|
|
KARVER K-Blocks (see KARVER K-Block & KARVER K-Block High Load) are available for dinghies and small catamarans.
Lashing block's advantages remain the same: safety, light weight, attachment and reduced noise.
KARVER K-Blocks for sailing dinghy have high resistance plastic and glass fibers cheeks; aluminium sheave; and Torlon bearings.
KARVER K-Blocks for sailing dinghy are available for safe working load going from 0.05 to 1 T; and for rope diameters up to 10 mm.
|
|
TECHNICAL
Sheave Dia : 57mm
Material : Acetal Resin
Cheeks : Acetal Resin
Axle : Aluminium (Hard Anodised)
|
|
RWO'S range of anodised aluminium fittings offer excellent strength, great rigidity, exceptional choice and are lightweight. We also offer electro polished stainless steel fittings and a range of reinforced nylon transom mounts.
Aluminium Rudder Fittings come in three widths with a choice of length and pintle diameter plus optional packing pieces.
Aluminium Transom Mounts and our reinforced nylon mounts have 2 pintle diameters and two or four hole fixing. The transom/pivot distance is 15mm (9/16") which can be increased by the use of packing pieces.
|
|
Three sizes for lines up to 10mm dia
This robust range of stainless steel blocks have a multitude of uses on all types of sailing boats.
Highly polished side plates with flared cheeks prevent the possibility of chafing the line whilst giving added strength.
A range of jamming blocks is also available and these give the ability to make up strong powerful compact and lightweight tackles.
These are ideal for use on dinghies and dayboats for kicking straps or wherever a compact and powerful rope tackle is required.
Now supplied with our new profile natural white sheaves and available in plain or ball bearing options.
|
|
|
Recirculating cars CNC'd from solid aluminium for performance and strength. Hard anodizing with Teflon® coating and Torlon® balls.
|
|
Fit a winchfeeder aft of a clutch to divert lines to an alternative winch
Useful for leading a line from a clutch on one side to a winch on the opposite side; the transfer is done quickly and efficiently using a winchfeeder sheave
|
|
| ... products without information |
| |
These trailers are designed for fishermen and people who like to sail on lakes and rivers.
This range has a keel roller on the back and 2 very long carpeted bunks on which the boat is lying which is the best way to avoid the hull to be damaged. .
|
|
Trailers Aluminium 2 in 1
Light - for every boat shapes
a concept innovating guaranteed 3 years
boat lanching authorised
tubular aluminium structure H.R.
anti-corrosive protection by anodization
Large wheels of series 145/70 R 13
Autograissés tight bearings...
|
|
|
We sell our products to professionals only...if you are an individual, please don't send any requests. Thank you very much.
|
|
Launching trolley ANEX2
Dinghies - Tenders - Inflatable boats..
Chassis anodic aluminium
Bunks of protection stem
2 low pressure wheels
Dismountable drawbar in 2 parts
Towing hitch & jockey big wheel (option)
Support in "V" adjustable on drawbar
Directional Bunks
Overall length: 3m30
Length bearing hull : 2m90
Total width: 1m70
Width bearing hull: 1m50
Distance between centres bunks: 0m80
Dismounted length: 1m50
Weight: 13kg
Launching trolley ANEX2L
Dinghies - Tenders - Inflatable boats...
Chassis anodic aluminium
Bunks of protection stem
2 low pressure big wheels
Dismountable drawbar in 2 parts
Towing hitch & jockey big wheel (option)
Support in "V" adjustable on drawbar
Directional Bunks
Overall length: 3m30
Length bearing hull : 2m90
Total width: 1m80
Width bearing hull: 1m50
Distance between centres bunks: 0m80
Dismounted length: 1m50
Weight: 17kg
|
|
| ... products without information |
| |
|
Pre-stretched, very low stretch high-load adjust line, its special 8-plait cover out of highly resilient Polyester assures a good handling and excellent grip in cleats.
|
|
|
D-Pro provides cutting edge performance on modern performance dinghies and sport boats. Especially developed for transmission of highest loads to deliver maximum speed. An all purpose rope with the lowest weight and minimal stretch incorporating the LIROS HEAT-STRETCH-SYSTEM. High abrasion resistance and zero water absorption due to LIROS impregnation system.
|
|
|
A high performance Polyester cover with Dyneema core makes this an ideal rope for performance dinghies, catamarans and sports boats. The low stretch and good grip characteristics make this ideal for control lines and halyards.
|
|
The Marlow Pre-Stretched 12 Strand Dyneema construction of this high performance line. Strength for strength it is lighter than steel. If you want to downsize and save weight in the Rig and on Deck then this lightweight line offers high strength with flexibility.
Designed for durability Excel D12 now has the new Armourcoat high penetration coating for even better wear resistance and protection. Its tolerance to abrasion is excellent and it is resistant to degradation from UV light. With a specific gravity of 0.98 this line will float, has zero water uptake and can be spliced very quickly.
Special features:
Lightweight and flexible
Pre-Stretched and heat set
High strength to weight ratio
No water absorption, will float
Quick and easy to splice, even when afloat
Marlow Armourcoat with UV and abrasion protection
Excellent for Strops, Lashings and Trapeze Lines
Excellent alternative to wire
|
|
Dinghy sailors turn to 6mm or 8mm Excel Pro when they want hardwearing Main, Jib or Spinnaker Sheets. Smaller sizes of 4mm and 5mm are ideal as reliable Control Lines with a responsive feel.
Special features:
Low stretch Polyester core
Tough smooth profile holds fast
Durable cover protects against wear
Flexibility allows lines to run smoothly
Distinctive colors
|
|
| ... products without information |
| |
|
|