|
|
OPTIMIST aluminium trolley
Aluminium Optimist trolley: Lighter than ref 3200, and easy to fit, seconds to remove, and take in your car chest. Better for top sailors
|
|
Carriage of setting to water aluminum for Center-boards
Leger-Dismountable-Adjustable-towable DER3L
|
|
Carriage of setting to water aluminum for Center-boards
Leger-Dismountable-Adjustable-towable DER1 & DER1L
|
|
Carriage of setting to water aluminum for Optimist
Leger-Dismountable-adjustable OPT1 & OPT1L
|
|
Carriage of setting to water aluminum for Catamaran
Leger-Dismountable-adjustable CATA2 & CATA2L
Frame Anodic Aluminum
6 shoes of yellow protection (good visibility)
4 low wheels pressure dismountable
Crutch of anchoring
Nuts and bolts stainless
Overall length: 3m30
Width bearing adjustable hull: 2m17 with 3m00
Weight: 24kg
|
|
Overall lenght 16,84 m
Hull lenght 16,04 m
Waterline lenght 15,14 m
Beam 4,80 m
Displacement 12,5 T
Ballast weight 3 T
Draft 1,20 m / 3 m
Mainsail 68 m²
Solent (100%) 62 m²
Sail area 130 m²
Power 62 ch
Water tanks 2 x 240 l
Fuel tank 2 x 260 l
|
|
Overall lenght 17,80 m
Hull lenght 16,95 m
Waterline lenght 15,75 m
Beam 5,25 m
Light displacement 21 T
Loaded displacement 26 T
Draft 1,30 m / 3,50 m
Lead ballast 7 T
Genoa 80 m²
Mainsail 80 m²
Spinnaker 195 m²
Water tanks 1200 l
Fuel tanks 900 l
|
|
Ces bateaux, connus sous le concept ULDB aluminium (Ultra Light Displacement Boat), sont des bateaux rapides et sûrs destinés à la grande croisière et au grand voyage.
Très faciles à manier, un équipage réduit en tire facilement la quintessence dans le plus grand confort.
Le ballast sur chaque modèle permet au bateau de garder une faible gîte garantissant, ainsi performance et confort.
Dotés d’une coque en forme élégante et racée, les Cigales dessinés par Jean Marie Finot se distinguent aussi par un plan d’aménagement original et très confortable, avec un très vaste carré sous le cockpit.
|
|
Overall lenght 13,80 m
Hull lenght 12,80 m
Waterline lenght 12,15 m
Beam 4,10 m
Displacement 8,5 T
Ballast weight 2 T
Draft 1,50 m / 3 m
Mainsail 62 m²
Solent (100%) 41 m²
Sail area 103 m²
Power 50 ch
Water tanks 2 x 200 l
Fuel tank 2 x 220 l
|
|
Overall lenght 19,20 m
Hull lenght 18,24 m
Waterline lenght 16,75 m
Beam 5,50 m
Light displacement 25 T
Loaded displacement 30 T
Draft 1,35 m / 3,80 m
Lead ballast 9 T
Genoa 90 m²
Mainsail 90 m²
Spinnaker 220 m²
Water tanks 1200 l
Fuel tanks 1400 l
|
|
Carriage of workshop aluminum for Jet with Arm & Jet with Saddle
Leger-Handy-robust AJB & AJS
|
|
Carriage of setting to water Towable aluminum for Jet with Saddle
Leger-Dismountable-Adjustable-towable JET4L
carriage of setting to water JET4L
Frame Anodic Aluminum
Wheel axle stainless
7 shoes of yellow protection (good visibility)
2 low wheels pressure dismountable
Dismountable tiller of traction
1 head of attachment
1 winch with strap
Nuts and bolts stainless
Overall length: 2m75
Length of the slopes: 1m20
Total width: 1m10 Distance between centres of the slopes: 0m51
Total height: 0m49
Weight: 35kg
Payload 450kg
|
|
Carriage of setting to water aluminum for Jet with Arm
Leger-Dismountable-adjustable JET1 & JET1L
|
|
Carriage of setting to water Towable aluminum for Jet with Arm
Leger-Dismountable-Adjustable-towable JET3L
|
|
You are looking at a chemical washed plate aluminium boat with a Nyalic clear coat finish. These boats are beautifully finished and proudly an Aluminium boat. No Bog or paint used to produce a fair hull.
Available factory direct in New Zealand
The AMF 660 Hardtop Cabin is built tough for the demanding coastal waters off New Zealand, A fine entry gives this boat a soft ride, while moderate dead rise at the transom along with a wide beam gives this boat fantastic stability.
AMF Boats are known for thier tought uncomprimising build and performance.
The AMF 660 Hardtop Cabin has a two metre long bunks, a wheel house (hardtop) with 6mm toughened glass windows. The Wheel house on this model is Enclosed with a back wall and full length glass sliding door. 220 litre underfloor fuel tank, 6mm 5083 Hull Plates, 5mm 5083 Transom, 5mm Treadplate Deck(floor) 4mm 5083 Side Plates.
AMF carry a 10 Year Recreational Structural Hull Warranty for the this Pro Sport Series Model.
For further details please contact us.
|
|
You are looking at a chemical washed plate aluminium boat with a Nyalic clear coat finish. These boats are beautifully finished and proudly an Aluminium boat. No Bog or paint used to produce a fair hull.
