|
|
Our trailers for sailing boats and keeled yachts are equipped with a keel support fixed on the frame which can be adjusted to ensure a good stability on the road, with 4 to 6 vertical support ended by rubber boards and also with an adjustable V-shape snubber on the front.
The lighting board is divided into 2 parts easily removable connected to a plug on the mudguard, avoiding connecting system to be in contact with salt water. "Keel adaptation for a draft of 0.80 m or more".
Trailers for catamarans are equipped on the sides with width- adjustable supports and a post support. The models T1V and T4V are used for sailing dinghys.
|
|
Trailers Aluminium 2 in 1
Light - for the small dinghies
a concept innovating guaranteed 3 years
boat lanching authorised
tubular aluminium structure H.R.
anti-corrosive protection by anodization
Large wheels of series 145/70 R 13
Autograissés tight bearings...
|
|
|
launching trolleys (not allowed to drive on the road) with a central axle of V-rollers for the range of CM, beach trolley for the range of "CO, CV", and low-loading trolleys equipped with 4 wheels and 4 hump blocks for the BD used for the storage of the boats.
|
|
OPTIMIST aluminium trolley
Aluminium Optimist trolley: Lighter than ref 3200, and easy to fit, seconds to remove, and take in your car chest. Better for top sailors
|
|
DINGHY galvanized trolley
galvanised steel trolley for all dinghies 3,50 m boat lenght 4,75 m (Equipe, Laser, 420, 470...) Very strong, with stainless steel wheel axles et screws
|
|
Launching trolley DER1
Dinghies Europe - Laser - Equipe - 420 ...
Chassis anodic aluminium
Bunk of protection stem
2 low pressure wheels
Adjustable and dismountable drawbar in 2 parts
Towing hitch & jockey big wheel (option)
Strap yellow adjustable
Support in « V » adjustable on drawbar
Overall length : 3m30
Length bearing hull : 2m90
Total width : 1m70
Width bearing hull : 1m50
Dismounted length : 1m50
Weight : 12kg
Launching trolley DER1L
Dinghies Europe - Laser - Equipe - 420 ...
Chassis anodic aluminium
Bunk of protection stem
2 low pressure big wheels
Adjustable and dismountable drawbar in 2 parts
Towing hitch & jockey big wheel (option)
Strap yellow adjustable
Support in « V » adjustable on drawbar
Overall length : 3m30
Length bearing hull : 2m90
Total width : 1m80
Width bearing hull : 1m50
Dismounted length : 1m50
Weight : 16kg
|
|
Launching trolley OPT1
Dinghies Optimist - Tender...
Chassis anodic aluminium
Bunks of yellow protection (good visibility)
2 low pressure wheels
Dismountable drawbar
Overall length : 1m95
Length bearing hull : 1m53
Total width : 1m55
Width bearing hull : 1m20
Dismounted length : 1m40
Weight : 8kg
Launching trolley OPT1L
Dinghies Optimist - Tender...
Chassis anodic aluminium
Bunks of yellow protection (good visibility)
2 low pressure big wheels
Dismountable drawbar
Overall length : 1m98
Length bearing hull : 1m53
Total width : 1m55
Width bearing hull : 1m20
Dismounted length : 1m40
Weight : 11kg
|
|
| ... products without information |
| |
KARVER K-Blocks (see KARVER K-Block & KARVER K-Block High Load) are available for dinghies and small catamarans.
Lashing block's advantages remain the same: safety, light weight, attachment and reduced noise.
KARVER K-Blocks for sailing dinghy have high resistance plastic and glass fibers cheeks; aluminium sheave; and Torlon bearings.
KARVER K-Blocks for sailing dinghy are available for safe working load going from 0.05 to 1 T; and for rope diameters up to 10 mm.
|
|
TECHNICAL
Sheave Dia : 57mm
Material : Acetal Resin
Cheeks : Acetal Resin
Axle : Aluminium (Hard Anodised)
|
|
RWO'S range of anodised aluminium fittings offer excellent strength, great rigidity, exceptional choice and are lightweight. We also offer electro polished stainless steel fittings and a range of reinforced nylon transom mounts.
Aluminium Rudder Fittings come in three widths with a choice of length and pintle diameter plus optional packing pieces.
Aluminium Transom Mounts and our reinforced nylon mounts have 2 pintle diameters and two or four hole fixing. The transom/pivot distance is 15mm (9/16") which can be increased by the use of packing pieces.
|
|
Three sizes for lines up to 10mm dia
This robust range of stainless steel blocks have a multitude of uses on all types of sailing boats.
Highly polished side plates with flared cheeks prevent the possibility of chafing the line whilst giving added strength.
A range of jamming blocks is also available and these give the ability to make up strong powerful compact and lightweight tackles.
These are ideal for use on dinghies and dayboats for kicking straps or wherever a compact and powerful rope tackle is required.
Now supplied with our new profile natural white sheaves and available in plain or ball bearing options.
|
|
|
Recirculating cars CNC'd from solid aluminium for performance and strength. Hard anodizing with Teflon® coating and Torlon® balls.
|
|
Fit a winchfeeder aft of a clutch to divert lines to an alternative winch
Useful for leading a line from a clutch on one side to a winch on the opposite side; the transfer is done quickly and efficiently using a winchfeeder sheave
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
