|
|
|
High quality, abrasion resistant Classic-Line, also suitable for winches and halyards. Available in 3-strand or double braid
|
|
Appearance like hemp, however it is softer and has better weather resistance, carries heavier loads while quality stays the same.
Spun Polypropylene, UV-resistant.
|
|
| ... products without information |
| |
| ... products without information |
| |
Here's a handy boat that can be rowed, sailed, and powered with up to three large adults, and it "nests" to take up less space.
Length: 3.53 m, Beam: 1.42 m, Weight: 41 kg.
The Passagemaker Dinghy is easy to build but looks great and performs beautifully. A smooth glide when rowing, spirited performance when sailing, and steady handling with an outboard mark this latest entry in our fleet of graceful build-it-yourself boat kits.
This is the perfect dinghy for folks with larger boats. Are you tired of moving heavy, traditional dinghies that weigh 100 kg, or struggling with a limp, awkward inflatable that can't be rowed or sailed? Chesapeake Light Craft designer John C. Harris has drawn an elegant, Norwegian-styled pram that weighs only 90lbs, but can survive real abuse in the dinghy park. With a 650-pound payload, the Passagemaker can haul the entire crew in one go, or ferry blocks of ice and jerrycans of drinking water from the quayside to the mothership. The sailing rig components store flat inside the 3.53 m hull; fasten three shrouds and the mainsheet, hoist up the mainsail and jib, and you've got a fast, fun, stable sailing dinghy that will please even the most ardent and discriminating sailing enthusiast. If you have a long harbor to cross, a 2, 3, or 4 horsepower outboard will drive the Passagemaker to harbor speed limits and beyond. An electric outboard for fishing lakes will work great, too. If you don't want to lug around an outboard and smelly gas, you'll be delighted to discover how well the Passagemaker rows: there's plenty of rocker for low wetted surface and the transom won't drag in the water to slow you down.
|
|
Laïta is inspired by the Norwegian prames which, because of their nautical qualities, were spread in the whole world like boats of ships, then like small boats of pleasure at the beginning of the 20th century.
Near to a small light sailing dinghy by its behavior and its performances, it makes it possible to lower the mast and to sail with the oar when the wind misses. The forms carrying prame, the possibility of taking laugh in the sail make of it also a sure, ideal boat for young people or children. Its behavior with the sea is healthy with all the paces. Its walk is remarkable out of sheltered water
|
|
--
PRICE: $6290 USA
--
WHERE TO BUY:
Europe: vickie@therowingcompany.co.uk
Elsewhere: Factory Direct from Florida, USA! We ship all over the world!
Dealer inquirys invited. bill@littlerivermarine.com
--
This Lightweight rowing skiff is specifically designed for sliding seat rowing, yet also can be sailed or fixed-seat rowed. Built of a double liner for stiffness, the Heritage 12 has enormous flotation; enough to be filled with water and still float 2 to the adults. Patented fold-in riggers hold the sculling oarlocks out to the correct width, but fold in for docking. There is also a built in option to move the rower to the bow to balance the weight of a passenger.
|
|
|
Jimmy Skiff : three boats for the price of one! Indeed, this little bare simple sailer is also an excellent rowing boat as well as a light tender... for when you'll have the main boat. Before the advent of the outboard motor, rowing/sailing skiffs were common on the US shoreline, and especially in the Chesapaeke Bay. They were used for crabbing, fishing, transporting goods, and enjoying summer evenings with a friend. Many local kids could row their dad's skiff long before they could ride a bicycle. Proper rowing and sailing skiffs are extraordinarily rare these days.
|
|
The sailing model of Whitehall Spirit 14 rowboat delights everyone from the beginner to the most ardent sailor with it’s ability to sail comfortably with two or three adults aboard. It features an attractive standing lug rig with varnished sitka spruce spars and booms, teak blocks, and sails by UK sailmakers. A solid teak kick up rudder and and drop daggerboard are standard. A cast bronze kickup centerboard is available.. The aft bench thwart is removable while sailing and can be replaced easily if the wind drops converting it back to into the best available double position rowboat that handles from one to four people..
It is available with an option of one or two easily installed or removed sliding seat sculling units and bronze hinged outriggers which convert it to a sliding seat sculling boat.
