|
|
Our trailers for sailing boats and keeled yachts are equipped with a keel support fixed on the frame which can be adjusted to ensure a good stability on the road, with 4 to 6 vertical support ended by rubber boards and also with an adjustable V-shape snubber on the front.
The lighting board is divided into 2 parts easily removable connected to a plug on the mudguard, avoiding connecting system to be in contact with salt water. "Keel adaptation for a draft of 0.80 m or more".
Trailers for catamarans are equipped on the sides with width- adjustable supports and a post support. The models T1V and T4V are used for sailing dinghys.
|
|
Trailers Aluminium 2 in 1
Light - for the small dinghies
a concept innovating guaranteed 3 years
boat lanching authorised
tubular aluminium structure H.R.
anti-corrosive protection by anodization
Large wheels of series 145/70 R 13
Autograissés tight bearings...
|
|
Trailers especially designed for the transport of the sailing dinghies.
The cradles consist of a steel blade covered with a broad profile rubber which marries the shape of the hull perfectly (except D 135).
Hot galvanized frame.
Suspension with rubber elements.
Plate dismountable indication.
Polyethylene mudguard.
|
|
|
launching trolleys (not allowed to drive on the road) with a central axle of V-rollers for the range of CM, beach trolley for the range of "CO, CV", and low-loading trolleys equipped with 4 wheels and 4 hump blocks for the BD used for the storage of the boats.
|
|
OPTIMIST aluminium trolley
Aluminium Optimist trolley: Lighter than ref 3200, and easy to fit, seconds to remove, and take in your car chest. Better for top sailors
|
|
DINGHY galvanized trolley
galvanised steel trolley for all dinghies 3,50 m boat lenght 4,75 m (Equipe, Laser, 420, 470...) Very strong, with stainless steel wheel axles et screws
|
|
Launching trolley DER1
Dinghies Europe - Laser - Equipe - 420 ...
Chassis anodic aluminium
Bunk of protection stem
2 low pressure wheels
Adjustable and dismountable drawbar in 2 parts
Towing hitch & jockey big wheel (option)
Strap yellow adjustable
Support in « V » adjustable on drawbar
Overall length : 3m30
Length bearing hull : 2m90
Total width : 1m70
Width bearing hull : 1m50
Dismounted length : 1m50
Weight : 12kg
Launching trolley DER1L
Dinghies Europe - Laser - Equipe - 420 ...
Chassis anodic aluminium
Bunk of protection stem
2 low pressure big wheels
Adjustable and dismountable drawbar in 2 parts
Towing hitch & jockey big wheel (option)
Strap yellow adjustable
Support in « V » adjustable on drawbar
Overall length : 3m30
Length bearing hull : 2m90
Total width : 1m80
Width bearing hull : 1m50
Dismounted length : 1m50
Weight : 16kg
|
|
Launching trolley OPT1
Dinghies Optimist - Tender...
Chassis anodic aluminium
Bunks of yellow protection (good visibility)
2 low pressure wheels
Dismountable drawbar
Overall length : 1m95
Length bearing hull : 1m53
Total width : 1m55
Width bearing hull : 1m20
Dismounted length : 1m40
Weight : 8kg
Launching trolley OPT1L
Dinghies Optimist - Tender...
Chassis anodic aluminium
Bunks of yellow protection (good visibility)
2 low pressure big wheels
Dismountable drawbar
Overall length : 1m98
Length bearing hull : 1m53
Total width : 1m55
Width bearing hull : 1m20
Dismounted length : 1m40
Weight : 11kg
|
|
| ... products without information |
| |
Our platform-lift program starts from current 500kg up to 2.500 kg S.W.L., and we are designing customized configurations, including attachable variations for various platform applications upon customer's request.
Our products are generally made of SST 316L and 316TI in order to withstand the aggressive conditions of sea water for lifetime.
We are proud to say that many well known Boat- and Yacht Manufacturers appreciate the high quality, strength and durability of our products since almost 15 years now. (Please see also the list of installations)
Delivery content includes all required installation hardware, hydr.- and electr. components, as well as cockpit panel and remote controls and strong safety hooks - autom.-hydr. operating-.
|
|
Our platform-lift program starts from current 500kg up to 2.500 kg S.W.L., and we are designing customized configurations, including attachable variations for various platform applications upon customer's request.
Our products are generally made of SST 316L and 316TI in order to withstand the aggressive conditions of sea water for lifetime.
We are proud to say that many well known Boat- and Yacht Manufacturers appreciate the high quality, strength and durability of our products since almost 15 years now. (Please see also the list of installations)
Delivery content includes all required installation hardware, hydr.- and electr. components, as well as cockpit panel and remote controls and strong safety hooks - autom.-hydr. operating-.
|
|
Our platform-lift program starts from current 500kg up to 2.500 kg S.W.L., and we are designing customized configurations, including attachable variations for various platform applications upon customer's request.
Our products are generally made of SST 316L and 316TI in order to withstand the aggressive conditions of sea water for lifetime.
