range of models and the choice of materials and colors allow for this possibility. For the shipbuilder, WAS bathrooms fulfill the requirements of the most advanced construction techniques.
|
|
WAS - the advantages of building with modules
WAS bathrooms are locked and sealed and delivered as complete units. All electricity and plumbing line connections are located in the service area on the corridor side, so that any required maintenance work can be done outside the cabin without disturbing any occupants.
WAS - tried and tested for sound insulation and fire safety
All the solutions used in WAS bathrooms have been thoroughly tested beforehand. In terms of fire safety and sound insulation they meet or exceed all the regulations set by classification societies and other regulatory bodies.
|
|
| ... products without information |
| |
|
R&M sanitary modules represent very good quality, fancy design and innovative technology. A wide range of applicable materials and surfaces guarantees perfect customer fulfilment. Combinations of steel, aluminium and stainless steel construction elements with high-quality tiles, marble and granite surfaces are as well possible as simple sandwich construction with decorative PVC surfaces or decorative epoxy resin coatings. Likewise elements made of FRP and mineral cast can be used. There is no limit in the choice of installation elements made especially according to customer requirement such as partitions, shower partitions, cabinets, lights and all kind of equipment.
|
|
|
Bathroom for cruise liner Crystal Symphony built at STX Europe, Turku, Finland
|
|
|
|
|
|
|
The cabin module is a spacious construction, for accommodation of the crew members and ship passengers. The construction of the cabin module is designed for easy transport and installation on board. It's suitable for quick connecting to water, electrical, ventilation and air conditioning installations.
The module cabin system is a perfect solution for passenger vessels, and passenger-car carriers. It is also an alternative solution while building superstructures for ships operated by numerous crew such as drilling platforms and other off-shore units.
The cabin module is a frame construction. Walls, ceilings and doors of the cabin are made of galvanized steel, and covered with decorative PVC foil or lacquer coating, and insulated with mineral wool. The cabin module is equipped with:
-1. Sanitary cabin ( configured according to customer's wishes )
- 2. Furniture - Assortment and standard depends on type of cabin, and customer's requirements
3. Light installation and other, according to requirements
|
|
Options and configurations are endless. From basic functionality to ultra high-end facilities, we can meet your needs.
Infinite Options %u2013 We provide basic configurations for commercial vessels as well as custom models for passenger vessel applications. A wide variety of materials are available, including: tile, stone, vinyl, paper, glass, and plastic.
Quality Products %u2013 We use only the highest quality materials to create each unit, giving special attention to the wet conditions specific to a bathroom.
Ease of Installation %u2013 Modular toilets are delivered to the vessel complete in all respects, including electrical, piping and ventilation. Final hookup is accomplished outside each unit. This removes many of the shipboard problems associated with traditional T/S installation in reduces schedule impacts.
|
|
When considering prefabricated wet modules on board a ship, offshore living
quarters or even in a building on shore, quality is a key word in every respect.
The units from Norac are produced according to the most stringent methods
and with an undisputable focus on quality in even the smallest details. A bathroom shall not only be of a durable construction with minimum maintenance
cost, but also be a room where the user feels comfortable.
|
|
|
|
|
|
|
Parmarine Ltd's ready-to-install bathrooms, shower units, combined toilet and sauna units are a first-rate solution for apartment blocks, terraced houses and hotels. The prefabricated premises are excellent also for hostels, nursing homes and hospital wards.
Parma Bathrooms are custom-made with product assemblies meeting the client's wishes and in compliance with individual designs. Parma Bathroom is the only wet room assembly in Finland with the type approval from the Ministry of the Environment and certified by the Technical Research Centre of Finland (VTT). From countries outside the EU, in Norway our bathrooms have been granted a respective certificate. Hereby Parmarine Oy takes the overall responsibility for the quality of deliveries and observance of mandatory regulations.
Parma Bathrooms are delivered on site at the agreed date as completely ready-to-use wet room units, with all the furnishings, fittings and HEPAC equipment installed. The time-consuming work stages, which require on site professional skills and effort are transferred under the controlled conditions of the factory. This accelerates the completion of construction, contributing thereby to earlier release of bound equity and reduction of risks during the construction period.
In element-framed structures Parma Bathrooms are installed from the top in conjunction with the work of the structural frame; in cast-in-situ frames by leading into the structure from the side prior to the installation of facades. With both solutions the appropriate installation equipment is delivered for use on site.
|
|
|
|
|
|
|
The cabin is a very important part of the cruise experience for passengers and directly affects the productivity of an offshore installation's crew. ALMACO%u2019s new cabin concepts are carefully created and developed on the basis of owners%u2019 requirements.
ALMACO delivers modular cabins, wet units, and balconies for all types of passenger ships and offshore installations. Modern production equipment and a wide range of materials enable us to offer our customers customized turn-key solutions to suit each specific project.
Modular cabins and bathrooms have several advantages: reduced installation time, better installation conditions, economies of scale applied to manufacture, complete system supply and installation from the same source.
As a system supplier, ALMACO offers complete services from design to installation and commissioning. Our spare part services and total conversion management guarantee lifetime functionality and productivity of the cabin areas.
ALMACO works in close cooperation with major, high-quality equipment manufacturers around the world and is constantly looking for the best products and latest solutions in order to measure up to the customer's expectations.
|
|
|
LUBMOR Sp. z o.o. manufactures sanitary units (bathrooms) for shipbuilding industry and for construction. They are made as self-contained rooms with outlets for water, sewage and electricity. The sanitary units are executed according to orderer%u2019s wishes in variety of shapes, sizes and equipment. The walls of sanitary units can be covered with ceramic tiles, marble or PVC foil in various colours. The company offers sanitary units with a shower, bath-tube, intermediary or for disabled.
|
|
WAS - a technically superior solution
WAS bathrooms are always built with first-class materials. The galvanized steel wall panels can be tiled or coated with PVC film, and the steel base withstands vibration exceptionally well. The floor can be provided with underfloor heating. Additionally, all piping and electrical connections are tested at the factory before delivery.
Tailor-made designs
The WAS bathroom is an ideal solution for the owner and the shipbuilder. The owner benefits from a comfortable bathroom that is always a practical and functional integrated unit. Each detail of the bathroom module is individually designed so that the customer's wishes are met. The versatile range of models and the choice of materials and colors allow for this possibility. For the shipbuilder, WAS bathrooms fulfill the requirements of the most advanced construction techniques.
|
|
WAS - the advantages of building with modules
WAS bathrooms are locked and sealed and delivered as complete units. All electricity and plumbing line connections are located in the service area on the corridor side, so that any required maintenance work can be done outside the cabin without disturbing any occupants.
WAS - tried and tested for sound insulation and fire safety
All the solutions used in WAS bathrooms have been thoroughly tested beforehand. In terms of fire safety and sound insulation they meet or exceed all the regulations set by classification societies and other regulatory bodies.
|
|
| ... products without information |
| |
|
Suitable for barefoot use in showers and toilets
|
|
|
|
