|
|
| The Reverse Mount Display is the only one of its kind in the marine electronics industry. It is installed from behind the helm with no bezel showing. Only the image on the screen shines through for a very sleek and understated look. The Ultimate in flat displays. Wide viewing angle from SVGA to SXGA. Light levels range from 200 nits up to 1800 nits and are anti glare and anti scratch. Pilothouse, Daylight, Sunlight and Super Sunlight Brightness. Available in 12, 15, 17, 18, 20 and 23" sizes. No Buttons and No Bezel. 9 inputs...4 VGA 4 Composite 1 DVI. Unlimited inputs through the VEI SSIR Optional touch screen. Limited two-year warranty. Hand Made in the United States |
|
The 7000 Series manufactured in the USA in full compliance with International Regulations
- 3 sizes - 18", 20", 23"
- Brightness levels from 250-1000 nits
- Chemically hardened scratch proof glass
- Approvals, Certificates & Declarations of Conformity
- EN60945 (IEC60945)
- ABS- American Bureau of Shipping*
- DNV-Det Norske Veritas*
- LRS- Lloyd's Register of Shipping*
- BV- Bureau of Veritas*
- GL- Germanischer Lloyd*
- Hand Made in the United States
- Pending |
|
The DM Series Monitor - Designed with you in mind
On Screen Menu - user defined
No more scrolling through pages of unused sources
9 inputs, 4 VGA, 4 composite, 1 DVI
Scratchproof anti-glare glass
Available in Pilothouse, Daylight, Sunlight & SuperSunlight Brightness
Flexible and easy installation from the front!
Optional Touch screen
Cosmetic bezel available to match any helm color or design
Available in 12, 15, 17 and 20" sizes
Hand Made in the United States |
|
The Ultimate in flat displays
Wide viewing angle from SVGA to SXGA. Light levels range from 200 nits up to 1800 nits and are anti glare. Fully Sunlight readable to Pilothouse brightness. Available in 8, 12, 15, 18, 20 and 23" sizes. All sizes available in Reverse Mount...No Buttons and No Bezel 9 inputs...4 VGA 4 Composite 1 DVI. Optional touch screen. Limited two-year warranty. Hand Made in the United States |
|
The FURUNO MU-120C/155C are multi-purpose displays that feature the unmatched Furuno quality and reliability that you have learned to depend on. These 12" and 15" color monitors feature a wide range of interface
capabilities that will accommodate virtually all of your marine display needs.
Characteristics
- Crystal clear 12" and 15" monitors for use as main or remote displays
- Sunlight viewable with wide viewing angle allows comfortable viewing by more than one person
- Built-in scaler allows monitors to accept up to SXGA (1280 x 1024) resolution
- Waterproof, low profile unit allows for flush mount installation even in an open fly bridge
- Wide range of inputs: 2 RGB analog, 1 Digital Video Interface (DVI) and 3 NTSC/PAL
- Unique programmable video input names
- PIP function allows for displaying two images on the screen at the same time
- Easily control display with standard infrared remote |
|
The dedicated SEA 6606E and SEA 6606HF color LCD Display/Message Terminals offer the perfect choice for maritime communications installations, especially where space is limited. The large (10.4"), easy to read (640 x 480 resolution), flat-panel display contains a PC compatible 386SX-40MHz processor with 2MB RAM, 3.5" floppy drive, and operates from 10.5-32Vdc.
- Meets or exceeds Inmarsat-C CN114 specifications and IEC 1097/IEC 945 for full SOLAS/GMDSS installation
- Fully EMC and CE compliant
- Designed for maritime applications
- Operates from DC voltage
- 10.4" color TFT high-brightness flat-panel display
- 3.5" floppy disk drive
- 12 backlit soft-keys allow for easy operation
- Advanced light sensor ensures optimal lighting conditions day or night |
|
Our most powerful multifunction displays, Raymarine E-Series delivers chartplotter, fishfinder, radar, and video in an easy to use networked navigation system.
