|
|
Our trailers for sailing boats and keeled yachts are equipped with a keel support fixed on the frame which can be adjusted to ensure a good stability on the road, with 4 to 6 vertical support ended by rubber boards and also with an adjustable V-shape snubber on the front.
The lighting board is divided into 2 parts easily removable connected to a plug on the mudguard, avoiding connecting system to be in contact with salt water. "Keel adaptation for a draft of 0.80 m or more".
Trailers for catamarans are equipped on the sides with width- adjustable supports and a post support. The models T1V and T4V are used for sailing dinghys.
|
|
Trailers Aluminium 2 in 1
Light - for the small catamarans
a concept innovating guaranteed 3 years
boat lanching authorised
tubular aluminium structure H.R.
anti-corrosive protection by anodization
Large wheels of series 145/70 R 13
Autograissés tight bearings...
|
|
|
Hot galvanised chassis. Adjustable galvanised axle except on D 155. Suspension with rubber components. The cross members are telescopic, except on D 155 where the bunksare adjustable. Mast-holder. Removable taillight. Polyethylene mudguard. Leading rollers on the rear cross member (on D 175 - 305 - 355). NB: The empty weight may increase according to the equipment options (which reduces the payload).
|
|
Launching trolley CATA2
Catamarans from 15 to 20 feet
Chassis anodic aluminium
4 bunks of yellow protection (good visibility)
2 low pressure big wheels
Adjustable drawbar (2 axes) and dismountable in 2 parts
Overall length: 3m30
Width bearing adjustable hull: 2m17 with 3m00
Dismounted length: 1m50
Weight: 23kg
Launching trolley CATA2L
Catamarans from 15 to 20 feet
Chassis anodic aluminium
4 bunks of yellow protection (good visibility)
2 low pressure big wheels
Adjustable drawbar (2 axes) and dismountable in 2 parts
Overall length: 3m30
Width bearing adjustable hull: 2m17 with 3m00
Dismounted length: 1m50
Weight: 26kg
|
|
| ... products without information |
| |
| ... products without information |
| |
CATAROB T-01 is a teleoperated catamaran, through a radio modem, with compact size : length 1.7 m (5.6 ft) x width 1.0 m (3.3 ft) for a weight of 25 kg (55 lbs) w/o payload.
It is specially designed to carry out hydrographic missions in lakes, dams, rivers and harbour areas.
Its modular concept allows the easy integration of various sensors and tools, such as video cameras, imaging and side scan sonars, echo sounders, ADCP, etc.
It can be dismantled in seconds and transported in a medium size car.
|
|
All our sails are adaptable to the designated classes. They are designed and built in our sail loft. They are not original parts, except Laser original sails.
Leisure scholl range: Dacron extra-strenghened, eyelet oversized, white pannels, coloured pannels on request.
Training range: delivered with long bags for rolled sails and class logo.
|
|
|
Our one-design sails are world famous for their winning speed. Why are Ullman Sails the fastest in so many one-design classes? Our sailmakers are top-level competitors. Our sail-development and speed-testing programs are second to none. And our precision sail-cutting, fabric specifications, and quality control insure that each sail is world-class fast.
|
|
FATHEAD MAIN SAIL For Hobie Cat 16
Key points:
- Increase perf: State of the art Fat head sail cut with stable and thin profile.
- Better Power control: Depending on cunigham tension, the top head of the sail twists during the gust and powers back during down wind..
- Nice look and new sensations: these sails give a boost and new look to the boat.
|
|
Jib for hobie cat 16
Key points:
- Nice finish with red strips and full zip on luff.
- Perfect to boost your cat and ease your tackings.
|
|
|
For those who demand the very best sail shape possible in a genoa designed for furling. Design focus is on durability, performance, extended range, versatility, and control in breeze. Composite materials are used in the same tri radial construction (not a simplified version) usually found only in the most sophisticated racing genoas. Initial performance is comparable to that of pure racing genoas, combined with a dramatically improved long term shape-life and partial furling capability by comparison to cross cut configurations. Structural durability is absolutely not compromised.
|
|
Asymetrical spinnaker for F18 and Hobie cat 18 multihulls.
