|
|
An extensive range of hooks which have countless industrial and marine applications.
The stainless steel hooks are highly polished whilst the moulded ones are black or white nylon.
All surface mounted hooks except R8492 are open, whereas the attachable ones are either open or spring closing.
|
|
- Standard type.
- Working loads shown are according to manufacturer's data and is dependent on application.
|
|
Custom-built rectangular and square carbon fiber tube is available from carbon-tube.com (a division of C-Tech Ltd). Please provide the following information when requesting a quote:
- ID (millimeters)
- Wall Thickness or OD (millimeters)
- Length (millimeters or meters)
- Quantity
- Purpose the tube is required for, or some idea of strength requirements.
|
|
Stock and custom-built round and oval carbon fiber tube is available from carbon-tube.com (a division of C-Tech Ltd). Prices for available IDs and standard wall thicknesses are available on the website (http://www.carbon-tube.com). For non-standard wall-thicknesses or IDs not listed, please provide the following information when requesting a quote:
- ID (millimeters)
- Wall Thickness or OD (millimeters)
- Length (millimeters or meters)
- Quantity
- Purpose the tube is required for, or some idea of strength requirements.
|
|
New Hardware for CT22 Battens: Receptacles
CCLR: Clam-shell Carbon Luff Receptacle is designed specifically to be used with a bolt-rope mainsail. A plastic insert is sewed inside the batten pocket to position the batten. Tough outer shells fit on either side of the sail to hold the batten in place. The CCLR is designed to fit CT22 battens but it can also be used with similar sized fibreglass and pultruded battens.
Key Features: CCLR
- Outer shells made from carbon fibre
- Plastic insert for holding batten in place in pocket
- Available in both non-adjusting (CCLR) and adjusting (CCLR-A) formats.
- Light weight: CCLR = 80 grams, CCLR-A = 105 grams
- Adjusting screw thread for tensioning batten on deck or while sailing (maximum adjustment: 30mm)
|
|
|
|
|
|
|
New Leech Tensioners - FTLT / PALT
FTLT: The Fish-Tail Leech Tensioner was originally designed as a tensioning system for America’s Cup mainsails. Light-weight, sturdy and easy to use, the FTLT is also being used by racing yachts from 40-90ft.
PALT: By designing an alternative head-cap the same tensioning components can now be used on larger yachts. The PALT (Plastic Adjusting Leech Tensioner) has grooves which allow lashing to pass either side of the tensioning screw, securing the batten firmly in the pocket.
FTLT - used with CT33 battens
PALT - used with CT33, CT33S, CT36 battens
Key Features:
- Made from tough acetyl plastic
- Lightweight and strong
- Titanium hex-head adjusting screw
- Leech end-plugs with 45mm shank available in 3 sizes
- Extended leech end-plugs with extended head/shank can be used for additional batten adjustment or lengthening [available on request]
- Batten can be tensioned on deck (maximum adjustment: 40mm)
- Thread length for FTLT: 40mm
- Thread length for PALT: 60mm or 100mm
- Weight: 75 grams
|
|
ACLR (Adjusting Carbon Luff Receptacle) is a lightweight carbon fibre receptacle to suits yachts in the 40-65ft range. It attaches to one side of the sail with a solid carbon fibre backing plate fixed with small stainless steel bolts.
- Made from carbon fibre and acetyl plastic
- Lightweight and strong
- Ideal for closed leech batten pocket
- Side exit for easy batten removal
- Batten tension adjusted with a hex-key from the front (max. adjustment: 40mm)
- Can be tensioned without detaching receptacle from batten car
- Fits M-10 or M-12 (metric coarse) stud thread
- Attaches to one side of sail with solid carbon fibre backing plate
- Weight: 300 grams
|
|
|
|
|
|
|
The Adjusting Aluminium Luff Receptacle is suitable for larger yachts maxis and superyachts between 80-140ft. Designed to suit the rectangular shape of CT Sailbattens the AALR is easy to use and allows batten tension to be adjusted on deck or while sailing. The AALR is mounted on one side of the sail and has anodised aluminium backing plates on the other side, fixed with small stainless or titanium bolts. As the receptacle has a removable side-plate, battens can be luff loaded if desired.