These boats are built to impeccable standards with lapstrake style fiberglass hull with solid teak woodwork and bronze fittings. They will handle serious usage in rough ocean conditions and are built to last generations.
|
|
|
The Skerry is one of the few rowing hulls which are not "spoiled" by the required installations to make it an excellent sailboat. It is the boat for long treks: sailing when the wind is good, rowing when not. In both cases, you'll be going far and fast! The sprit rig is easy to set and to use, powerful for its size, and all the spars are short enough to be stowed without hampering rowing. The hull is stable and offers sufficient of buoyancy to face a good chop with 3 adults on board. Two rowing stations allow several crew combinations while under oar, always keeping the best hull balance for optimum handling. The Skerry is 15 ft long (4,58 m) by 1,37 m, with a draft of only 13 cm (76 cm with the board down). The sail area is 5,40 m2 (a larger sail, 5,70 m2, is available as an option). The hull weight is 45 kg: no problem to carry it on the small car roof rack!
|
|
|
Tradition does not exclude modernity. Minahouët is conceived to be accessible to a greater number of manufacturers by means of a kit containing plywood cut out on numerical machine. Gauges imbricating itself one in another make it possible to assemble as of the first day a mannequin of a high degree of accuracy. The parts of plywood, including bordered with covering joint are delivered in near total to the exact dimension and do not require any fitting: good-bye doubts and interrogations of the tracing and squarings. Epoxy resin, though used with moderation, gives longevity and weak maintenance. In finale the massive wood completions make forget the recourse to materials and techniques modern.
|
|
The sailing model of Whitehall Spirit 17 row boat delights everyone from the beginner to the most ardent sailor with it’s ability to sail comfortably with three or four adults aboard, carry picnic supplies or camping gear, and sail in shallow water due to its kick up rudder and bronze centerboard . All the midship bench thwarts are removable for ease of crew movement while sailing and can be replaced easily if the wind drops converting it back to into an efficient rowboat with three traditional rowing stations that handles from one to five people.
It is available with an option of one or two easily installed or removed sliding seat sculling units and bronze hinged outriggers which convert it to a sliding seat sculling boat.
These attractive boats are built to impeccable standards with a lapstrake style fiberglas hull solid teak woodwork and bronze fittings. They will handle serious usage for generations.
|
|
| ... products without information |
| |
We fondly refer to the sailing model of the Westcoast 11'6" row boat as "The Adult Dinghy" because there's room for one large adult in the aft area between the seats and two more with a picnic basket forward of the mid-seat either side of the centerboard well. Why should kids have all the fun?
The Westcoast row boat is rigged with a standing lug sail with a 56 square foot sail. It features a teak kick-up rudder and pivoting bronze centerboard. A removable bowsprit and jib is also available.
This row boat handles and performs superbly under sail in both light and high winds. The hull shape forward produces a lift effect when gunnel down, hard on the wind. This makes it harder to drive the gunnel under and keeps the interior dry. Off the wind the Westcoast just scoots along and is a joy to be aboard.
The sailing model is also available with an optional slide seat unit which adds the ability to use the boat for getting a full body workout doing slide seat sculling.
|
|
This sprightly little sailing dinghy is a throwback to the days when a sailboat wasn't a sailboat unless it had at least two sails, no matter its size. Yet, here is the sloop rigged Tribute with modern lines, produced of contemporary materials and methods.
Its modest dimensions (13'2" length) belie its capacity for sailboat fun. This is a sailboat that was designed to be easily sailed by one person but will carry up to 3. The Tribute has a generously sized cockpit with molded in fore and aft seating. All corners and edges are rounded for maximum comfort.
The Tribute comes standard with these features:
Harken blocks and fittings
Roller furling jib
Loose footed main sail
Molded in mast well
Cockpit drain with plug
Swing-up rudder with tiller extension (hiking stick)
Rotationally molded dagger board
Molded in transom handles and bow cross hole
|
|
The sailing model of Tyee Spirit 14 rowboat offers a little more room than a classic Whitehall Spirit 14. It sails very comfortably
with two or three or even four adults aboard. It features an attractive standing lug rig with varnished sitka spruce spars and booms, teak blocks, and sails by UK sailmakers. A solid teak kick up rudder and and drop daggerboard are standard. A cast bronze kickup centerboard is available.. It is also a high performance single or double position traditional rowboat that carries from one to four people..
It is available with an option of an easily installed or removed sliding seat sculling unit and bronze hinged outriggers which convert it to a sliding seat sculling boat.
These boats are built to impeccable standards with lapstrake style fiberglass hull with solid teak woodwork and bronze fittings. They will handle serious usage in rough ocean conditions and are built to last generations.
|
|
| ... products without information |
| |
|
|