Designed for Leisure sailing
Nice cut and design with Patch for firling.
Deliver in bag
|
|
NEW GENERATION JIB For F18 Multihulls
Key points:
- Increase perf: Innovative leesh cut inspired by America's cup genoa. More surface on the high part of the Jib
- Full batten with triradial cut
- Cut in respect of F18 class
Price: 300€
|
|
Jib for 14' cats
Key points:
- Nice finish with full zip on luff
- Perfect to boost your cat and ease your tackings.
|
|
FATHEAD MAIN SAIL For DART 18 Multihulls
A revolution for this catamaran of former generation!! Unique concept which gives back a boost and the pleasure of sailing!!
Key points:
- Increase perf: State of the art Fat head sail cut with stable and thin profile thanks to laminate cloth and composite tube battens.
- Better Power control: Depending on cunigham tension, the top head of the sail twists during the gust and powers back during down wind..
- Nice look and new sensations: these sails give a boost and new look to the boat and allow a 360° clean look on water.
|
|
FATHEAD MAIN SAIL For Hobie Cat 14
Key points:
- Better Power control: Depending on cunigham tension, the top head of the sail twists during the gust and powers back during down wind.
- Nice look and new sensations: these sails give a boost and new look to the boat.
|
|
FATHEAD MAIN SAIL For F18 Multihulls
Key points:
- Increase perf: State of the art Fat head sail cut with stable and thin profile thanks to Laminate cloth and composite tube battens.
- Better Power control: Depending on cunigham tension, the top head of the sail twists during the gust and powers back during down wind.
- Nice look and new sensations: these sails give a boost and new look to the boat and allow a 360° clean look on water.
|
|
FATHEAD MAIN SAIL For 17' Multihulls
Key points:
- Increase perf: State of the art Fat head sail cut with stable and thin profile thanks to Laminate cloth and composite tube battens.
- Better Power control: Depending on cunigham tension, the top head of the sail twists during the gust and powers back during down wind..
- Nice look and new sensations: these sails give a boost and new look to the boat and allow a 360° clean look on water.
|
|
FATHEAD MAIN SAIL For multihull 18 feets like Hobbie cat 18
Key points:
- Increase perf: State of the art Fat head sail cut with stable and thin profile thanks to Laminate cloth and composite tube battens.
- Better Power control: Depending on cunigham tension, the top head of the sail twists during the gust and powers back during down wind..
- Nice look and new sensations: these sails give a boost and new look to the boat and allow a 360° clean look on water.
|
|
Forward Sailing brings to 18 feet multihulls what the race cats and tris are using since years with success
Key points:
- Double your speed by low wind: go upwind and create your wind machine!
- Easy: Super easy to roll and unroll, no more need for trampoline bags!
- Polyvalent: Can be used by low wind up wind or downwind instead of spinnaker.
Price: 600€ with sail bag
Surface:23m2
|
|
GENAKER/REACHER 22m2 For 18 feet multihulls
Forward Sailing brings to 18 feet multihulls what the race cats and tris are using since years with success
Key points:
- Double your speed by low wind: go upwind and create your wind machine!
- Easy: Super easy to roll and unroll, no more need for trampoline bags!
- Polyvalent: Can be used by low wind up wind or downwind instead of spinnaker.
|
|
|
|
|
|
|
Our productrange varies from sails for 12 foot boats untill 45 foot yachts. We do not only produce the windwings where everybody is sailing with but we also carry a complementary line of other products such as : genaker retrieving systems, spinaker poles ( carbon), sailbattens, etc.
All sort of repairs are possible, yachtsails with an total area of 350 m2 are no problem for our line of machinery that we have. Our needles sizes go up to 200 in thichness and we can handle almost any thickness of reinforcements in sails. Please, let us make a quote for the set of sails for your yacht and you will surprised what have to offer you in terms of quality, performance and service!
We also build custom made products such as specialized covers and high-tech innovative products for Universities. Ask us what we can do for you and we might be able to give you the solution to your answers. Our 450 m2 sailloft has been used for all sorts of projects the last couple of years where Performance Sails had here hands on.
|
|
|
|
see the results for the following category : 
