|
|
The SP-5 is really eye-catching, but in a good way. This pump is a full two metres high, which ensures that it catches the eye of passing craft right away. It’s just right for locating next to a fuel pump. Here too, the foundation serves as a save-all.
The suction hose can be stored away out of sight in a unit that looks good on any jetty. Suitable for use with a range of payment systems, for sewage, alternatively bilge water pump-out..
|
|
|
A single motor powering two completely separate fluid drainage systems - that’s the secret of the SPC-6 dual pump. This allows for a very compact construction and prevents your oil-contaminated waste water and sewage from mixing with each other. Can be equipped with a save-all foundation that means that oil will not flow into the ground or water during servicing.
|
|
Compact and economical, but not at the expense of performance: that in a nutshell is Seijsener’s ‘basic pump’ for sewage, the
SP-150. It is a compact standalone model that is so small that it won’t obstruct a walkway. The wide hose reel is built into the polyester housing. All components are made from non-corrosive materials and given a special coating where necessary.
|
|
KECO's portable Pumpout cart features a rugged T6-Aluminum frame, 35/55 gallon holding tank and overfill protection. With the ability to turn around in its own footprint, this cart is perfect for almost any size dock.
Options include: Peristaltic or Diaphragm pump, hour meter, trailer hitch adapter, Gas/Diesel/Electric, and One-Touch easy offload.
Flow Rate: 13-25 gpm
Vacuum Rating: Up to 28Hg
Pressure Rating: Up to 60psi
Power Options: 110V-480V, Gas and Diesel
Approximate Dimensions: 48" x 34" x 45"
Fuel Dock Friendly: Yes
Ideal Locations: Marinas, Dry-Storage, & Campgrounds
|
|
KECO offers an extensive line of trailer units that are recognized as the best in the business. Trailer units are ideal for marinas, campgrounds, fuel docks, industrial applications and RV parks.
Our DOT approved trailer units are custom designed to your specifications. Polyethylene tanks, up to 1,025 gallons are mounted onto Single or Double Axle trailers. Depending on the application, trailer units can be powder coated or galvanized. All trailers include pre-wired lighting and allow for easy hook-up to tow vehicles.
Flow Rate: 13-60 gpm
Vacuum Rating: Up to 29Hg
Pressure Rating: Up to 120psi
Power Options: 110V-480V, Gas & Diesel
Fuel Dock Friendly: Yes
Ideal Locations: Marinas, Dry-Storage, Campgrounds, RV Parks
|
|
SP-8
This is a mobile pump with a vacuum system voor draining toilets or suctioning out engine oil from boats. The housing is made from non-corrosive materials and there is a filter to absorb unpleasant odours. Weighs just 40 kg yet is equipped with a 100 litre vacuum tank.
|
|
KECO has developed a manual operated Pumpout cart that carries and attractive price tag without compromising reliability. The model 425 has a 25 gallon capacity holding tank that can be gravity or pressure offloaded. Constructed of corrosion resistant materials, this low-profile cart is perfect for private use, or as a marina backup.
Flow Rate: 8-12 gpm
Vacuum Rating: Up to 16Hg
Pressure Rating: Up to 10psi
Approximate Dimensions: 66" x 30" x 44"
Weight: 87-lbs Empty / 265-lbs Full
Fuel Dock Friendly: Yes
|
|
|
|
|
|
|
The pressures on marina operators are increasing, from customers looking for better facilities, local authorities looking for possible revenue from improved facilities, and people looking for a cleaner environment.
The majority of marinas offer at the very least, fresh water, electricity, telephone, fuel and sometimes gas. In spite of increasing awareness, very few offer Pump-Out Systems for boat sewage disposal, which would provide an instant solution to major pollution criticisms.
The reasons offered for not installing quayside pump-out equipment include a perceived lack of demand, a fear or lack of understanding of boat effluent disposal systems and last but not least, cost.
Electro-Tec can provide several solutions for marinas wishing to provide pump out services, from small canal boat marinas to large mega yacht marinas, any requirement can be accommodated.
Electro-Tec can provide two main solutions:
Communal Pump Out
Positioned in an accessible location such as a fuelling berth, a communal pump out is designed to allow vessels to discharge waste quickly and efficiently. The pump out can be push button, key switch, coin, token or card controlled and can be integrated into the Electro-Tec Sentinel metering products.