Featuring ultra bright displays, a customizable navigation interface, and super fast networking, E-Series sets the new standard for integrated marine electronics.
|
|
The perfect choice for mounting at the helm or on a center console, Raymarine's C70 puts the power of Multifunction Navigation into a single compact display. With inputs for GPS sensor, radar, HD Digital sounder module, SIRIUS Satellite Radio and Marine Weather, the C70 Multifunction Navigation Display is easily transformed into a navigation system that's just right for you.
Utilizing the latest LCD display technologies, the C70 is direct sunlight viewable with excellent contrast and a wide viewing angle. A high resolution 640 x 480 pixel transflective LCD panel with 256 colors makes for a crisp, clear picture that's visible under even the most challenging lighting conditions.
C70 supports Raymarine's SeaTalk and SeaTalk2/SeaTalkNG navigation networks for communication with instruments and autopilots. C70 also supports the industry standard NMEA 0183 and NMEA 2000 for integration with 3rd party electronics as well as electronic engine monitoring.
Rugged and waterproof, the C70 includes both a convenient trunion mounting bracket as well as a low-profile flush mounting kit for a clean, unobtrusive helm.
The Raymarine C70 kit comes with an owners manual, quick reference guide, full-face suncover, trunion mounting kit, flush mounting kit, NMEA input/output cable, power cable, and SeaTalk cable. |
|
32" MM Series Glass Bridge Display
The largest marine monitor available on the market in the world. All glass front no external bezel. Available in 1,200 NIT Sunlight readable and 500 NIT Pilothouse versions. 9 inputs 4 VGA 4 Composite 1 DVI standard. Unlimited inputs using the VEI SSIR Controller. 16 x 9 aspect ratio for true split screen operation. Waterproof when flush mounted. VEI Glare proof glass that cant be damaged by abrasive salt water or most harsh chemical cleaners. Innovative cooling system. 2 year warranty. |
|
VEI invented the Glass Bridge years ago. At VEI we go one step farther...VEI has a department dedicated to the fabrication of custom installations. We are able to design and manufacture the helm of your dreams. From idea to CAD drawing to fabrication our engineers will design an ergonomically perfect helm. You will receive an easy to install and easy to service state of the art masterpiece. We use only the finest marine grade aluminum - built to withstand the worst that the sea, saltwater and sun can throw at it.
We have the Glass Bridge integrated helm availble in all display sizes for any amount of displays with very short delivery times. Any of our Monitor sizes 8", 12", 15", 17", 20", 23 or 32" can be fitted into a GLASS BRIDGE HELM as shown on the included photo. The photo as seen has two VEI 17" displays joined together as one sleek unit. |
|
| Designed for navigation tasks. With 1600 x 1200 pixels, this high resolution monitor features a 23 inch TFT-color display for optimal display of electronic nautical charts and RADAR images. The monitor is approved for ECDIS and RADAR certification and features antireflective glass without touch for ideal daylight readout and has an IP65 front and IP20 back. |
|
When you are looking for the simplest lowest cost Panel mount LCD monitor, the LC series displays are your solution. Easy bolt in from the front mount.
A step up from the DM series the this LC-10 is the most basic of panel mount LCD monitors.. But incorporates a very high performance LCD so your screens will look great! |
|
Thin and low cost. Designed for the start for OEMs looking for something better then a gutted plastic monitor without going to a High End industrial LCD.
And, when space is a premium the 1.5" installed depth helps! Still standard is our "No Name" bezel as always, special colors and finishes are always available, along with Stainless Steel. |
|
Replacing our immensely popular FPM-180 series of 18" LCDs. The New FPM-191 takes Performance, Reliability and Flexibility to a new level.
The completely redesigned FPM-191 is 100% drop in compatible to the FPM-180. But we have also set a new performance mark for the standard unit.. IED has been a leader in the industrial 18" market since 1997, having shipped thousands of units. We believe that our new 19" will be the absolute market leader.
