|
|
DMA Sorp-Line system for fine filtration of oily water and upgrade of existing separator performance is mainly used for bilge water polishing onboard ships and oil rigs applied between the already existing oily water separator and the oil discharge monitor. However the DMA Sorp-Line filters can be applied to almost any off shore or industrial operation where oil polluted water is the problem. The system is type approved by Lloyd Register and approved by Danish Maritime Authorities
Specifications:
Our filter containers represent the latest state of the art design in stainless steel 316 L with small footprint and low weight as well as an easy lid opening without use of tools.
Number of filter inserts: 1-6
Flow rates: 1000-5000 l/hour
Footprint: 250x250-370x370 mm
Material: 316L stainless steel
Temperature: 110 degrees C maximum operation
Liquid pressure: 6-10 bar maximum operation
Gas pressure: N/A
Closure: Cast Vee clamp
Finish: Electro polished inside and out
Gasket: Ethylene Propylene
|
|
DMA Sorp-Line system for fine filtration of oily water and upgrade of existing separator performance is mainly used for bilge water polishing onboard ships and oil rigs applied between the already existing oily water separator and the oil discharge monitor. However the DMA Sorp-Line filters can be applied to almost any off shore or industrial operation where oil polluted water is the problem. The system is type approved by Lloyd Register and approved by Danish Maritime Authorities
Specifications:
Our filter containers represent the latest state of the art design in stainless steel 316 L with small footprint and low weight as well as an easy lid opening without use of tools.
Number of filter inserts: 1-6
Flow rates: 1000-5000 l/hour
Footprint: 250x250-370x370 mm
Material: 316L stainless steel
Temperature: 110 degrees C maximum operation
Liquid pressure: 6-10 bar maximum operation
Gas pressure: N/A
Closure: Cast Vee clamp
Finish: Electro polished inside and out
Gasket: Ethylene Propylene
|
|
|
NEW combo line GPS chartplotter/fish finder with built in 600 Watt dual frequency fish finder (not need SD Fish pro black box)
|
|
|
NEW combo line GPS chartplotter/fish finder with built in 600 Watt dual frequency fish finder (not need SD Fish pro black box)
|
|
|
|
|
|
|
Ship to ship, ship to shore, salvage and cliff rescue
The SeaSam heralds the arrival of a new generation of line throwers. Its unique turbo-powered second stage kinetic projectile system is able to carry substantially heavier payloads, with more accuracy, over much longer ranges than has previously been achievable by traditionally powered pneumatic launch systems.
SeaSam is designed to be launched from Restech PLT or shoulder launchable pneumatic line throwers and can deploy up to 100 metres when launched from a PLT fixed system.
Being non-pyrotechnic it is completely safe to use in all hazardous situations and is extremely simple to operate.
The additional payload range delivered by SeaSam has been achieved via the development of a revolutionary secondary stage thrust system. The additional range delivered makes it ideal for all types of uses in both the marine and emergency services sectors - and offers the opportunity for line thrower use to be considered in situations where it would not previously have been effective.
The SeaSam not only acts as the ideal payload delivery system to maximise the effectiveness of Sea Scorpion System's range of line-thrown safety and pollution control products but can also be used as a stand alone product to launch any payload
|
|
|
|
|
|
|
Woodfield Systems Limited%u2019s managing director, Richard Williams, says this co-operation heralds a new era of cost effective solutions for the loading arm market place: %u201CWe are very happy with our world-wide partners and the quality of their work. We have worked very hard and invested heavily in communication and experience transfer with our nominated construction houses, and as a result our design engineers have found working with the constructors to be easy and efficient.%u201D
Temperatures from -1640C to +2000C
The Woodfield range of Marine Loading Arms extend from 4%u201D dia. up to 24%u201D dia., for handling crude oil, refined products, slurries, chemicals, LPG, LNG and other cryogenic products. The equipment can cover operating temperatures from -1640C to 2000C.
Arms can be supplied as manual, hydraulic, electro-hydraulic with either hardwired or wireless remote control. Manually operated arms can be supplied with attachment brackets for the later addition of hydraulic operations. Operational limiting controls and other warning devices are available as optional extras. Woodfield Arms, although normally fixed in one jetty position, can be mounted on movable trailers or rail tracks to provide dockside flexibility.
Several types of quick connect/disconnect couplings are available for the full range of Loading Arms. An emergency disconnect coupling is also available as an operator initiated device or as part of a sequence controlled %u201Cshut down%u201D disconnect-system.
|
|
Electro-Tec Deck Line is a cost efficient unobtrusive solution to provide power or water to individual berths. Deck Line is installed into any pontoon system, new or existing, and provides an un-cluttered appearance. As Deck Line fits flush into the deck, it will not be prone to damage from buggies or vandalism for example. Deck Line is available in a number of variations such as 16A or 32A, ½" water or ¾" water and can be powder coated to offer a choice of colours.
Deck Line is manufactured from a heavy duty high grade 316 Stainless Steel and is supplied as standard with locks to prevent unauthorised use or disconnection of supplies. Protective devices (MCBs and RCDs) for the Deck Line socket are installed within the closest DU on a remote system.
|
|
|
|