Multi Point Pump Out
Designed to provide pump out services, on individual berths, this system consists of a centreal vacuum pump located away from the pontoons (to keep noise levels low) and a vacuum system installed throughout the marina. This allows users to pump out from their berths without having to locate to a communal pump out.
|
|
Keco's Dockside Pumpout system is designed to sit at the "Point-of-Pumpout" and discharge back to a marinas sewer connection. Depending on the discharge requirements, this unit can be equipped with a low maintenance double diaphragm pump, or a heavy duty Peristaltic pump.
The Dockside enclosure includes a hose rack (capable of holding 60' of suction hose), and a variety of different activation controls. Constructed of Hand Laid Fiberglass, this enclosure is also available in Aluminum or Stainless Steel.
Flow Rate: 30-60 gpm
Vacuum Rating: Up to 29Hg
Pressure Rating: Up to 120psi
Power Options: 110V-480V
Approximate Dimensions: 38" x 38" x38"
Fuel Dock Friendly: Yes
Ideal Locations: Fuel Dock, Bulkhead, Fingerpiers
|
|
Keco's 140 Series is a self contained, full service pumpout center. Enclosed in the fiberglass cover is a powerfull diaphragm pump, suction hose on reel, and fresh water rinse hose on reel. Available with both spring and hand rewind hose reels, the model 140 will keep hoses off the ground and under the enclosure.
Keco's rugged diaphragm pump passes solids up to 1.5" in diameter, and can be equipped with a variety of motor options. The 140 Series is a great solution for Marinas, RV parks, Campgrounds, and live aboard facilities.
Flow Rate: 18-25 gpm
Vacuum Rating: Up to 22Hg
Pressure Rating: Up to 15psi
Power Options: 110V-480V
Fuel Dock Friendly: Yes
Ideal Locations: Fuel Dock, Bulkhead, Haul-out, Fingerpiers
|
|
KECO's Stationary units, Models 150/175/200, are convenient, effective and self-contained sanitation systems. The stationary pump is capable of pumping 20-25 gallons per minute, with up to 20' suction lift and 30' discharge head. The fiberglass enclosure functions as hose storage for up to 70' of suction hose, and protects the pump from the elements.
Beneath the fiberglass cover you'll find a powerful sanitation workhorse. All pump components are assembled using non-corrosive materials, and finished with the same innovative three layer coating process found on off-shore oil rigs. This pump is designed specifically for pumping sewage, and can pass solids up to 1.5" in diameter.
Available in any color!!!
Flow Rate: 20-25 gpm
Vacuum Rating: Up to 22Hg
Pressure Rating: Up to 15psi
Power Options: 110V-480V
Approximate Dimensions: 37.5" x 15" x 47"
Fuel Dock Friendly: Yes
Ideal Locations: Fuel Dock, Bulkhead, Haul-out, Fingerpiers
|
|
Centralized Vacuum Systems are designed to provide slip-side and multi-location Pumpout service. Central pumping units (Peristaltic or Vacuum pumps) are intended to sit in a centralized area, while remote pumping centers or dockside hydrants are installed in convenient locations throughout a marina. Plumbing connects the remote pumping center or hydrants to the centralized system, while wireless transmitters or hard-wired remotes placed throughout the marina activate the pump when desired.
Call today for your free consultation.
|
|
Keco's 70 Series Pumpout system features a two piece design which can be joined together, or separated by up to 100' apart. If dock space is limited, placing the pump in a remote location may be the solution. Keco's versatile Remote Pumping Center (RPC) can be equipped with a variety of different control options. The 70 series is available in Stainless Steel or Fiberglass.
The rugged design of the RPC can accommodate up to 70' of suction hose and is built to withstand the constant abuse of daily usage. Keco's 70 Series Pumpout offers a clean, simple, and manageable Pumpout for marinas and clients alike. Available with a Diaphragm or Peristaltic Pump.
