|
|
Our trailers for sailing boats and keeled yachts are equipped with a keel support fixed on the frame which can be adjusted to ensure a good stability on the road, with 4 to 6 vertical support ended by rubber boards and also with an adjustable V-shape snubber on the front.
The lighting board is divided into 2 parts easily removable connected to a plug on the mudguard, avoiding connecting system to be in contact with salt water. "Keel adaptation for a draft of 0.80 m or more".
|
|
|
|
|
|
|
Con-o-lift marine hydraulic highway trailers offer superior flexibility and handling efficiency for today's commercial boat haulers and marine operations. Our hydraulic trailers are very versatile, allowing the same unit to safely handle a wide range of vessel types and sizes with minimal adjustment.
These highway trailers are constructed with a clean, open-frame design , which allows boats to be carried (and set) lower to the ground than any other trailer design. Our hydraulic expanding-width frame system (standard on all trailer models YH-5XD and larger) allows even greater flexibility.
With our trailer, the hull is supported on large adjustable pads set into the side-frames of the trailer, allowing power boats to be carried without the use of awkward slug beams or cross bars to support the keel. These rugged steel side frames are equipped with Con-o-lift's exclusive extended frame lift system for independent hydraulic height adjustment. This system provides unparalleled lift range and flexibility, and allows vessels to be carried at a near-level position on the launch ramp.
|
|
|
|
|
|
|
Con-o-lift's rugged OTR trailers deliver superior performance for the discerning long-distance carrier. These premium quality trailers are specifically designed to meet the demands of the commercial, over-the-road boat-hauler, providing superior quality, performance, and corrosion resistance.
All OTR trailers are supplied with complete hot-dip galvanizing protection for maximum service life. A complete stainless steel hardware package is provided, including pivot pins, fasteners, and hydraulic shafts and fittings.
These trailers feature 22,500 lb Dexter axles, complete with Firestone air-ride suspension, and 235/75R17.5 radial tires mounted on hot dip galvanized rims. The rugged steel frame is engineered to bear the vessel weight on 6" x 6" hardwood keel beams, while electronic overrides in the air suspension system provide a frame lift range of 13" - 21" over the crossbeams.
The hull is stabilized with six fully adjustable hydraulic arms. The arms also extend (manual extension) to accommodate deep-keel sailing vessels. In addition, these trailers are designed with rotating rear arms to provide greater flexibility.
Con-o-lift OTR trailers are also equipped with hydraulic front landing gear, designed to facilitate independent operation on the launch ramp (by means of a truck-mounted winch). The trailer includes a self-contained power unit and air-supply to allow the hydraulic functions and air brakes to operate without attachment to the tow vehicle.
These trailers come standard-equipped with wireless remote control for added convenience and safety. A manual back-up control panel for all functions is also provided in a gooseneck-mounted lockable storage cabinet.
Con-o-lift OTR trailers offer a rugged, proven solution for today's commercial hauler.
|
|
|
These trailers of the type MTV (coastal cruiser) were especially studied for the transport of sailboats. Hot galvanized frame. Axle (X) adjustable (S) to perfect the balance of the loading. Suspension with rubber elements. They are equipped with a system of braking to inertia with automatic passing except on MTV 575. They are equipped with 4 telescopic candles, a front candle to receive the stem of the boat and a goutière support ballast with adjustable thrust. Plate telescopic and removable indication. Jockey wheel. Steel or polyethylene mudguard with tubular side protection starting from MTV 725 F.
|
|
| ... products without information |
| |
New Nacra F18 Infusion Cover
Very nice fitting, especially at the front where we design a good fitting of the inverted hulls:
- Protection: Good protection of deck fitting from UV and thieves.
- Saving: Longer keep in good shape the trampoline which is expansive to change...
|
|
New Nacra F18 Infusion Cover
Very nice fitting, especially at the front where we design a good fitting of the inverted hulls:
- Protection: Good protection of deck fitting from UV and thieves.
- Saving: Longer keep in good shape the trampoline which is expansive to change...
|
|
- 4 1/2" PowerDamp Plus, High-Visibility Blue Dial with Extra Large White Numerals
- Easily Installed, Fits 4.75" (12.07 cm) Mounting Hole. Click here to view a template of the mounting hole (NOTE: Be sure you print the template actual size).
