|
|
Our Open Array Power Mounts are constructed the same as our Power Mounts with high quality marine grade aluminum and finish with a brilliant white powder coated finish. All Open Array Power Mounts have an 8" x 8" square base and a 20° Aft leaning profile. Our newest Open Array Mount includes a heavy duty bolt on light for boats bar which accepts all of our Power Mount Accessories
|
|
The adjustable marine radar arches accommodate 14” - 18” satdomes and bridge over any closed radome or 4’ open array radar. These arches are constructed of high quality Marine Grade Aluminum, treated with a three stage marine primer and finished with a brilliant white powder coat.
Optional DM-light bars shown in accessories. |
|
Similar to our Power Mounts Plus, these mounts are constructed of high quality marine grade aluminum and treated with an anodized marine primer then finished with brilliant white powder coated finish. Our Standard Power Mounts have a 7" square base, with a 20° aft or 20° forward leaning profile. Each unit has a waterproof radar cable for boats gland positioned aft and below the top for boats plate. Unlike our Power Mount Plus these Standard Mounts are not Light/GPS Bar capable. *Universal Fits: Furuno, Koden, JRC, Northstar & Lowrance 15-18" radar domes.
|
|
Based on our unique ellipse extrusion, Scanstrut's Aluminium PowerTower is designed to raise your marine antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Available in a forward leaning profile for radome installations and an aft leaning profile for open-array installations.
Features
- Hollow stem to route cables for boats neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top for boat plate for boat using own mounting bolts |
|
| Constructed from high grade carbon fiber this aft leaning tapered mast for boats offers an universal radar mounting plate to fit all 2kW and 4kW marine radars. The PMA-100C is equiped with spreaders that can receive BOAT GPS or other accessory. The sailboat top plate is drilled and tapped to accept Aqua Signal 40/41 light for boats, the base plate measure 10'x10' and the mast height is 30'. This elegant light weight mast not only offers a stylish addition but a lasting investment to any yatchs. |
|
Offering a single "monocoque" structure for outstanding strength and surface finish, Scanstrut's Composite PowerTower is designed to raise your boat antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.
NEW design for 350mm version - even greater strength to suit for boat all new generation radomes.
Features
- Hollow stem to route marine cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower sailboat top plate for boats using own mounting bolts |
|
| Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat buildings, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. |
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom marine antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas |
|
When building a Raymarine C-Series or E-Series Radar System you have your choice of either Open Array of closed Radome scanner. Both Radomes and Open Arrays are fully compatible with every every multifunction display and deliver unparalleled performance. To help you decide which antenna for boat is right for you we have listed the advantages of each scanner type below.
|
|
| Universal light/GPS bar for all Power Mounts ending in "L" and pole marine tops. LTB is easily attached to the Power Mount using unique Q-lock system. (must order LTB separately).This one of numerous accessories available for Power mount and Power mount PLUS |
|
Self Levelling Boat radar mount - Boat mast
Our Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna for boat performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations.
Features
- Hydraulic damping to eliminate minor oscillations
- Sealed system - entirely maintenance free
- Passive system - no power required
- Reduced weight aloft - complete system weighs only 3.4 kg
- Easy upgrade from fixed mast mount - same mounting footprint as SC20 & M92722
- Attached to mast by four swivel ffet - matches the profile of any mast
- 12 point fixing - highest quality monel rivets
- Compact mount - radar extends only minimum distance from front of mast |
|
Scanstrut's Stainless PowerTower® is designed to elevate your antenna for boat from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Created using a highly polished stainless steel, this makes a great looking installation on any boat.
Features
- Hollow stem to route marine cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top for boats plate for boats using own mounting bolts |
|
The GMR 406 open array radar (boat pedestal sold separately; click on accessories tab to view pedestal) allows you to scan more of what's out there while you're on the water. Whether boat ships, shores, birds or weather, you'll see it sooner with the powerful 6-foot GMR 406 and its smaller counterpart, the GMR 404.
The GMR 406 is a 6-foot open array scanner with 1.1° beamwidth and a range of 72 nautical miles. With this intense beamwidth and 4 kilowatts of power, the 406 offers outstanding clarity, precision and target definition. You can also use the 406 to avoid traffic on the water with MARPA target tracking. |
|
The GMR 404 open array radar (boat pedestal sold separately; click on accessories tab to view pedestal) allows you to scan more of what's out there while you're on the water. Whether marine ships, shores, birds or weather, you'll see it sooner with the powerful 4-foot GMR 404 and its larger counterpart, the GMR 406.
The GMR 404 is a 4-foot open array scanner with 1.8° beamwidth and a range of 72 nautical miles. With this beamwidth and 4 kilowatts of power, the 404 offers outstanding clarity, precision and target definition. You can also use the 404 to avoid traffic on the water with MARPA target tracking. |
|
| Today's tactical environment demands an I- Band radar that is able to provide superb performance in clutter for navigation safety, the detection of the small fast attack craft (FIAC) threat and the tracking of small helicopter targets. SharpEye™ meets these requirements and has been developed as the world's first new technology I-Band navigation and surveillance radar. |
|
| Kelvin Hughes' F- Band SharpEye radar is able to provide superb performance in clutter for navigation safety, the detection of the small fast attack craft (FIAC) threat and the tracking of small helicopter targets. SharpEye™ meets these requirements and has been developed as the world's first new technology I-Band navigation and surveillance radar. Incorporating the latest in solid state, pulse doppler and signal processing technologies, SharpEye™ offers performance previously only possible in extremely expensive military or civil aviation surveillance radar. Combining this with the reliability of a completely solid-state solution gives SharpEye™ the edge in this demanding market. |
|
| Hall Spars & Rigging's carbon-fiber radar bracket features a unique dampening system. The system is adjusted to eliminate the "swing" when tacking, allowing the radar to move quietly and under control to the new tack. It also eliminates the pendulum effect when the boat is at boat anchor. It's very light for boats weight and a stylish addition to your boat mast. |
|
Excalibur 7 speed is a chartplotter with an excellent quality-price relation. The easy to use software and the internal electronics are the result of huge technological improvements. Especially the latest version is in no way inferior to the more expensive models, for what speed and functions is concerned (echo sounder system, fish finder, etc…)
The big black and white high contrast LCD boat screen and the precision of its external Marine gps antenna allow an intensive outdoor and indoor usage. It can be either built in the dashboard or installed on the special bracket.
This instrument is especially made for those who want to start their magnificent navigation experience buying low priced LORENZ products
|
|
Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting marine radars on yatchs boat masts.
Raising the boat antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.
NEW mounting foot design for 2008 - even easier installation.
Features
- Easy and quick to install with all fastenings supplied
- Attached to mast by four swivel feet matching the profile of any mast
- 12 point fixing using highest quality Monel rivets for a secure installation
- Nylon washers for all fastenings to protect paint for boat finish
- Waterproof cable for boat grommet included to seal cable entry into mast |
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. Please fill out the form below to start the process.
|
|
| Our Marine satellite antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top for boats, then treated with an anodized marine primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5. |
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom boat antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover for boats strip to hold cables for boats in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck |
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas for boats
- Recommended minimum of 0.6m / 20" below deck |
|
| SEAVIEW Mast for boats Boat platforms are made from heavy duty die cast aluminum and finished with a brilliant white powder coat. Each mast platform is supported by heavy duty swiveling mounting brackets that will accommodate a 2" diameter mast and larger, all mounting hardware is high grade stainless steel. SEAVIEW has a mast platform for all radome brands. |
|
|
|