Flow Rate: 13-25 gpm
Vacuum Rating: Up to 28Hg
Pressure Rating: Up to 60psi
Power Options: 110V-480V
Fuel Dock Friendly: Yes
Ideal Locations: Fuel Dock, Bulkhead, Fingerpiers & Launch Ramp
|
|
|
The SP-2 would grace any landing stage, being as it is compact and encased in a stainless steel housing. This means it can be installed on the landing stage itself, including in the quay wall, something that lowers the housing by 15 cm. The hose reel can be fitted to the frame or set up separately from the pump. The baseplate frame also functions as a save-all. A coin or token insertion unit can be fitted, as can a card reader.
|
|
Mobile Pump-out unit
208L tank with overflow detector
easy to handle with large tires trailer
silent pumping (no throbbing)
made of marine aluminium and steanless steel
leak detection system
motor 1,5HP with speed variator
|
|
The SaniSailor BilgeMate is a complete bilge water collection and filtration system. The BilgeMate integrates a high suction peristaltic vacuum pump, oil/water separator, oily waste (hydrocarbon) accumulator and Sufficient suction hose for convenient evacuation of oily bilge water from small to mid-size recreational boats. The BilgeMate can operate as a fixed station, but is also transportable on its aluminum can with pnuemauc wheels.
|
|
There are hundreds of these EMP workhorse portable units in operation throughout the US and abroad. Built on a stout tubular aluminum frame with 12 inch pneumatic tires and a 55 gallon holding capacity, the Dockmate will accomplish almost any pumpout job.
|
|
|
|
|
|
|
SaniSailor Portable Pumpouts
SaniSailor Portable Pumpouts are easy to use and very dependable because they use the same proven peristaltic pump technology as the SaniSailor fixed pump lines. SaniSailor Portable units may be used for boat pumpouts or spill recovery purposes.
SaniSailor Portable Pumpouts feature:
• Marine grade aluminum framing - lightweight , strong and rust resistant
• 12” Pneumatic tires – easy transport, better load distribution
• Trailer hitch for mobile transport by cart or tractor
• Two-wheel hitch dolly for easy pulling – turns on a dime
• UV resistant tank - lightweight and long lasting
• 30’ pumpout hose and standard pumpout nozzle with site tube
• 6’ discharge hose with camlock fittings
• 15’ heavy duty power cord with 120V 30Amp marine twistlock plug
• Heavy duty hose rack, cord holder
(Photograph shows SaniSailor DockMate 55)
Model # Pump Type / Motor Flow Rate Tank Capacity
SlipMate 30 Peristaltic / 1.5 HP 120V 10 - 15 GPM 30 Gallons
SlipMate 55 Peristaltic / 1.5 HP 120V 10 - 15 GPM 55 Gallons
DockMate 55 Peristaltic / 3.0 HP 120V 20 - 30 GPM 55 Gallons
|
|
|
|
|
|
|
SaniSailor Mobile Pumpout Systems – Golf Cart
SaniSailor mobile golf cart units are the ideal solution for expansive marina facilities and boatyards that require prompt pumpout service at multiple locations.
SaniSailor Mobile Pumpout Systems are available with 2 models of golf carts or you may choose to purchase the SaniSailor Mobile Pumpout module separately and furnish your own golf cart.
SaniSailor Mobile Pumpouts are easy to use and very dependable because they use the same proven peristaltic pump technology as the SaniSailor fixed pump lines. SaniSailor Mobile units may be used for boat pumpouts or spill recovery purposes.
SaniSailor Mobile Pumpout Units feature:
• Marine grade aluminum framing - lightweight, strong and rust resistant
• UV resistant tank - lightweight and long lasting
• 60’ pumpout hose and standard pumpout nozzle with site tube
• 6’ discharge hose with camlock fittings
• 15’ heavy duty power cord with 120V 30Amp marine twistlock plug
• Options include: choice of peristaltic pumpout unit, golf cart, hose reel, hose bracket, cart accessories
SaniSailor Mobile Pumpout with Golf Cart
Model # Golf Cart Pumpout Motor Tank Hose Reel Hose Hanger
UC-M300 HR C2 Carryall 2 20-30 GPM 3 HP 120V 55 Gallons Yes NA
UC-M300 HH C2 Carryall 2 20-30 GPM 3 HP 120V 55 Gallons NA Yes
UC-S100 HR C1 Carryall 1 10-20 GPM 1.5 HP 120V 55 Gallons Yes NA
UC-S100 HH C1 Carryall 1 10-20 GPM 1.5 HP 120V 55 Gallons
|
|
Pump-out station
silent peristaltic pumping
leak detection system built-in
motor 1,5HP or 3HP, 110 liters/minute
run with on-off button and adjustable timer
fiberglass enclosure
|
|
This system is designed to pump out the waste liquids produced by the yachting (waste water, motor oils). It is composed of 2 main elements:
Pumping bollard installed on the pontoon, removing the liquids directly from the vessel through a flexible pipe (one model specialized for oils and one model specialized for waters). The pumping master plant, installed in the technical room of the marina. All the removed liquids can be filtered, treated and stocked in a special tank before been evacuated. The system is ecological, safe and easy to use. It does not exhale bad smells, can be easily installed and is maintenance-free.
|
|
WillDo manufactures customized discharge pumps for marinas, such as high-speed extraction pumps for quay or pontoon, to extract waste water from visiting boats and pump it into the sewer ashore.
