|
|
|
The Profurl in-boom furlers are dedicated to furling, raising and lowering fully battened mainsail. Hoisting or reefing the mainsail is a simple and safe operation as the control of mainsail is performed from the safety of the cockpit thanks to the furling line. As the opposite of other systems, the Profurl in-boom furlers are designed also to increase boat performances by reefing fully battened mainsail with a standard roac
|
|
Schaefer Marine's Boom Furling System is the result of years of research, design and sailing. Proven over thousands of miles of use, our unique Patented Articulating Sail Track enables you to reef or furl on any point of sail all from the safety of the cockpit.
It is the most advanced solution for mainsail reefing and furling. The unique Sail Track and feeder combine to precisely transfer any full battened main to the mandrel located within the boom - without snags or jams - and with battens perfectly aligned.
Equally significant, reefing is easily and safely accomplished by one person on any point of sail - without changing course, heading up into the wind or leaving the cockpit.
Boom furling has always been a great idea. It took Schaefer engineering to make it a flawless one.
|
|
Selden booms have a wealth of sophisticated features and can be equipped with a variety of reefing systems to suit different boats and the needs of different sailors. The booms can be fitted for traditional slab reefing or Single Line Reef, or be used for furling masts. The boom extrusions are relatively deep in relation to their width, allowing a lighter extrusion with high resistance to vertical bending. This makes them perfect for use with modern, stiff sailcloth and efficient Rodkicker rigid vangs.
|
|
|
Standard or custom, aluminium or composite, traditional or motorized, the Sparcraft booms are optimized for your boat. Their design, manufacturer and ease of operation thanks to our experience, will be appreciate under sail.
|
|
|
All Sparcraft boom sections are available for furling masts. Outhaul cars are mounted in or on top using tracks.
|
|
Carbon composites are known for their:
High fatigue tolerance
Stability under environmental exposure
Exceptional strength to weight
All these features make carbon composites attractive not just for the construction of mast tubes and fittings, but also for standing rigging.
Composite Rigging installed the first full set of Element C6 carbon composite rigging on the Farr 52 Georgia in Auckland in March 2003. This set includes all shrouds, jumpers, running backstays and headstay. These pieces now have over five years of service without incident.
Since that time EC6 has been installed on a variety of yachts ranging from 30’ sport boats to 50+ meter Megayachts.
The first set of EC6+ continuous rigging was installed on the Farr 60 Numbers in the spring of 2005. More recently the Open 60 Paprec-Virbac won the Barcelona doubled handed nonstop round the world race with EC6+ carbon shrouds. Post-race testing confirmed that there was no strength degradation. The rigging has been refurbished and reinstalled for the next event.
|
|
Established in 2004, our One Design business is dedicated to supplying production rigs, from high performance dinghies up to 60 foot performance cruisers. We apply the lessons learned at the grand prix end of the spectrum to create superb high performing consistent production rigs. Our tools are scientific analysis, sound knowledge and a passion for high performance yachting.
Southern Spars One Design is committed to producing high performance carbon rigs with an emphasis on value for money - spending money where it counts. The experience from 15 years of building the most successful custom carbon rigs in the world is being used in the manufacture and design of production One Design rigs.
|
|
|
Hall Spars & Rigging VBoom is an elegant alternative to the furling boom. The unique V shape captures the mainsail beautifully, and there are no internal parts to service.
|
|
|
Hall seamless carbon-fiber spars are light and strong, and tested around the world on racing boats from Cup racers, Volvo 70s, TP52s to J24s.
|
|
SPARS, POLES & TUBES
We have amassed a broad selection of mandrels over the years and can provide spinnaker poles, bow sprit tubes and whisker poles for just about any boat from 14 to 90 feet.
|
|
Gybe safely with Gyb'Easy, the new Wichard boom brake
Why a boom brake? Gybing remains one of the most challenging operations on a sailing boat even for experienced sailors and can possibly generate injuries and material damage. Gyb'Easy is an efficient and safe solution to reduce such risks.
Concept: Thanks to the frictions of the specific line called Gyb'Flex passing over the boom brake, the boom is allowed to gybe smoothly and without jerks. The more the line passes over the openings, the more the friction is increased and hence the brake efficiency.
Settings of the Gyb'Easy: The adjustment is made thanks to the tension of the line. 3 different positions exist for a better adaptation of the mainsail and wind conditions.
Easy installation: It takes a few minutes to install it on a eye strap of the boom. Two different fittings can be implemented to fit with all the deck configurations.
|
|
A full range of WALDER® boombrakes,
are available for all size sailboats
|
|
A full range of WALDER® boombrakes,
are available for all size sailboats
|
|
A full range of WALDER® boombrakes,
are available for all size sailboats
|
|
A full range of WALDER® boombrakes,
are available for all size sailboats
|
|
A full range of WALDER® boombrakes,
are available for all size sailboats
|
|
A full range of WALDER® boombrakes,
are available for all size sailboats
|
|
| ... products without information |
| |
|
|
