|
|
The Johnson Pump TA3P10-19 Macerator pump takes care of the toilet waste, shredding it before it is pumped into or out from the holding tank.
Features
- Ignition protected motor, conforming with ISO 8846 Marine
- Mounting bracket for easy replacement
- Extremely energy efficient
- Rotary cutter casing of PET (thermoplastic polyester)
- Directly connected to sewage line or holding tank
|
|
SHURflo’s new Macerator pump is designed specifically for sanitation waste and fish box evacuations. This high-powered pump incorporates our high quality motor with a new seamless shell and splash proof design. Featuring a premium impeller design, including o-ring sealed end bells and sealed manual turn key. SHURflo’s unique dual blade and housing construction ensures problem free pumping. Delivering 13 GPM [49 LPM]. Thermally protected. Ignition protection. Available in 12 and 24 Volts.
|
|
|
The powerful performance of VacuFlush sanitation systems centers on vacuum generator technology. Dometic's continuing development of vacuum generation systems is making VacuFlush a fast-growing name on more boats than ever. Choose from these vacuum-generating technologies.
|
|
Specially engineered to greatly reduce sound emissions, SeaLand vacuum generators open new installation options for boatbuilders and renovators. Low-profile vacuum generator allows use in a wide range of hulls. Separate vacuum pump and tank components also add installation versatility.
|
|
These are the ultimate sewage handling diaphragm pumps. They get tough jobs done quickly, quietly, and reliably. Ideal for holding tank discharge applications, transfer systems, and for batching sewage into our Tidal Wave Type II MSD's. These pumps are an engineer's dream with their rugged construction and non-clogging flow-through design.
They make a great emergency bilge pump and are also ideal for industrial applications such as ground water remediation, abrasive fluid transfers, and dewatering.
|
|
WASTE EVACUATION
The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation
It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.
FISH BOX AND LIVEWELL TANK EVACUATION
The Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.
Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.
|
|
- Self-priming to a lift of six feet
- Flow rate to 6-1/2 gallons per minute
- Rated for continuous duty cycles of up to 1/2 hour ofuninterrupted pumping time (nearly 200 gallons ofsewerage transfer per cycle)
- Motor meets USCG regulation 183.410 and ISO 8846MARINE for ignition protection
- Motor is EMC compliant and CE marked
- Ports accept 1-1/2" hose with room for double bandclamps
- All pump components (non-flexible) are non-corrosiveplastic, stainless steel and bronze
- Diaphragm is made of Santoprene and the valves aremade of nitrile
- Pump housing is made of glass filled nylon
- The motor and gear drive are painted with a durableprotective coating
- A plastic motor splash guard adds additional protection
|
|
|
SANISPLIT is an automatic soil and waste water pumping unit, which collects the water from the kitchen and bathroom and pumps it into the collection tanks, even without the necessary gradient. SANISPLIT includes a powerful and silent centrifugal pump controlled by a pressure switch, which starts the pump as soon as the water arrives in the unit's collection tank.
|
|
|
The Rhine current diverter pump telex 370 is a large, expresses robust and chopper pump suitable for the permanent run. It is not sucking in and must be cultivated by from there either in the deepest place of the tank or be installed more deeply than the tank. A chopper is before-built for the actual pump part, which cuts the material to be conveyed up very finely. In case of maintenance the pump body can be divided very easily and with simple means. Contrary to the diverter pump F it is suitable for continuous operation. From there it Fäkalientanks up to a size of approx. 1 m ³ are ideal for this pump.
|
|
|
This new feature makes accidental run-dry impeller damage a thing of the past
|
|
| ... products without information |
| |
Livewell Pumps
Innovative design includes many new and exciting features including a quick, one hand "push button" motor cartridge removal system, and patented rotatable base.
For Thru-Hull ApplicationsAngled 4" (102mm) Pickup Tube.
|
|
|
The Pro Baitmaster is excellent for livewell or washdown applications in harsh marine environments. It is completely encapsulated by SHURCote a tough waterproof coating protecting it from splashed liquids. Featuring marine tough sealed shutoff switches and ignition protection, the Baitmasteris rated for continuous duty application. The Pro Baitmaster is excellent for livewell or washdown applications in harsh environments. It is completely encapsulated by SHURCote a tough waterproof coating protecting it from splashed liquids.
|
|
|
We sell our products to professionals only...if you are an individual, please don't send any requests. Thank you very much.
|
|
voltage : 220 voltes
power : 1500 litres/mn
pressure :250 mbar/3,6psi
|
|
- Inflates a 4 man dinghy in 1-2 minutes
- Supplied with an adaptor for all major inflatable boats
- Deflates a dinghy flat and ready to pack
- One handed operation
- Airflow 550L / Minute
- 25 Amps Max
|
|
Hi-Speed inflator deflator
The high speed is a high quality unit for the rapit inflation and deflation of all inflatables. Inflates a typical four man dinghy in as little as one to two minutes. Adjustable nozzles have been included for most inflatables and valve types.
|
|
This 110-volt pump will inflate or deflate your inflatable in a hurry. It comes with an assortment of nozzles to adapt to your needs and has a high-volume, low-pressure output to get the job done quickly.
|
|
| ... products without information |
| |
|
|