The main pump can serve up to 12 substations.
The discharge hose to the shore may be as long as 15 metres (50ft)! It can be ordered separately in the required lenghts.
The inside hose diameter is 38 mm (1,5'') as a standard.
Based on a holding tank in the boat with a volume of 100 litres (27 Gallons), the unit will require no more than 6 minutes for the total process of pumping, including the connection of the hose.
|
|
The SaniSailor Sentinel M300 is designed for the most standard point of pumping application. Use the M300 with one pumpout location or several in close proximity, as on a fuel dock or convenience dock. The Sentinel M300 is designed for pumping out at up to 30 gpm, where the septic system is no more than 30ft. above the system.
|
|
This central vacuum system is a workhorse unit which will deliver 28" of vacuum to many hydrants or stanchions. This system is designed for applications requiring both hydrants at individual slips, and stanchions at common locations, within the same general area i.e. on one pier.
|
|
This SaniSailor SlipSide S100 is for smaller marinas and yacht clubs where pumpouts are important, but usuage and volumes may be low.
The SaniSailor SlipSide S100 operates idealy in the 10-15 gallon range and is suitable for facilities with boats that have smaller holding tanks (30-60 gallons)
|
|
Rolec offer a comprehensive range of 'free-to-use' or 'pay-to-use' sanitation pump-out systems to suit every budget.
Communal pump-outA range of communal pump-out pedestals are available, these can be installed by Rolec or can be supplied with simple installation instructions for you to install.
Multi-point pump-out systemsRolec can design, install and commission multi-point pump-out systems with up to 100 pump-out points on a single marina.
|
|
- Pump Capacity: 60 l/min
- Motor power: 750W
- Weight: 95kg Max.
- Suction height: 6m Max.
- Discharge horizontal: 120m Max.
- Pressure height: 15m
- Connection (inlet): 1½" hose
- Discharge 2"
|
|
|
|
|
|
|
The strongest model in the range of the Rheinstrom Pump-out Stations. With a capacity of up to 18 cbm/h ( 300 l/m) the pump S300 is one of the strongest pump on the market.
The well known advantages from the Rheinstrom Pump-out Stations like
a housing in brushed stainless steel, full removable doors, a solid hose rail with internal holder of the pump-out nozzle are a standard on this plant. Due to the coin insert which is placed on the front door of the plant
the Pump-out Station will be controlled. As an option the control mechanism can be changed to key switch, tokens or card reader.
The inspection of the pump can be done through the removable front door. The plant will be delivered ready for use including a high flexible suction hose (15m) and a Pump-out connector concering ISO 8099.
Datas:
Dimension (WxDxH): 750x800x1200mm
With hose rail : 950x800x1200mm
Voltage : 230V / 400V
Consumption : 3,0 kW
Suction hose : 15m
Capacity : 300 l/min
Max. Distance : 200m horizontal
Max. Press. hight : 15m
Weight : 250 kg
- Can run dry without damage
- Selfpriming up to 9.5m
- Quiet operation
- Easy in usage and service
- Only one spare part in the pump
|
|
Performance:
Volume:
Up to 100 GPM / 379 LPM
Installation Volume:
As Required
Dry Suction Lift:
to 25 ft / 7.6m
Discharge Head:
to 23 ft / 7 m
Features:
Tank:
235 Gallon Capacity
Durability:
Oil Protected Vane Air Pump, Stainless Steel Manual Vacuum to Pressure Control Valve
Safety:
Sight Glass, Primary and Secondary Traps
Convenience:
Electric Motor Drives or Gasoline Engine Drives with Manual or Electric Starts
|
|
Environment station BORG1 is the simple and flexible solution for the reception of sewage and watery waste oil, and it's equally suitable for marinas, camping sites and petrol stations.
BORG1 is efficient, hygienic and odourless and solves all of the various aspects involved in receiving. Based on a practical module system, it is adaptable to all individual financial and volume requirements, now and in the future.
The design qualities of BORG1 have been honoured with two distinguished awards:
the Danish ID prize and the German IF Industrie Forum Design Award 2000.
|
|
|
|
