|
|
|
Need more room? Choose the 1200W. With an over-all width of 54" it's the widest seat in the house. Complete with all STIDD ergonomic and comfort features with the addition of a removable center armrest. Available in powder coat or deluxe finishes with your choice of upholstery for the helm or fly bridge.
|
|
The most comfortable marine bench seat you can buy! With an over-all width of 45” the Series 1200 “Second-Mate” delivers true side-by-side seating STIDD style. Plus, this bench can fit where two individual seats can’t - saving a full 13” in width compared to the space it takes to install a pair of seats. Available in powder coat or deluxe chrome finishes with your choice of upholstery for the helm or fly bridge.
|
|
The TRADEWINDS, a new downsized Helm Chair from Llebroc, is shorter and narrower, so that it can fit into smaller areas than full size seats.
It¹s built to withstand extremes in weather and punishing use year after year after year. And our AquaFlex suspension provides a level of absolute comfort you just can¹t find in other seats.
|
|
model 6487
This manual internal seat can also be adapted for external installation. It is the most futuristic of the new line with a low anatomic profile, armrests that are merely suggested and an open back. The upholstery is suggested with a contrasting two-tone leather.
|
|
model 6477
Is designed for both interior and exterior installation. Structured in stainless steel the seat can be either fixed or installed on sliding guides, has a low back and is available with or without armrests. Complete with custom upholstery in either top grain or synthetic leather this model can be coupled to create a sofa combination and may be installed (optional) with any of the bases displayed in our catalogue.
|
|
model 6594
Model 6594 can be manual or automatic and includes provisions for fixed or column installation. The armrests and back are folding and the upholstery on the headrest, seat and back has very stylish horizontal stitching. Power supply 24 V.
|
|
The all-purpose Slimline low back helm seat finished in tough baked-on powder coat provides all of the durability and comfort of our standard series in a trim 23-inch wide package. Available in your choice of colors for the helm or fly bridge.
|
|
Built with the same heritage as our US Coast Guard and military seats, but finished in deluxe polished chrome & stainless, STIDD Luxury Admirals are the benchmark of seaworthy opulence at the helm or topside.
Chrome & Stainless Package includes:
Chrome pedestal, chrome armrest hubs, chrome
folding footrest, and stainless "Trigonal" clamp handles.
|
|
Unmatched for quality and comfort 500XH luxury seats feature a signature high back with 3-position adjustable headrest. The stunning deluxe chrome & stainless finish accent the finest yacht interiors while reflecting the owner’s good taste.
Chrome & Stainless Package includes:
Chrome pedestal, chrome armrest hubs, chrome
folding footrest, and stainless "Trigonal" clamp handles.
|
|
Unmatched for quality and comfort 500NXH luxury seats feature a signature high back with 3-position adjustable headrest. Finished in deluxe polished chrome and stainless, 500NXH seats offer luxury accommodations for boaters tight for space.
Chrome & Stainless Package includes:
Chrome pedestal, chrome armrest hubs, chrome
folding footrest, and stainless "Trigonal" clamp handles.
|
|
The 800V53 Advanced Shock-Mitigating Seat features a Proprietary Suspension System that reduces chronic fatigue, orthopedic injuries and repetitive stress injuries associated with unpredictable extreme boat motions.
Features include:
· 7-inch Vertical Stroke inertial valve regulating Nitrogen Pressurized Taylor Shock Absorber with Accumulator and go-no-go status indicator.
· Two modes of operation: Seated or Standing.
Rapid conversion from seated to standing positions improves operator performance and passenger comfort.
Finish: Hard Coat anodized. Color: “Olive” Standard or Your choice of Powder coat color.
Upholstery: Hi-Tenacity Polyester – Color: “Black” or your choice of colors in either Naugahyde or Ultra-Leather.
· Common Suspension Frame
Modular design enables single deck-mounted, double deck-mounted and single bulkhead mounted configurations.
|
|
Slimline Series Seats (500NX)
Finished in deluxe polished chrome and stainless for the helm or bridge, 500NX Luxury Slimline seats are the perfect solution for applications where space is tight. When the right fit is everything choose Slimline - 5-inches narrower than standard series seats.