- Built-in Compensators to Easily Adjust for Deviation
- Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement
- Internal Gimbal Systems for Maximum Stability During Adverse Pitch and Roll Conditions
- Powerful DirectiveForce Magnets for Fast Heading Lock-on
|
|
- 2 3/4" Direct-Reading Dial
- Easily Adjustable Bracket Mount with Thumb-screws
- No-Glare Gray Finish with High-Visibility Blue Dial
- Distinctive RitchieAngler Graphics
- Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement
- Internal Green Night Lighting
- Built-in Compensators to Easily Adjust for Deviation
- Movable Sun Shield
- DirectiveForce Magnets
- 100% Repairable
- Exclusive 5-Year Ritchie Warranty
|
|
- Choice of 2 or 5 Degree Markings
- Large 6" Dial Diameter
- Easily Installed, Fits 7 1/4" (18.42 cm) Mounting Hole. Click here to view a template of the mounting hole (NOTE: Be sure you print the template full size).
- PowerDamp Performance Dials
- 90 degree Lubber Lines for Easy Reading
- Full Internal Gimbals
- 12 Volt Green NiteVu Lighting
- Optional Night Lighting Available in 24 or 32 Volts
- Spherical Design with Fiberglass Reinforced Bowl
- High-Capacity Roller Diaphragm for Extended Temperature Operating Ranges
- 100% Repairable
- Exclusive 5-Year Ritchie Warranty
|
|
- 2 3/4" Easy to Read Direct Reading Dial
- Viewing is adjustable to 30 degrees
- Adjustable and Removable with Bracket and Thumbscrews
- Internal Green Night Illumination
( Built-in Compensators to Easily Adjust for Deviation
( Easily Installed, Fits 3" (7.62 cm) Mounting Hole. Click here to view a template of the mounting hole (NOTE: Be sure you print the template actual size).
|
|
- 2 3/4" Easy to Read Direct Reading Dial
- Viewing is adjustable to 30 degrees
- Adjustable and Removable with Bracket and Thumbscrews
- Internal Green Night Illumination
- Built-in Compensators to Easily Adjust for Deviation
|
|
- 3 3/4" PowerDamp Dial
- Special Reinforced Bracket with Quadrantal Correctors
- Hardened Steel Pivot and Sapphire Jewel Movement
- 45 Degree Lubber Lines
- Full Internal Gimbals
- Exclusive Built-in Green NiteVu Lighting
- Built-in Standard Compensators and Booster Magnets on Base
- Movable Sun Shield
- 100% Repairable
- Exclusive 5-Year Ritchie Warranty
|
|
- Easy to Read 2" Direct-Reading Dial
- Hardened Steel Pivot and Sapphire Jewel Movement
- Built-in Roller Diaphragm for Extended Temperature Operating Range
- International Safety Yellow Case
- Silicon Impact Resistant Case with Neck Lanyard
- Compact Size for Easy Handling and Storage
- QuickSight V-Notch and Lubber Line for Easy Heading Alignment
- Non-Electric Chem Sticks Provide 18 Hours of Night Lighting
- New Holder Ideal for Deck Mounting SportAbout Compasses on Small Boats
- Holder Available in Black or White
|
|
| ... products without information |
| |
| ... products without information |
| |
Mimic panel X for navigation lights and bilge pump control for motor yacht.
|
|
| ... products without information |
| |
The Smartswitch NavLight monitor (NV-8000)will monitor and control all the Navlights and alarm when there is a fsulty or blown light. Navlights can be put into 6 programmable groups, twilight sensor option, all lights are name programmable,
Also available is the (NV-2000) will monitor up to 32 lights.
|
|
Scanpod - Deck Pod
Our exciting new range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot controls onto yachts and powerboats.
- Simplified range – easy product selection
- Choice of two high gloss colours – new silver or traditional white
- Manufactured from acrylic capped ABS plastic – tough, durable and UV stable
- Tamper proof stainless fastenings – secure install without self-tapping into plastic
- Innovative watertight seal system – full instrument protection
- Supplied uncut to fit any display
Deck Pods
A range of universal pods to install displays onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.
- Swivel / tilt base – provides level mount on any angled slopes and locks / unlocks into position
- Models to fit 8”, 10” and 12” displays
|
|
|
|