We are proud to say that many well known Boat- and Yacht Manufacturers appreciate the high quality, strength and durability of our products since almost 15 years now. (Please see also the list of installations)
Delivery content includes all required installation hardware, hydr.- and electr. components, as well as cockpit panel and remote controls and strong safety hooks - autom.-hydr. operating-.
|
|
Our platform-lift program starts from current 500kg up to 2.500 kg S.W.L., and we are designing customized configurations, including attachable variations for various platform applications upon customer's request.
Our products are generally made of SST 316L and 316TI in order to withstand the aggressive conditions of sea water for lifetime.
We are proud to say that many well known Boat- and Yacht Manufacturers appreciate the high quality, strength and durability of our products since almost 15 years now. (Please see also the list of installations)
Delivery content includes all required installation hardware, hydr.- and electr. components, as well as cockpit panel and remote controls and strong safety hooks - autom.-hydr. operating-.
|
|
Our platform-lift program starts from current 500kg up to 2.500 kg S.W.L., and we are designing customized configurations, including attachable variations for various platform applications upon customer's request.
Our products are generally made of SST 316L and 316TI in order to withstand the aggressive conditions of sea water for lifetime.
We are proud to say that many well known Boat- and Yacht Manufacturers appreciate the high quality, strength and durability of our products since almost 15 years now. (Please see also the list of installations)
Delivery content includes all required installation hardware, hydr.- and electr. components, as well as cockpit panel and remote controls and strong safety hooks - autom.-hydr. operating-.
|
|
tender serie 3300
Hydraulically powered stern platform lifting mechanisms facilitating the launching and hauling of dinghies, tenders and acquascooters. Constructed in AISI 36 L stainless steel with either two, three or more arms the mobile platforms have a working load ranging between 500 and 1.000 kg and are supplied complete with a torsion bar and a hydraulic piston safety device with adjustable plates.
|
|
Just enjoy
This Marinelift system offers you the the full boat delight – now also for yachts with Z-drive – either in water or on board:
- great diving depth thanks to design
- suitable for salvaging a tender
- revaluing design
- easy retrofit
Clean-cut the Marinelift Standard secures perfectly to your boat. In the cruising position the platform lengthens the boat. Thanks to the use of seawater resistant aluminium and GRP platform, the Marinelift is very light. The original ladder can be used via a panel retro fit kit.
When tilting, the platform moves in a curve to the the diving position. The platform is secured against undesired use in each position. When moving towards the boat the Marinelift switches automatically into the safety mode, and thus guarantees a safe bathing fun.
|
|
Troublefree parking
Coming back from the trip with your tender - how do both of you board? It can be as easy as this: With the radio remote control you extend the Marinelift platform and lower it into the water. You drive with your tender on the platform of the anchored yacht. The rails gives you guidance.
With the radio remote control you lift the platform together with the tender out of the water to the deck level. Then you drive with the platform horizontally towards the yacht. In order to protect other people in this area, the Marinelift switches to the safety mode before docking.
Whether alone after the ride with your tender or together with friends before the party on board – there is no more comfortable boarding with your tender. Once the platform is docked, all passengers can leave the tender dry. If your yacht has a boat garage, the garage door can be opened and closed via the Marinelift’s radio remote control.
|
|
Properly celebrating
On small and medium-sized yachts space might be a kind of luxury. With the Marinelift SliderParty you may allow yourself this luxury more often: In party position the boat will be lengthened by the platform. With the rail you may use it up to the platform edge – for celebration or sunbathing is your decision.
In the cruising position the platform lengthens your yacht just slightly. Due to the use of seawater resistant aluminium and the GRP platform the Marinelift is very light. If necessary, the weight of the Marinelift and the tender can be compensated by additional floating bodies. Your joy in cruising remains unchanged.
The secret of the Marinelift SliderParty is its sophisticated motion: While cruising the platform is retracted up to the stern. To use the platform it is at first slided out, and then lifted in the party position or lowered into the diving position.
|
|
Smooth diving
Up to now you descended by the use of a swimming ladder - today you plunge in with the Marinelift StandardPlus. Thanks to the great diving depth of the platform, passengers can easily enter and leave the platform – if necessary a rail offers you additional security.
In the cruising position the platform prolongs your yacht. You are gaining additional space for your leisure activities on deck if you do not want to dive. Sockets for a tender or even the use of a sunshade are possible. You decide what’s the most fun to you.
In the diving position the Marinelift StandardPlus dives deeper than the Standard version. This is possible due to the horizontal displacement of the platform during the diving process. When approaching the platform of the yacht, the automatic safety mode secures your bathing fun.
|
|
|
The “Nautical-Lift” is a unique lift apparatus, manufactured from 316-L grade stainless steel, and designed to transport a vessel’s swim platform in and out of the water. The lift structure ‘Hides’ below the swim platform, out of direct view while the swim platform is raised. Its stainless steel structure and hydraulic components, naval bronze bushings and anodic protection ensure that it will offer years of sea duty living at the waterline of the vessel.
|
|
- manually or hydraulically swivelling dinghy restorage
- mounting on the bathing platform or on the flat of the stern
- high polished or coated
- PVC insertion is adjusted to the hull of the dinghy
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