Chrome & Stainless package includes:
Chrome pedestal, chrome armrest hubs, chrome folding footrest, and stainless "Trigonal" clamp handles.
|
|
Wide Marine Seat (500W)
Here’s the perfect seat for boat owner’s who need some extra room. At 36” wide, the 500W is a full 8” wider than standard Series 500 seats. This roomy single pedestal seat is available in tough baked on powder coat or deluxe polished chrome finishes with your choice of upholstery for the helm or fly bridge.
|
|
Slimline Series Seats (500NH)
All of the space-saving Slimline features in a high back configuration. Finished in tough baked-on powder coat, these all-purpose 23-inch wide high backs look good while providing hours of comfort at the helm. Available in your choice of colors.
|
|
500 Series Seats (500-100)
Complete with all of the same features as our luxury high back seats, but finished in tough baked-on powder coat, these all-purpose high backs offer versatile comfort for mariners of all shapes and sizes.
|
|
Available in Slimline or Standard seat, including all 500 Series features and adjustments.
Choice of Low or High Back without headrest.
Massive 6 5/8 inch diameter shock-absorbing pedestal with nitrogen diaphragm shock.
10-position rebound damping adjustment.
Fixed 28 inch seat height with 4 inches of shock mitigating stroke.
Finish: D/A Aluminum – Standard or Your choice of Powder coat color.
Upholstery: Hi-Tenacity Polyester – Standard, Color “Black” or your choice of colors in either Naugahyde or Ultra-Leather.
Options include: Reinforced Arms and CRES Reel Harness System* (* available for Slimline high back configuration only).
|
|
500 Series Seats (500-200)
The all-purpose Admiral helm seat finished in tough baked-on powder coat. Available in your choice of colors for the helm or Flybridge, the original STIDD is still the best value in marine seating.
|
|
ULLMAN JOCKEYSEAT COMPACT
The Compact Seat is designed to fit in limited spaces.
Small footprint - takes up only marginally more space than the person seated in it. Horseshoe shaped handle - support for passengers sitting or standing behind. Extra padding on front of backrest. Zipped pouch for gear on backside of backrest. Available on molded bases in two different heights 750 mm and 810 mm All Ullman JockeySeats are designed to protect the rider from getting injured.
The seat design optimizes your body posture, while the spring and damping system takes care of the high forces during impact.
|
|
BLUEWATER DOUBLE HELM CHAIR WITH FLIP BOLSTER.
The perfect all weather seat for the fly bridge. With a contoured double flip bolsters to hold you in place during rough water.
|
|
|
Ladder back design with flip-up bolster for piloting from a sitting or standing position. Quilted seat and back cushions are padded with high-density foam treated to resist mold and mildew. Rugged hinge allows the bolster to flip up with ease. Ladder back frame and seat substrate constructed of high-density polyethylene. Cushions are covered with high quality marine grade vinyl.
|
|
Ladder back design with flip-up bolster for piloting from a sitting or standing position. Quilted seat and back cushions are padded with high-density foam treated to resist mold and mildew. Rugged hinge allows the bolster to flip up with ease. Ladder back frame and seat substrate constructed of high-density polyethylene. Cushions are covered with high quality marine grade vinyl.
