|
|
|
QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third color. At 25°C (77°F) QuikFair is sufficiently cured to be hand-sanded in 3 hours or machine sanded in 4 hours. This allows the user to apply three coats each 24 hours in a standard eight-hour shift or six in a round-the-clock basis.
|
|
TIKAL FAST PATCH is a 2 component, quick hardening epoxy putty for boat building materials such as GRP, wood, steel or aluminum in the overwater and underwater area.
TIKAL FAST PATCH is easy to mix and is also suitable for the restoration of osmosis damage due to its minimal water absorption.
TIKAL FAST PATCH is excellent for quick repairs and profiling work in small areas.
TIKAL FAST PATCH can also be used due to its light visual hardening on most boat hulls as quicker repair putty.
Storage: 12 months in the original closed container
Processing temp.: +5 °C to +35 °C
Working life: 20 minutes
Hardening time: 3 h, depending on the temperature
|
|
|
Resistant to weathering, saltwater, and stresses caused by joint movement. Seals between mechanically fastened joints on wood, fiberglass, metal and most plastics above and below the waterline.
|
|
| ... products without information |
| |
Defend your transom area above the swim platform with this easy to install, shock absorbing, clear UV stable urethane polymer protector that is only 12mil. thick.
Protects the transom areas above the swim platform from the cracks, chips, scratches and scars caused by water-skis, wakeboards and all types of water sports equipment.
Available in three widths and is as simple to apply like any other graphics and can be cut to fit any boat width, around tow eyes, deck showers, cleats and tie downs.
|
|
Guards while beaching against sand, rocks and concrete ramps.
Prevents gelcoat or fiberglass repairs.
A revolutionary marine product, it is made of urethane with uv-inhibitors not a blend, PVC or PVC-based Polycore.
Comes ready to install complete with the strongest and thickest 3M Marine adhesive systems available. You supply paper towels and isopropyl alcohol.
Product testing shows that our patented grooved design actually enhances performance by adding directional stability on all boats and improving water flow to the impeller on jet-driven watercraft.
|
|
A one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20ºF (-28.9ºC) to 120ºF (-48ºC) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, all plastic including Lexan. ABS, and Starboard. Simple clean up with mineral spirits.Not recommended for wooden deck seams or use is areas subject to gasoline.
|
|
|
TIKALFLEX joint contact 20 is particularly for the joining by teak staff decks laid out UV-steady and shrink-free SPPO adhesive. Air humidity-hardening, TIKALFLEX joint contact 20 to a sharpenable elastomer. By the use of raw materials on SPPO basis (silane-scheduled polypropylene oxide) TIKALFLEX joint contact 20 almost hardens shrink-free (under 0,3 %). Conventional sealing materials for the joining of teak staff decks on 1 K PU basis shrinks between 5,0 % and 7.0 %!
|
|
|
n°1 selling marine sealant - 100% marine grade silicone, won't turn yellow - Remains flexible from -70°F to +480°F - Bond's to fibreglass, plastic, wood, glass and metal - Unaffected by sunlight, weathering, most chemicals and solvents - Will not shrink or sag - Can be removed easily - excellent for deck hardware - Special marine formula can be used above and below the waterline - Dries tack free in less than one hour, cures completely in 24hours
|
|
| ... products without information |
| |
| ... products without information |
| |
TBS SPEED GRIP : lightweight self-adhesive non slip covering for racing yachts, sailing dinghy.
This micro-alveolate elastomer has a very high coefficient of friction, which allows to keep foot in position.
|
|
|
TBS Transparent self-adhesive, thickness 1mm, recommended to keep the apparance of your surfaces such as glazed wood, boat deck...
|
|
TBS Non-slip adhesive tape packaging in retail sleeve.
Wide choice of references, sizes and colours.
|
|
Adhesive tape : a wide choice of thicknesses, packaging until 1.28ml of wide and colours.
Different applications : footbridge, roof, cockpit, boat deck, descent of cockpit...
|
|
COELAN - ANTISLIP - PUNCHED TAPE
10 m roll
12 rolls = 1delivery unit
|
|
|
Thanks to these special forms grooves in the accession of the bands is much better than competing systems. The product is deliberately flexible, it will readily embrace the curvatures of the surface on which it poses, it is evident that the support surfaces are properly aligned and fair so that marking is visible.
|
|
|
StepSafe™ will retain its grip wet or dry, and is resistant to gas, oil, and UV rays, We've combined Toughtek™ with a soft padded feature for a safe, secure climb aboard. Also great for the pool area, aluminum ladders, or any surface where slipping is a concern. Comes with a pressure sensitive backing for easy installation, and trims easily with scissors to almost any size and shape. Use on Gunnels, Swim platforms, Stair Rungs, Transoms or Anywhere you step and could slip! 12 Pack master comes pre-packed clipped on a clip strip.
|
|
|
This mineral coated, slip resistant material features a highly durable surface. Low profile design reduces trip hazard.
|
|
|
|
see the results for the following category : 