Battens suitable for AALR Receptacles
CT33
CT33S
CT36
Size of yachts using AALR Receptacles
Yachts 80ft - 140ft
Key Features
-Machined from aluminium then anodised
-Ideal for closed leech batten pocket
-Battens can be luff- or leech-loaded
-Adjusting screw thread for tensioning batten on deck or while sailing
-Can be tensioned without detaching receptacle from batten car (maximum adjustment: 45mm)
-Stainless steel boss to suit M-12, M-14,or M-16 (metric coarse) stud threads
and ball fittings
-Designed to be mounted on one side of sail which forces sail to deform around
receptacle, effectively placing batten closer to the centreline
-Weight: 900 grams (approx.)
|
|
Hardware for CT22 Battens: Tensioners
RSLT: Rocket-Style Leech Tensioner is light-weight, adjustable and easy to use. It can be used as a Leech Tensioner (on a bolt-rope mainsail) and as a Luff Receptacle with closed-leech mainsails. The RSLT is designed to fit CT22 battens and is suitable for yachts from 40 – 55ft long.
Key Features: RSLT
- Made from carbon fibre
- Ultra lightweight and strong (63 – 70 grams)
- Designed to fit over CT22 battens for luff or leech tensioning
- Can be used with closed leech or open leech pockets
- Adjusting screw thread for tensioning batten on deck or while sailing (maximum adjustment: 30mm)
- Fish-tail shaped end for webbing to hook over, holding fitting and batten firmly into batten pocket
|
|
APLR: Adjusting Plastic Luff Receptacle is a lightweight acetyl plastic receptacle suitable for yachts from 30ft long up to Superyachts. It attaches inside the batten pocket (on the centre-line of the sail) with acetyl backing plates, fixed with stainless steel bolts.
APLR models are now available for the full CT Sailbattens range:
- APLR22.M10 – used with CT22 battens
- APLR33.M12 – used with CT33, CT33S battens
- APLR33.M14 – used with CT33, CT33S battens
- APLR36.M14 – used with CT36 battens
- APLR36.M16 – used with CT36 battens
Key Features:
- Made from acetyl plastic
- Lightweight and strong
- Can be used with a closed leech batten pocket
- Adjusting screw thread for tensioning batten on deck or while sailing (maximum adjustment: 40mm)
- Can be tensioned without detaching receptacle from batten car
- Can be used inside batten pocket or on one side of the sail
- Available in M10, M12, M14 and M16 thread sizes
|
|
The Seldén RCB (Round Circulating Ballbearings) full-batten system facilitates full-batten sail management, and makes it much easier to set and reef the mainsail. The System is based on linear ball races and recirculating balls. The cars run with hardly any friction at all, even under the high compression loads produced by full-length battens.
The track and cars are made from aluminium which, together with Torlon ball bearings, makes the system strong and durable.
|
|
- Ideal for composite spars.
- Used with wing masts.
- Suits gates that are proud of sail track.
- Flat and round batten options with integral tension adjuster.
|
|
FACNOR 'S solution to easy handling of a fully-battened mainsail. The system consists of recirculating ball bearing cars resulting in quick, smooth, effortless raising and lowering of the mainsail.
The FACSLIDE system consists of :
lengths of tracks
one headboard car
batten car for each batten
intermediate cars between each batten.
All cars are fitted with ball bearings
|
|
- Cast Stainless Steel, electro-polished.
- Low friction PTFE coating.
|
|
| ... products without information |
| |
|
Appearance like hemp, however it is softer and has better weather resistance, carries heavier loads while quality stays the same, UV-resistant.
|
|
|
LIROS ClassTech is available in large diameters for super yacht classic sailors. It's light weight makes it suitable even for larger classic yachts. LIROS ClassTech is available in a lot different sizes for all ambitious sailors on classic boats.
|
|
Fendequip Rope ‘Anti Chafe’ Covers
Specially designed to fit any size of rope or line, Fendequip Rope Covers are made from the same premium quality soft loop fabric as our Fendercovers. With a full-length Velcro fastening, they are quick and easy to fit, non-absorbent, quick drying and stain resistant. Available in standard 1-meter lengths.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order.
Part of the Fendequip range of marine accessories.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