Available factory direct in New Zealand
The AMF 660 Hardtop Cabin is built tough for the demanding coastal waters off New Zealand, A fine entry gives this boat a soft ride, while moderate dead rise at the transom along with a wide beam gives this boat fantastic stability.
AMF Boats are known for thier tought uncomprimising build and performance.
The AMF 660 Hardtop Cabin has a two metre long bunks, a wheel house (hardtop) with 6mm toughened glass windows. 220 litre underfloor fuel tank, 6mm 5083 Hull Plates, 5mm 5083 Transom, 5mm Treadplate Deck(floor) 4mm 5083 Side Plates.
AMF carry a 10 Year Recreational Structural Hull Warranty for the this Pro Sport Series Model.
For further details please contact us.
|
|
You are looking at a chemical washed plate aluminium boat with a Nyalic clear coat finish.These boats are beautifully finished and proudly an Aluminium boat. No Bog or paint used to produce a fair hull.
The flagship of the AMF Pro Sport Series is the 770 Hardtop Cabin. The 770 boasts a large Vee Berth Cabin area, generous shelter under the wheelhouse and excellent deck space.
The AMF 770 Hardtop Cabin is built tough for the demanding coastal waters off New Zealand, A fine entry gives this boat a soft ride, while moderate dead rise at the transom along with a wide beam gives this boat fantastic stability.
AMF Boats are known for their tought uncomprimising build and performance.
Only the best grade of materials are used in the manufacture of AMF Boats.
The AMF 770 Hardtop Cabin has long bunks, a wheel house (hardtop) with 6mm toughened glass windows. 220 litre underfloor fuel tank, 6mm 5083 Hull Plates, 5mm 5083 Transom, 5mm Treadplate Deck(floor) 4mm 5083 Side Plates.
The wheelhouse has the option of being built in with a back wall and full length glass sliding door.
AMF carry a 10 Year Recreational Structural Hull Warranty for the this Pro Sport Series Model.
Available Factory direct in New Zealand.
For further details please contact us.
|
|
| ... products without information |
| |
For the fans who take the leisures with the serious one! These tires Honda Hon-Wave with floor aluminum are at ease under all the nautical activities and conditions of navigation. Their oversize floats guarantee a comfortable and sure navigation in all circumstances. You can benefit everywhere from their tested rpbustess, so much their transport and their assembly is simple. Envisaged especially for the outboard motors BF15, BF20, BF25.
|
|
|
The "traditional ones" (series SD) have all the assets of the ideal dinghy: robust, compact and equipped with a modern look. In family or between friends, they are adapted as much to the walk. Available in floor plywood, aluminum or inflatable, it take along for their greater pleasure from 2 to 7 passengers.
|
|
|
For the fans who take the leisures with the serious one! These tires Honda Hon-Wave with floor aluminum are at ease under all the nautical activities and conditions of navigation. Their oversize floats guarantee a comfortable and sure navigation in all circumstances. You can benefit everywhere from their tested rpbustess, so much their transport and their assembly is simple. Envisaged especially for the outboard motors BF15, BF20, BF25.
|
|
|
A direct descendant of the glorious Classic line whose hull shape it adopts, the DVC range blends the characteristics of reliability, easiness to handle and clean sailing with the stability guaranteed by its tubular structures, with their large diameter and made from a thick PVC cloth. With the steering console, its many lockers and the sundeck at the bow, the PA 580 DVC has large internal spaces, suitable for accommodating up to 12 passengers. Coming in a completed outfitted and a package formula with Selva Marine motors, it is a boat with an important size, with a really interesting price.
|
|
PVC inflatable boat with aluminium deck complitely gluted at cold without any welded part.
DP200 2.00x1.27 mts. - 2.0 persons - 2.5/1.9 hp/kw max power
DP240 2.30x1.27 mts. - 3.0 persons - 4.0/3.0 hp/kw max power
DP270 2.68x1.51 mts. - 3.0 persons - 10/7.5 hp/kw max power
DP300 2.98x1.51 mts. - 4.0 persons - 10/7.5 hp/kw max power
DP330 3.21x1.51 mts. - 4.5 persons - 15/11.2 hp/kw max power
DP350 3.57x1.70 mts. - 5.5 persons - 20/15.0 hp/kw max power
DP380 3.77x1.70 mts. - 6.0 persons - 25/18.7 hp/kw max power
|
|
|
The "traditional ones" (series SD) have all the assets of the ideal dinghy: robust, compact and equipped with a modern look. In family or between friends, they are adapted as much to the walk. Available in floor plywood, aluminum or inflatable, it take along for their greater pleasure from 2 to 7 passengers.
|
|
P340HA tendeer
Innovative design and reinforced cones. The
Trail models are equipped with an inflatable V-type hull providing a stable and comfortable ride, and making it ideal to use under power.
For an easy ride to the harbour in all seasons and situations.
• Grey or Red
• Max number of persons : 5 + 1 child
• Maximum load : 750 kg
• Floor : Full, aluminium floor
• Grey wooden seat + seat-patch : supplied as standard
• Equipment included Fixing strap for fuel tank, valise, repair kit, bellows pump, 2 paddles
•Inflatable hull.
|
|
|