Dimensions: No arm - 27" W x 21 H x 22-1/2" D
With arm - 35" W x 21" H x 22-1/2" D
|
|
Barracuda - with flip bolster - with suspension
The ultimate helm seat for your runabout, performance sport boat, pontoon or cruiser. This seat offers a high tech, stylish look with loads of comfort features. Ergonomic molded foam cushions. Frame is contructed with a rigid polyethylene roto-molded core. Upholstered with mildew, UV and stain-resistent marine-grade vinyl. Dual track flip-up bolster allows piloting from a sitting, standing or leaning position. Available without flip bolster and suspension.
|
|
|
Pilot seat P 216 "President" with electric automatical movements for sliding and seat lifting. Rotary of 180° and adjustable handoperated footrest.
|
|
Helm Chair Series I Seating
Llebroc Industries developed its Series I Helm Chair Seating line primarily for use in an enclosed helm with limited exposure to the weather. Each of the nine models in the Series I line offers an impressive list of features including:
Standard seating features:
Powder coated 1” square tube steel frame with recliner mechanism
Molded foam seat cushion
Molded foam armrests
Molded foam adjustable headrest (optional)
Morbern Allante vinyl upholstery (See Specifications Sheet on website under Information section)
Under seat bottom upholstery cover Universal aluminum mounting plate
24 month warranty
FREE SHIPPING in the United States
(Surcharge for Hawaii, Alaska and Canada. International orders have shipping calculated by weight)
A new fold down footrest is now available on the Series I seating package. By ordering the optional mounting plate, you can now add the Series II footrest to your Series I seat package.
|
|
Helm Chair Series I Seating
Llebroc Industries developed its Series I Helm Chair Seating line primarily for use in an enclosed helm with limited exposure to the weather. Each of the nine models in the Series I line offers an impressive list of features including:
Standard seating features:
Powder coated 1” square tube steel frame with recliner mechanism
Molded foam seat cushion
Molded foam armrests
Molded foam adjustable headrest (optional)
Morbern Allante vinyl upholstery (See Specifications Sheet on website under Information section)
Under seat bottom upholstery cover Universal aluminum mounting plate
24 month warranty
FREE SHIPPING in the United States
(Surcharge for Hawaii, Alaska and Canada. International orders have shipping calculated by weight)
A new fold down footrest is now available on the Series I seating package. By ordering the optional mounting plate, you can now add the Series II footrest to your Series I seat package
.
|
|
Helm Chair Series II Seating
Llebroc Industries developed its Series II Helm Chair Seating line for both indoor and outdoor use. Each of the three models in the Series II line offers an impressive list of features.
|
|
Helm Chair Series II Seating
Llebroc Industries developed its Series II Helm Chair Seating line for both indoor and outdoor use. Each of the three models in the Series II line offers an impressive list of features.
|
|
Helm Chair Series II Seating
Llebroc Industries developed its Series II Helm Chair Seating line for both indoor and outdoor use. Each of the three models in the Series II line offers an impressive list of features.
|
|
Helm Chair Series II Seating
Llebroc Industries developed its Series II Helm Chair Seating line for both indoor and outdoor use. Each of the three models in the Series II line offers an impressive list of features including:
STANDARD FEATURES INCLUDED on all Series II Helm Chairs
All aluminum construction
Constructed of 5052-H32 aluminum the entire unit is protected by a UV texture powder coat.
Seat comes standard with Ultra Leather material
Dual Positive lock seat back adjusters for greater flexibility
Multi Position Adjustable Arms for greater comfort.
Llebroc's AquaFlex Shock Mitigating System was designed specifically for boaters, and it comes standard with the The Series II Helm Chairs. This system is unique to the marine seating industry, and provides a level of comfort that, until now, was simply not possible. It ensures the ultimate in comfort and safety. It is a major advancement in the design of marine seating, and was developed exclusively by Llebroc industries - To learn more about AquaFlex click here
Made for Indoor or Outdoor marine use.
|
|
- Adjustable shell in hybrid construction made from steel and polymer materials
- Black leather / black, red, grey, blue, silver, beige dinamica upholstery
- Belt guide for 4-point belt system
- Firm upholstery gives the captain the right feel for the waves
- Strongly contoured shoulder support relieves muscle tension
- Well defined side bolsters for a firmer sitting position, offering support when the boat rolls
- Integrated, fully upholstered headrest for the best possible protection
- Backrest adjustment on both sides for simple, easy operation
- In combination with our air suspension, this seat is one of the best solutions for comfortable seating on fast boats
|
|
|
|
