|
|
Atlantic Marine system features non-corrosive materials specifically selected for their suitability in marine environment and subject to strict quality control at every stage of construction.
Aluminium chassis:
Chassis are made of aluminium marine alloy 6005 and designed as truss-frame. Longitudinal beams are custom-built extruded section (5 to 14 kg/m) while transversals and diagonals are Rectangular (R.H.S.) or Square Hollow Sections (S.H.S.). All members are assembled by MIG welding.
|
|
|
|
|
|
|
PUSH BUTTON MOORING LINE RELEASE
Imagine being able to release your boat's mooring lines at the press of a button. No more turning your guests into crew. It provides complete control at the push of a button. The AutoCleat will release any line configuration - loop, figure 8 or slip knot.
CLEAR DECKS AND PASSAGEWAYS
Smart boat design means clever utilisation of every space and surface available. The AutoCleat provides a strong, secure mooring point while berthed and when not required, retracts flush at the push of a button leaving those valuable surfaces uncluttered. No more stubbed toes and no more snagged fishing lines or halyards.
DESIGNED AND BUILT TO LAST
Cast from a high strength, corrosion resistant stainless steel, the horns of the AutoCleat give exceptional high side-load carrying capacity. With the remaining components manufactured from marine grade materials and composites, the AutoCleat comes complete with a 3 year warranty against manufacturing defects.
THE ULTIMATE CLEAT
The AutoCleat is the only mooring cleat that allows you to release your mooring lines, regardless of how the line is secured to the cleat and also retracts flush into the deck. International patent pending.
SIMPLE AND STRONG INSTALLATION
The AutoCleat has been designed with the home handy-man in mind. In less than 20 minutes using some basic tools, the AutoCleat can be installed and fully operational. Only two low amperage wires are required to power up the AutoCleat. The AutoCleat gains strength from being fixed into the deck of the boat.
THE LITTLE EXTRAS
Due to the unique design of the crossing 'horns' the AutoCleat secures the mooring line above the deck not on the deck and thus reducing line wear on the boat. The AutoCleat comes standard with a Power Failure Over-ride (PFO) button located in the deck plate. The PFO allows the unit to be operated in the event of boat electrical power failure, always providing a secure mooring location. For more informatiion visit www.strongmarine.com
|
|
|
A very popular open utility cleat manufactured in marine quality bronze. Basically a spring cleat for power boats or stern cleats for sail boats. The centre serves as a fairlead when necessary. Available in polished bronze or marine quality chrome plated finish. Sizes include 5", 6", 8", 10", 12" and 14". 10" Stainless Steel Cleat ios also available.
|
|
|
Our mooring cleats are manufactured from cast manganese bronze and are available in a polished or marine quality chrome plated finish. Four hole mounting on twin oval bases. Available in 6", 8", 10", 12" and 14" sizes.
|
|
MOORING CLEATS (MH4)
The Walcon twin-posted cast aluminium mooring cleat can be fitted to all standard units with a simple through- bolt connection. The assembly has been load-tested to 3 tonnes in line and 1 tonne laterally. Cleats on System 2000 walkways are fitted into a groove on the side extrusion and may be simply moved by sliding.
|
|
Great new Flush Cleat design from the leader in stainless steel hardware! This cleat recesses flush to the deck for a clean, contemporary look at an affordable price. Corrosion-resistant 316 stainless steel construction (patented design). Water-resistant cleat recesses into cast body and is captured with lubricated seals. An optional drainage receptacle mounts below the cleat to drain off water.
Design Refinements
- Easy to operate- simply pull up the cleat from its body
- Standard four-hole mount
|
|
Stag Horn Cleat
Large Staghorn Cleat with heavy gauge tubular supports/solid bar top and base plate
|
|
Cooney Stainless Steel Cleats & Fairleads
A range of the highest quality cleats and fairleads manufactured in 316 stainless steel and polished to perfection. Available with backing plates and all necessary fastenings.
View cleats and fairleads from our Super Yacht Range
|
|
|
Horn Cleats In five sizes, suitable for halyard control lines or mooring cleats for the range of ropes. Generous base area allows the cleat to be secured firmly.
|
|
Cleats are used for setting mooring lines and making fast at a dock. Attwood cleats are available in a variety of styles that will accentuate the appearance of any vessel. Base your selection on these considerations:
Stainless Steel – Stainless-steel alloy cleats are guaranteed for life
ZAMAK – Corrosion-resistant Perma-Plate® chrome-plated finish
Other Material – Economical cleats that serve a variety of uses
|
|
OPEN CLEATS:
A wide range of open [Horn] cleats mouded from tough high strength black nylon.
|
|
|
cleat in Stainless steel AISI 316 from 320 milimeter
|
|
| ... products without information |
| |
|
|
