|
|
The Auto-Release cleat provides the neatest and best solution to the problem of how to lock-down a rudder blade yet allow it to flip-up if it hits the bottom or a solid obstacle in the water. The cleat holds ropes securely yet will release them immediately when the cleat is overloaded. Once tripped, it can be easily reset in seconds by just pushing the cleat back down into its base.
|
|
CL268 - Racing Micros
CL268AN - Racing Micros (Hard Anodised)
Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Applications include Canoes (seat & rudder lines);
Dinghy control lines; Kitesurfing (5th line adjustment).
Manufactured from aluminium for a light weight and durable performance the CL268 is available in two finishes:
1. CL268 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL268AN has a hard anodised finish to give a hard wearing surface.
|
|
CL270 - Racing Micros with Becket
CL270AN - Racing Micros with Becket (Hard Anodised)
The becket holds the end of the rope under the cleat. No need for an extra fixing. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope.
Manufactured from aluminium for a light weight and durable performance the CL270 is available in two finishes:
1. CL270 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL270AN has a hard anodised finish to give a hard wearing surface.
|
|
With the CL205 the rope drops down into the teeth to give a quick, positive lock that is easy to release.
The cleat is maufactured from UV resistant plastic making it cost effective and ideal for holding rope in an outdoor enviroment. Its simple design has led to it being fitted on boats to farm equipment.
|
|
Cam cleat
Seldén cam cleats c-c 27 and 38 mm are made of carbon fibre reinforced polyetherimide. This material is selected for its high resistance to friction heat. There is also an aluminium version of cam cleat 38 made of hard anodised aluminium.
Full assortment of accessories such as fair leads, line guides, bull's eyes, risers and wedges.
|
|
|
Composite and aluminum versions with new teeth configuration for ease of cleating. The composite material is very robust offering greater wear resistance. For higher load applications, the aluminum version offers even greater strength and durability.
|
|
CL230 - Racing Junior MK1 with Roller
CL230 AN - Racing Junior MK1 with Roller (Hard Anodised)
CL230 can be rigged for adjusting a trapeze
|
|
|
An elegant design in black or white nylon. The rope drops down into the teeth. Also available in Aluminium.
|
|
A neat, compact alloy cleat.
Manufactured from aluminium for a light weight and durable performance the CL211 Mk2 is available in two finishes:
1. CL211 Mk2 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL211 Mk2AN has a hard anodised finish to give a hard wearing surface.
|
|
With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release.
Manufactured from aluminium for light weight and durable performance.
It is available in a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and coastal conditions.
|
|
With the CL254 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Will hold very high loads when used with high quality ropes.
Manufactured from aluminium for light weight and durable performance the CL254 is available in two finishes:
1. CL254 has a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and coastal conditions.
2. CL254AN has a hard anodised finish to give the ultimate hard wearing surface. Excellent for extreme coastal conditions.
|
|
With the CL201 the rope drops down into the teeth to give a quick and positive lock that is easy to release.
The cleat is maufactured from UV resistant plastic, making it cost effective and ideal for holding rope in an outdoor enviroment. Its simple design has led to it being fitted on boats to farm equipment.
|
|
|
For 4-8mm (5/32 - 5/16") ropes. Marine grade nylon. Fix with No 10 (4.8mm) screws, or 3/16" (M5) bolts.
|
|
One of our most popular cleats.
CL203 - Black Nylon.
CL203W - White Nylon.
An alloy version is also available - CL211 Mk1, as well as variations with a roller fairlead CL203W/S1 and with bottom roller CL203W/S2.
|
|
The cleat has an in-built pulley that offers a compact solution , for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is easy to release is required. The Sailor's preferred choice for adjusting trapeze lines.
Manufactured from aluminium for light weight and durable performance the CL253 is available in two finishes:
1. CL253 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL253AN has a hard anodised finish to give a hard wearing surface.
|
|
The red gate is flipped up by hand to keep the rope out of the alloy cleat and prevent unintentional entry of the rope into the cleat.
The CL237 is a modified CL201.
Also available in Aluminium - CL238.
For larger size ropes, look at the Nylon CL239 or Aluminium CL240.
|
|
|
The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Available in silver or hard anodised finish.
|
|
|
|
|
|
|
|
The combined advances in rope, materials and computer technology has called on all the resources of RWO engineers to meet the challenge and produce the most efficient cleat in the world. Unique teeth progression which has been scientifically tested to offer similar amounts of holding power on small or large rope diameters (Just try and use a smaller line for same application and hold it in your hand to get some idea of the grip required.) On older cam's just one or two teeth attempt to retain the rope which was OK for more forgiving old fashion softer rope, but now with the harder core Hi-tech rope higher loading under tension are resisting deformation. More teeth contact but at less depth means a kinder cleat to rope wear, easier entry and exit. The contoured cam shell is unlike other designs, it is not a compromise, the carbon fibre teeth form direct wedge to the pillar and transfer the load to the fastenings. The rest of the body is sculptured around this and whilst providing a distinct contrasting also forms part of a lubricated fluted bearing. Thus our engineers, together with computer and plastic experts have maximised the use of modern technics resulting in a world beating design.
|
|
Clamcleat rope cleats now need little introduction. The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope which will automatically cleat under load. To release just jerk upwards.