Building on a solid foundation. We have added flexibility beyond our expectations. |
|
The DT-15 series displays are ground up designed for industrial applications and environments. Rugged 14 gauge steel chassis are designed to take the daily abuse and dusty dirty environments. The front bezel is finished with a non glare flat black while the case is a semi gloss for easy cleaning. Our unique mounting is designed not to bounce during use of the Touch Screen, and will not move when subject to vibration and light impacts.
The base is a very sturdy 250" Thick Aluminum plate fitted with a closed cell foam non skid material that will not absorb liquids, and will not move when the touch screen is used. The base is predrilled so the unit can be permanently bolted down. A great feature when theft maybe a problem.
The DT-15 is standard with a very bright 450 nit high performance LCD with excellent viewing angel. |
|
The FPM-64 series of LCD monitors is our most compact LCD monitor. But not short on performance! Packing 640 x 480 pixels into a 6.4" LCD along with 2 backlight lamps results in a extremely bright razor sharp picture.
The FPM-64 Series of displays are rugged conventional panel mount design LCD monitors suitable industrial environments. Our pressed in stud design and a wide gasket area assure a tight seal to your control cabinet. The rear mounted screen controls eliminate tampering, and with AutoAdjust standard, screen setup is a one button procedure.
Our "No Name" Black bezel is perfect for OEM applications. If you need a special color or finish please ask, and Stainless Steel is also available. |
|
Fitted with a water tight compression gland the ENC-154 unit is ready to go.. Bolt it to a wall or machine and cable it up.. IED stocks cables to 50 Feet so most applications are covered.. With a 3B vertical grain.. it is perfect for food and pharmaceutical installations.
New features include a No Intervention SetUp.. On power up the unit adjusts itself to your computer providing you the ultimate on Plug and Play, and our new(er) slim chassis design.. only 3" deep. This design along with our "No Name" policy is perfect for OEM customers.
And, Standard Black Aluminum screens look great too and can save a lot of cost if Stainless is no necessary. |
|
The Starlight 15 Sun is a chartplotter with a separate keyboard and high brightness for high-end performances.
The use of this appliance is recommended for vessels of 12 m and more, particularly for users who want to integrate their chartplotter, Fish Finder and Radar all into one instrument.
The excellent visibility and the large dimensions of the monitor provide an effective usage, especially when installed in big indoor dashboards, which in this way can control the entire navigation |
|
Panel IPC with 17" TFT display without touch, shock-absorbing HDD 40 GB hard disk and fanless CPU technology for use in demanding industrial environments, the EPC T170 comes with Windows XP Professional Multilingual operating system.
Antireflective
With 1280 x 1024 pixels, this high resolution 17 inch TFT-display monitor features antireflective glass for ideal daylight readout. Flexible use and upgrade. Numerous communication ports and two built-in PCI expansion slot provide flexibility in your application and enables easy updating as well as data storage. The modular construction of the EPC means you can upgrade your screen without any major obstacles. |
|
| Panel IPC with 15" TFT touch display, shock-absorbing HDD 40 GB hard disk with fanless CPU technology for use in demanding industrial environments, the EPC T150 comes with Windows XP Professional Multilingual operating system. Flexible use and upgrade. Numerous communication ports and two built-in PCI expansion slots provide flexibility in your application and enables easy updating as well as data storage. The modular construction of the EPC means you can upgrade your screen without any major obstacles. |
|
Replacing our immensely popular FPM-180 series of 18" LCDs. The New FPM-190 takes Performance, Reliability and Flexibility to a new level.
The completely redesigned FPM-190 is 100% drop in compatible to the FPM-180.. But we have also set a new performance mark for the standard unit.. IED has been a leader in the industrial 18" market since 1997, having shipped thousands of units. We believe that our new 19" is the price / performance value leader.
Building on a solid foundation. We have added flexibility beyond our expectations. |
|
| ... products without information |
| |
| ... products without information |
| |
|
|
see the results for the following category