There are now 3 basic models (i) original moulded nylon, (ii) racing aluminium silver coated, (iii) racing aluminium hard anodised.
The nylon models remain best value for where high loads or rope surge are not encountered.
|
|
Camcleats.
Two ranges of cleats suitable for control lines on all sizes of boats up to half ton racing. Maximum use has been made of Hi-tech marine grade materials to cater for modern rope line technology, and a complete choice of accessories are available including top, rear and front mounted fairleads, under deck fixings, angled and parallel bases. Rope guides or fairleads are made of stainless steel or plastic. Rounded to give a smooth entry, they either fit under or over the cleat and are secured by the existing screws.
|
|
|
Top quality CAMLAN, abrasionproof, temperature resistant, easy rope entry and release, complete range of accessories.
|
|
Cam kits include:
Cam-Matic® cam cleat
Pawls open/close easily on ball bearings
Wire fairlead and base
Provide a fair lead; hold line at cleat
Wedges (kits 315, 316)
Angles cleats to 15°
Includes underdeck shim
|
|
The Easiest Cleat to Release
Compact roller action camcleat for easy release of high performance controls and mainsheets
Features and Benefits
- Development of successful PX model
- Three stage adjustable release spring
- Alloy cam and base surfaces as standard
- Ultra compact low profile design
- Stainless steel rope guides provide wide operating arc
- Integral 6 degree wedge
- T-Series for retrofit in hole centres of traditional cam cleats
- SW-Series swivel mounted PXR
- VP-Series mast mounted PXR
|
|
ALUMINIUM CAM CLEATS:
Available in two sizes for lines up to 14mm. A well proven design extremely strong and rugged, finished in hard anodised satin finish. Bases and fairlead options are stainless steel.
BUDGET CAM CLEAT:
Of the same design as our 'K' Cam, this low cost range features cams moulded from glass-reinforced nylon in light grey. An inexpensive cleat ideal for light applications.
Line dimensions and applications are as for 'K' Cams. All 'K' Cam accessories are compatible.
|
|
|
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fibre composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
|
|
Atlantic Marine system features non-corrosive materials specifically selected for their suitability in marine environment and subject to strict quality control at every stage of construction.
Aluminium chassis:
Chassis are made of aluminium marine alloy 6005 and designed as truss-frame. Longitudinal beams are custom-built extruded section (5 to 14 kg/m) while transversals and diagonals are Rectangular (R.H.S.) or Square Hollow Sections (S.H.S.). All members are assembled by MIG welding.
|
|
|
|
|
|
|
PUSH BUTTON MOORING LINE RELEASE
Imagine being able to release your boat's mooring lines at the press of a button. No more turning your guests into crew. It provides complete control at the push of a button. The AutoCleat will release any line configuration - loop, figure 8 or slip knot.
CLEAR DECKS AND PASSAGEWAYS
Smart boat design means clever utilisation of every space and surface available. The AutoCleat provides a strong, secure mooring point while berthed and when not required, retracts flush at the push of a button leaving those valuable surfaces uncluttered. No more stubbed toes and no more snagged fishing lines or halyards.
DESIGNED AND BUILT TO LAST
Cast from a high strength, corrosion resistant stainless steel, the horns of the AutoCleat give exceptional high side-load carrying capacity. With the remaining components manufactured from marine grade materials and composites, the AutoCleat comes complete with a 3 year warranty against manufacturing defects.
THE ULTIMATE CLEAT
The AutoCleat is the only mooring cleat that allows you to release your mooring lines, regardless of how the line is secured to the cleat and also retracts flush into the deck. International patent pending.
SIMPLE AND STRONG INSTALLATION
The AutoCleat has been designed with the home handy-man in mind. In less than 20 minutes using some basic tools, the AutoCleat can be installed and fully operational. Only two low amperage wires are required to power up the AutoCleat. The AutoCleat gains strength from being fixed into the deck of the boat.
THE LITTLE EXTRAS
Due to the unique design of the crossing 'horns' the AutoCleat secures the mooring line above the deck not on the deck and thus reducing line wear on the boat. The AutoCleat comes standard with a Power Failure Over-ride (PFO) button located in the deck plate. The PFO allows the unit to be operated in the event of boat electrical power failure, always providing a secure mooring location. For more informatiion visit www.strongmarine.com
|
|
|
Our mooring cleats are manufactured from cast manganese bronze and are available in a polished or marine quality chrome plated finish. Four hole mounting on twin oval bases. Available in 6", 8", 10", 12" and 14" sizes.
|
|
|
|
